• Journal of the Korea institute for structural maintenance and inspection
• /
• v.10 no.5
• /
• pp.106-114
• /
• 2006

This paper investigates the fundamental properties and shrinkage characteristics of low shrinkage high performance concrete(LSHPC), using mock-up specimens. According to the test results, the most suitable mix proportions of LSHPC need a higher dosage of SP agent and AE agent, in order to obtain the target of slump flow and air content. This is due to reduce fluidity and air content respectively. It also presented earlier setting time than control concrete by 6 hours and exhibited compressive strength of 60MPa at age 28 days. Autogenous shrinkage of LSHPC was the half of the value of control concrete. Drying shrinkage of center section of LSHPC showed similar tendency with autogenous shrinkage, because of no internal moisture movement, while surface section had larger drying shrinkage. The specimen with embedded reinforcing bar had smaller deformation owing to confinement of reinforcing bar.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.1 no.2
• /
• pp.193-224
• /
• 2006

When we look into the market economy of our country recently, we learn that the mind of consumption after IMF crisis is very shrunk and the market is led into a serious slump of consumption. For an approach to survive the contraction of the market and the market competition, enterprises command a variety of sales promotion strategy, out of which presentation is a sales promotion strategy to give the same product. The price-discounted strategy through the provision of donation commodity may induce the temporarily-discounted commodity not to be sold to the consumers or make a damage of the images of the brand, or arouse the price war against other companies, or lower the sense of the quality of the commodity. Therefore, it is necessary for a company to meet the end users' demand and also maintain the evaluation of the quality on the consumers' products highly. Therefore, in this study, we have attempted to study and analyze the consumers' satisfaction level and reliability on the donation goods in order to suggest the orientation of the presentation promotion strategy in accordance with the changes of the sales market. In addition, we tried to understand how the recognition, consumers' satisfaction level and reliability on the presentation goods had on the repurchase. With such objectives in this study, we could make an analogy of the following significance and suggestion of study. Firstly, in order to survive a serious competition market, enterprises must execute the product presentation along with diverse events instead of commanding the sales promotion strategy through a simple product presentation. This strategy can be an alternative to lower the danger a person-to-person product presentation may bring about. That is to say, we shall not lower the quality and value of the products but enhance a new image to customers through a product donation occasion together with an event as a new marketing pioneering method. Secondly, during the period of the current economic depression, if a company provides the consumers with an opportunity free of charge through the present special event period and the practical events, it will affect the advertising effect of the goods, the introduction of the customers and customers' repurchase. For this purpose, the company has to heighten customers' preferences by selecting the items customers are liable to prefer and closely analyze the consumers' response and market for such an objective. Thirdly, with the internet age, as the market has a tendency to increase In the number of consumers who do shopping in the internet, the marketing strategy has to build up the strategy of the presentation product instead of a simple offline strategy. For example, a company shall have to draw attention or attraction from end users who intend to do shopping through the online by a product planning expo or a presentation product corner. Fourthly, the excessive sale promotion strategy of presentation products may bring about even a reverse effect on the value of the goods or consumers' attitude as seen above. Therefore, a company has to relay' the value as to the price' to the consumers instead of the sales promotion strategy of donation products just for a temporary sales volume. Conclusively, even if we put the value with a reasonable price through the presentation product strategy in the past, we shall have construct the strategy by providing some plus factors in the price such as the provision of the upgraded products or services instead of just presentation, or the invitation of the events related to diverse events or culture arts from now on.

• 한국벤처창업학회:학술대회논문집
• /
• 2007.04a
• /
• pp.375-404
• /
• 2007

When we look into the market economy of our country recently, we learn that the mind of consumption after IMF crisis is very shrunk and the market is led into a serious slump of consumption. For an approach to survive the contraction of the market and the market competition, enterprises command a variety of sales promotion strategy, out of which presentation is a sales promotion strategy to give the same product. The price-discounted strategy through the provision of donation commodity may induce the temporarily-discounted commodity not to be sold to the consumers or make a damage of the images of the brand, or arouse the price war against other companies, or lower the sense of the quality of the commodity. Therefore, it is necessary for a company to meet the end users' demand and also maintain the evaluation of the quality on the consumers' products highly. Therefore, in this study, we have attempted to study and analyze the consumers' satisfaction level and reliability on the donation goods in order to suggest the orientation of the presentation promotion strategy in accordance with the changes of the sales market. In addition, we tried to understand how the recognition, consumers' satisfaction level and reliability on the presentation goods had on the repurchase. With such objectives in this study, we could make an analogy of the following significance and suggestion of study. Firstly, in order to survive a serious competition market, enterprises must execute the product presentation along with diverse events instead of commanding the sales promotion strategy through a simple product presentation. This strategy can be an alternative to lower the danger a person-to-person product presentation may bring about. That is to say, we shall not lower the quality and value of the products but enhance a new image to customers through a product donation occasion together with an event as a new marketing pioneering method. Secondly, during the period of the current economic depression, if a company provides the consumers with an opportunity free of charge through the present special event period and the practical events, it will affect the advertising effect of the goods, the introduction of the customers and customers' repurchase. For this purpose, the company has to heighten customers' preferences by selecting the items customers are liable to prefer and closely analyze the consumer's response and market for such an objective. Thirdly, with the internet age, as the market has a tendency to increase in the number of consumers who do shopping in the internet, the marketing strategy has to build up the strategy of the presentation product instead of a simple offline strategy. For example, a company shall have to draw attention or attraction from end users who intend to do shopping through the online by a product planning expo or a presentation product corner. Fourthly, the excessive sale promotion strategy of presentation products may bring about even a reverse effect on the value of the goods or consumers' attitude as seen above. Therefore, a company has to relay 'the value as to the price' to the consumers instead of the sales promotion strategy of donation products just for a temporary sales volume. Conclusively, even if we put the value with a reasonable price through the presentation product strategy in the past, we shall have construct the strategy by providing some plus factors in the price such as the provision of the upgraded products or services instead of just presentation, or the invitation of the events related to diverse events or culture arts from now on.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.18 no.5
• /
• pp.211-216
• /
• 2008

