• 유기물자원화
• /
• 제21권4호
• /
• pp.62-71
• /
• 2013

본 연구는 돼지분뇨 슬러리를 이용하여 혐기소화 하는 과정에서 소화원료 중에 포함된 고형물의 크기를 감소시키는 전 처리 기술의 적용에 따른 메탄생성 효율을 분석하기 위하여 수행되었다. 소화원료의 입자 크기 감소는 혐기소화 과정에서의 가수분해 정도를 높여서 혐기소화 효율을 증진시킨다. 본 시험에서 적용한 전 처리 방법으로는 오존을 이용한 방법, 캐비테이션을 이용한 방법 그리고 분쇄장치를 이용하여 물리적으로 고형물 크기를 줄이는 방법 등을 적용했다. 전 처리 방법에 따른 메탄가스 발생량은 분쇄 방법, 오존 적용, 캐비테이션 적용 방법 순으로 높게 나타났으며, 두 가지의 전 처리 방법을 병합하여 적용하는 복합공정으로 처리하였을 경우에는 분쇄 처리 후 오존 처리, 캐비테이션 처리 후 오존 처리, 분쇄 처리 후 캐비테이션 처리를 적용하는 순으로 전 처리효과가 높게 나타났다. 돼지분뇨 슬러리를 두 가지 조합의 병합 공정으로 처리하였을 경우 단독 공정에 비해 메탄 발생량이 약 20% 이상 증가하였다. 평균 메탄함량 역시 분쇄 처리 후 오존 처리를 병합한 처리구에서 높게 나타났다. 돼지분뇨 슬러리를 소화원료로 이용하여 시험용 소화조 운영하였을 때 가스 발생량 평균값과 메탄의 평균농도는 전 처리를 하지 않은 경우에는 각각 298.8L와 55.7%인 반면에 전 처리를 실시한 시험구에서는 각각 325.9L와 59.7% 수준을 나타냄으로써 돼지분뇨 슬러리의 경우에서도 전 처리의 효과가 있는 것으로 나타났다. 전 처리를 하였을 경우가 처리하지 않은 구에 비해 바이오가스 중의 메탄함량은 높고 CO2 함량은 상대적으로 더 낮게 나타났다. 돼지분뇨 슬러리에 대해 전 처리를 수행하였을 경우가 전 처리를 하지 않은 경우에 비해 유입 VS당 가스발생량도 더 많았다.

• 한국축산시설환경학회지
• /
• 제19권1호
• /
• pp.47-54
• /
• 2013

Two types of reactors were set to investigate the change of characteristics of pig slurry by aeration during fertilization period. One system was equipped with air diffuser to supply oxygen to pig slurry for liquid fertilization, but there was no air diffuser in the other system. Air supply to the experimental systems was regulated by air flow meter. The reactors were set up in the laboratory to protect the pig slurry from external condition such as temperature and humidity changes. Maintaining optimal pH range in the experimental reactors is an important factor for liquid fertilization of pig slurry. In this study, pH ranges of aerobic reactor and anoxic reactor was 7.04~7.19 and 7.34~7.81, respectively. The temperature of aerobic reactors was $2{\sim}3^{\circ}C$ higher then indoor temperature. The amount of sludge accumulated at the bottom layer of non-aerated reactors was 4~5 times more than that of aerated reactors.

• 한국입자에어로졸학회지
• /
• 제5권4호
• /
• pp.189-197
• /
• 2009

Wet-type particulate removal system is employed in most of ironmaking processes. These de-dusting systems require additional downstream aggregates for treatment of water and for drying of the collected slurry. Thus dried slurry can be pressed in shape of briquettes and recycled in the steelmaking process. Different from the wet-type, the dry-type particulate removal systems generate no slurry. A high-temperature, high-pressure de-dusting system with inertial inlet was developed. The target application of this system was to remove particulate matter generated from the novel ironmaking process and other steelmaking processes. In this study we conducted tests with this newly developed system to evaluate the performance of the silica-carbide (SiC) ceramic filters. In addition, for purpose of comparison, we also conducted tests with a unit which has conventional direct inlet. Fe-Particles collected from the novel ironmaking process were used in our tests as test dusts. The temperature and the pressure were kept constant at their respective values $800^{\circ}C$ and $3kg_f/cm^2$.

• 설비공학논문집
• /
• 제18권7호
• /
• pp.571-577
• /
• 2006

The characteristics of ice packing factor (IPF) at the ice slurry system using one line type are compared with the system using two lines type. The installation space for one transporting line is saved at the one line system. For the one line type, the ice packing factor is reduced along the downstream, but for the two lines type, the ice packing factor is fixed. For the one line system, mass flow rate in the main line is fixed along the down-stream, but for two lines system, the mass flow rate in the main line is reduced along the downstream. For one line system, along the down stream after IPF=0, the temperature at the main steam is increased, and the extracted mass flow is increased. The initial IPF, at which the IPF is not arrived at zero upto the final node, is proposed for the B area.

