• Applied Chemistry for Engineering
• /
• v.8 no.5
• /
• pp.804-810
• /
• 1997

A new catalyst system composed of a main catalyst(copper chloride) and promotors of zinc chloride, tin, and cadminum showed excellent performances in the MCS synthesis from silicon and methylchloride. The mixture of catalyst/silicon(5/95), Zn/Cu=0.1, Sn/Cu=0.001, and Cd/Cu=0.001 was mixed in a slurry phase and activated into the contact mass, then it was used for MCS synthesis. The average selectivity was 92% at the silicon consumption of 92% and reaction rate was 175(g-MCS/hr.kg-silicon) at conversion of silicon.

• Environmental Engineering Research
• /
• v.13 no.4
• /
• pp.203-209
• /
• 2008

This paper presents the experimental results in five months operation from a combined anaerobic/oxic system treating swine waste with average concentrations in organic matter and nitrogen of 7,930 mgCOD/L and 671 mgTKN/L, respectively. The system was formed using an upflow anaerobic sludge blanket (UASB) reactor and oxic reactor connected in series with a recycling line of oxic effluents to UASB for its denitrification. The UASB reactor was operated at an organic volumetric loading rate (VLR) of $2.1{\sim}4.5\;kgTCOD/m^3$/day and the removal efficiency of TCOD was $66.3{\sim}85.4%$. The overall removal efficiency of TCOD was more than 99%. The oxic reactor was operated at a nitrogen VLR of $0.10{\sim}0.20\;kgTKN/m^3$/day and the nitrification efficiency was 75%. However, the complete denitrification was observed in the UASB reactor that was due to the optimal temperature and sufficient carbon source. The overall removal rate of TN was about 80%. About 76.2% of the influent COD mass was accountable in a COD mass balance at a level of VLR $3.64\;kgCOD/m^3$/day. The production rate of methane was $0.32\;LCH_4/gCOD_{removed}$ when influent organics, VLR, were recorded by $3.4{\sim}4.5\;kgCOD/m^3$/day.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.19 no.10
• /
• pp.710-717
• /
• 2007

Electric and telecommunication industries are constantly striving towards miniaturization of electronic devices. Miniaturization of chips creates extra space on PCBs that can be populated with additional components, which decreases the heat transfer surface area and generates very high heat flux. Even though an air-cooling technology for telecommunication equipment has been developed in accordance with rapid growth in electrical industry, it is confronted with the limitation of cooling capacity due to the rapid increase of heat density. In this study, liquid-cooling heat exchangers with MPCM slurries were designed and tested by varying geometry and operating conditions. The liquid-cooling heat exchangers with 4-paths showed higher cooling performance than the others. The cooling performance of liquid cooling heat exchanger with MPCM slurries was more enhanced than that of the air cooling system. It's performance was also slightly superior to that of the water cooling system at the inlet temperature of $19^{\circ}C$.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.11 no.3
• /
• pp.35-42
• /
• 2011

The exterior system of buildings, which is the typical curtain wall, has been made with glass and metal. Theses materials, however, have weaknesses such as inadequate insulating quality, short durability, combustibility and toxic substance. On the other hand, Autoclaved Aerated Concrete(AAC) or Autoclaved Lightweight Concrete(ALC) possess the great energy efficiency and the superb insulating quality as substitute of existing exterior system materials. In this research, strength characteristics and bubble dispersion of hydrothermal synthesis process of AAC based on CaO/$SiO_2$(C/S) ratio are analyzed. C/S ratio is determinated and bubble distribution and compressive strength are studied through the test of varied water-to-solid mineral ratio(W/S). In hydrothermal synthesis program, final C/S ratio is determined as 0.7 consider of the manufacturing process and hydrothermal synthesis is done at $180^{\circ}C$ for 7 hours. The analysis shows slurry has about 2,300cP viscosity and 0.56 specific gravity therefore it is expected AAC has the appropriate facility in the manufacturing process and Hydrates of AAC's Expansion.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.03a
• /
• pp.1039-1046
• /
• 2005

After clay particles have been sediment isotropically, the clay deposits have been consolidated under $K_0$-stress system. Therefore, in order to predict the behavior in-situ of normally consolidated clays, the laboratory test should be enforced under $K_0$-stress system and should obtain the characteristics of normally consolidated clays. And relationship of stress-strain on clay is effected on not only method of consolidation but also characteristic of visco-plastic behavior. Saturated clay is effected more this trend. So, rate of strain is considered to understand exact stress-strain relationship. In this study, the series of undrained triaxial compression tests were preformed on remolded specimens which was made by slurry of clay, consolidated under $K_0$-stress systems. And the undrained triaxial compression test were preformed to examine behavior of stress-strain relationship due to rate of shear strain relationship due to rate of shear strain.