• 한국축산시설환경학회지
• /
• 제15권3호
• /
• pp.217-224
• /
• 2009

1. 여재순환장치는 사각프레임 형태로 설계 제작하였으며, 고액분리장치, 여재순환구 동축 및 날개, 압축공기 분사장치와 여재 및 액비배출장치로 구성되었다. 2. 고액분리한 돈슬러리를 장치에 투입하여 가동을 한 결과, 톱밥을 여재로 이용했을 때 $BOD_5$는 52.8, $COD_{Mn}$ 57.3, SS 26.9, T-N 71.0, T-P 30.9% 수준으로 감소하는 것으로 나타났으며, 왕겨를 이용한 경우에도 톱밥과 비슷한 경향을 나타내었다. 3. 5회까지 순환시켜 침출된 액비의 비료 성분은 질소의 경우, 원슬러리에 비해 2/3 수준, 인산은 1/3 수준으로 줄어드는 경향을 나타냈으나, 칼리는 거의 변하지 않는 것으로 나타났다. 4. 침출액비의 악취 (암모니아, 황화수소)는 초기에 비해 상당한 수준으로 저감되었으며, 톱밥이 왕겨에 비해 비교적 효과가 높은 것으로 나타났다. 5. 여재순환장치 가동 전후의 돈슬러리내 미생물을 조사한 결과, 총세균과 부숙에 관여하는 것으로 추정되는 바실러스균은 증가하는 경향이었으며, 살모네라균은 급격하게 감소하는 경향을 보였다. 6. 이상과 같은 결과로 볼 때, 악취저감 균질액비 생산장치를 이용하여 액비를 생산할 경우, 오염물질, 악취물질, 병원성세균 등이 감소하고, 부숙관여 유용미생물이 증가한 악취저감 균질액비 생산이 가능한 것으로 판단된다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제30권3호
• /
• pp.382-388
• /
• 2006

This study experimented to understand the effect of transporting ice slurry through in pipe with valve. And at this experiment it used ethylene glycol-water solution and a concentration is 30wt%. The experimental apparatus was constructed of ice slurry generation tank, turbo flow meter, manometers for differential pressure measuring, PIV system for flow pattern measuring. illumination and along a horizontal circular tube with valve as test section. The experiments were carried out under various conditions, with velocity of fluid at the entry ranging from 0.5 to 1.5 m/s and concentration of IPF is 30%. Also valve open rate is 50%, 75%, 100%.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.1245-1252
• /
• 2010

Many industrialized countries are confronted with a difficulty about reuse of closed waste landfill. facilities. Especially, the demand of closed waste landfill maintenance and reuse nearby urban area has been increased, because of the shortage of usable land and extend of urban area. For the safe reuse of closed waste landfill, the most important check point is the effect of waste landfill on environment abound them. However, the non-sanitary closed waste landfill generally have no leachate lining system, therefore, the in-situ lining system such as sheet-pile, and vertical slurry wall etc. was needed to prevent the leachate outgoing from the waste landfill. In this paper present the case history of performance evaluation of vertical slurry wall by tracer tests.

• 설비공학논문집
• /
• 제16권11호
• /
• pp.1028-1034
• /
• 2004

Recently, the ice storage system using ice slurry has been used increasingly since it has been introduced where the rapid cooling load change is required. Because it overcomes a decrease of the melting performance and an increase of the thermal resistance on the ice layer in static ice thermal storage system. This study is performed to understand the effects of transporting ice slurry through horizontal, vertical and inclined tubes ($30^{\circ},\;45^{\circ}$). It used propylene glycol-water solution and ice particles (diameter of about 2 mm) in this experiment. The experiments were carried out under various conditions, with concentration of water solution ranging from 0 to $20wt\%$, and velocity of water solution at the entry ranging from 1.5 to 2.5 m/s. The results were as follows: Regarding the angle of inclined tube, the highest pressure loss was measured for vertical tube and the pressure loss for $45^{\circ},\;30^{\circ}$, horizontal straight tubes were lower successively. The lowest pressure loss in these tubes was measured at velocity of $2.0{\sim}2.5m/s$ and concentration of $10wt\%$. The outlet IPF was likewise stable in these ranges.

• 한국항해항만학회지
• /
• 제34권1호
• /
• pp.71-75
• /
• 2010

아이스슬러리의 생성을 위하여 냉각평판에 작동수를 분사하는 실험을 수행하여 그에 대한 영향에 대하여 영향을 평가하였다. 실험에 사용된 에틸렌글리콜 수용액은 10~20wt%의 수용액을 사용하였다. 실험장치는 슬러리아이스 저장탱크, 브라인 탱크, 브라인 순환장치, 유량계 및 온도기록계로 구성되어 있다. 실험조건은 평균유속 1.0~2.0m/s, 냉각온도 $-17{\sim}-10^{\circ}C$의 조건 하에 실험을 수행하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.286-291
• /
• 2001

This paper describes an optimal scheduling for ice slurry systems for energy cost saving. The optimization technique applied in the study is the dynamic programming method, for which the state variable is the storage in the ice storage tank and the control variable is the state of chiller's on-off switching. Though the costs during charge period is included in optimization by taking the average cost of ice per hour for slurry making, the time horizon for the simulation is limited building cooling period because accurate charge rate from the ice maker into the ice storage tank cannot be estimated during the charge period. In the operating simulation after optimizing procedure, energy consumption and operating cost for the optimal control are calculated and compared with them for a conventional control with one case of cooling load profile.