• Journal of the Korean Ceramic Society
• /
• v.33 no.11
• /
• pp.1267-1275
• /
• 1996

Green sheet was prepared by tape casting in the composition of (1-x)Pb(Mg1/3Nb2/3)O3-PbTiO3 system using Pb(Mg1/3Nb2/3)O3 and PbTiO3 synthesized with PbO, Nb2O5 MgO and TiO2 The densest green sheet was obtained in the weight ratio 70:30 of powder to binder. Green sheet wasmultilayered in metal mould and formed into lamination at 7$0^{\circ}C$, 300kg/cm2 The lamination was sintered at 110$0^{\circ}C$ 2hr, Dielectric constant and Curie temperature of disc type sintered body was highered with increasing the amount of PbTiO3 and was in the range of 19000-21000, -7~45$^{\circ}C$ respectively. Green and sintered relative density of lamination was 61% and 95% respectively.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.915-918
• /
• 1997

An internal finishing process by the application of magnetic abrasive machining has been developed as a new technology to obtain a fine inner surface of pipe. In this paper, an abrasive circulation system was designed and manufactured. As a result, it was found that a fine inner surface abrasive of pipe was available by the use of this machining methods. The basic machining characteristics of pin-type magnetic tools were analyzed experimentally. In addition, the experimental results show that we can realize that pin-type magnetic tools have more machining efficiency than iron particles as magnetic tools.

• Journal of Power System Engineering
• /
• v.20 no.5
• /
• pp.86-91
• /
• 2016

This paper is concerned chiefly with the method of porous foam manufacture using basalt stone powder sludge. The hydrogen peroxide($H_2O_2$) of bloating agent has lots of problems to manufacture porous lightweight aggregate due to fast reaction rate with cement or calcium hydroxide($Ca(OH)_2$). The $H_2O_2$ injecting method using nozzle for manufacturing porous lightweight aggregate is proposed, in this study. This method is to inject $H_2O_2$ at the pressure of 10 MPa on upper side of slurry mixing materials such as stone powder sludge and quick-lime(CaO) by injector. The specimen was dried in furnace at $100^{\circ}C$ for 1 hour and cured at ambient temperature for 30 days. We analyzed the characteristics including specific gravity and water absorption. The experiments were found that the porous foam has low specific gravity, high water absorption and uniform distribution of porous more than manufactured foam by general bloating methods.

• Advances in environmental research
• /
• v.2 no.2
• /
• pp.131-141
• /
• 2013

Agricultural practice and improper waste disposal in developing regions have resulted in environmental degradation in land and waters, for which low-cost, proven solutions are needed. We demonstrate in the laboratory the applications of composting and trickling filter techniques to treat olive mill wastes that can be implemented in the West Bank and other regions of the world. To a pomace waste sample from a California mill, we amended with saw dust (wood carbon source) and baking soda ($NaHCO_3$ alkalinity) at weight ratios of waste/wood/$NaHCO_3$ at 70:27:1 and composted it for periods of 11 and 48 days; the compost was used as an additive to potting soil for transplanting. The pomace sample was also blended into slurry and introduced to a water-circulating pond and trickling filter system (P/TF) to examine any inhibitive effect of the pomace on biological removal of the organic waste. The results showed the compost-amended potting soil supported plant growth without noticeable stress over 34 days and the P/TF system removed BOD and COD by >90% from the waste liquid within 2 days, with a first-order rate constant of 1.9 $d^{-1}$ in the pond. An onsite treatment design is proposed that promises implementation for agricultural waste disposal in developing regions.

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.3
• /
• pp.415-424
• /
• 2011

This research was conducted to verified the effectiveness of a sintered porous media coated with organic matter as nutrient source and microorganisms as decomposer effective in TPH decomposition for a closed-typed biopole system. The organic matter content in the sintered porous media which was developed with bentonite increased with increasing dilution ratio of pig slurry and the sintered porous media as well as decrease in the particle size of sintered porous media. The decomposition rate of TPH was significantly increased with increasing aeration than that under atmospheric condition. Also the sintered porous media containing organic matter and microorganisms proved that the decomposition was enhanced with addition of nutrients sources in addition to aeration periodically.