The artificial lightweight aggregate (ALA) was manufactured in a rotary kiln at $1125^{\circ}C$ using green body formed by pelletizing the batch powder composing of coal bottom ash (CBA) produced from power plant, clay and dredged soil (DS). The TCLP (Toxicity characteristic leaching procedure) results showed that the dissolution concentration of heavy metal ions of ALA fabricated in this study was below the limitation defined by the enforcement regulations of wastes management law in Korea. The ALA containing 60$\sim$70 wt% CBA had a bulk density of 1.45$\sim$1.49 and a water absorption of 17.2$\sim$18.5 %. The impact values for oven-dry state and saturated-surface dry state of ALA were 27.4$\pm$1.3 and 23.4$\pm$2.6 % respectively. The 28-days compressive strength of concrete made with various ALA was $22.7\sim27.8 N/mm^2$. The slump of concrete with ALA containing CBA 60 and 70 wt% were 7.9 and 14.3 cm respectively. The unit weight of concrete made with any ALA fabricated in this study was satisfied with the standard specifications of lightweight concrete for the civil engineering and construction presented by Korea as below $1.84 ton/m^3$.

• Journal of the Korea Institute of Building Construction
• /
• v.10 no.4
• /
• pp.11-20
• /
• 2010

This study carried out a Mock-up test to apply Low-heat Cement (CF) that is adjusted to a fineness of $3,000\;{\pm}\;200\;cm^2/g$ by substituting Coarse particle Cement (CC) and fly ash with ordinary Portland Cement (OPC), then applied it on-site. The result of the test is as follows. The Mock-up test showed that the amount of admixture in CF increased SP agent and AE agent slightly more compared to OPC, while temperature history showed that the highest temperature of CF was around $6{\sim}10^{\circ}C$ lower than that of OPC. Compressive strength in CF was low compared to that of OPC, but the strength width became narrow at the age of 28 days, which is not considered to be significant. In on-site application, slump, air content and chloride content all satisfied the target values, while the temperature history showed that the highest temperature in the center by each cast was about $34^{\circ}C$ in the first cast, $42^{\circ}C$ in the second cast, and $39^{\circ}C$ in the third cast. Compressive strength of specimen for strut management showed low value compared to standard curing, but its strength was reduced at the age of 28 days.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.23 no.1
• /
• pp.17-26
• /
• 2017

In order to confirm European packaging waste statistics, this study was investigated annual variability of packaging waste generated, target of recovery and recycling rate for packaging waste and recycling rate of European countries based on Eurostat database. Eurostat is regional society statistics organization designated by European community to distribute development, production and European statistics. From 2005 to 2013, paper and paperboard packaging were generated the largest amount among the total amount of packaging waste generated during the period and the share of main packaging materials were generally constant among the packaging materials. In addition, European Union member countries have established target for the recycling rate and recycling rate for packaging waste which has been well maintained by most EU countries since the 2008 directive was enacted. The recycling rate for whole packaging waste such as glass, paper and paperboard, metal, plastic, wood continues to increase in Europe. In this study, Europe packaging waste statistics were organized and analyzed as yearly transformation of Europe packaging waste occurrence and disposal, recycling rate and recovery rate target value of Europe countries and recycling rate of each country in Europe base on centralized Eurostat database. Moreover GDP reduction were also confirmed due to trend changes and indirect impacts such as economic slump by packaging waste and recycling.

• Journal of the Korea Concrete Institute
• /
• v.15 no.6
• /
• pp.840-847
• /
• 2003

Recently, the coal-ash production has been increased by increase of consumption of electric power. So it is important to secure a reclaimed land and treatment utility for coal-ash. This is an experimental study to compare and analyze the engineering properties of concrete according to W/C and replacement ratio of bottom ash. For this purpose, the mix proportions of concrete according to W/C(40, 50, 60%) and replacement ratio of bottom ash(0, 10, 20, 35, 50%) were established, and then tested for slump, chloride content, setting time, bleeding content, compressive strength. Also the durability test of concrete with W/E 60% was performed. According to test results, it was found that the bleeding content of concrete decreased as the replacement ratio of bottom ash increased. And the chloride content of concrete using the bottom ash increased as the replacement ratio of bottom ash increased, but it is satisfied with the chloride content of fresh concrete $0.30kg/m^3$ below("concrete standard specification" regulation value). The compressive strength of concrete using the bottom ash was similar to that of BA0 concrete after 28 days of curing and the carbonation depth of concrete was increased according to increase of the replacement ratio of bottom ash.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.6
• /
• pp.63-72
• /
• 2012

The high-flowing concrete requires additionally or excessively more expensive admixture than conventional concrete. So, the concrete has not to be widely used in practical field due to the increase of production price, need of additional facilities, and excessive development of concrete strength in associate with addition of too much cementitious material even though it has more significant advantages than conventional concrete. Thus, this study aims at developing high-flowing concrete with general strength unlike high strength which has been carried out in conventional study. To observe the role of aggregate in the concrete quantitatively and to increase the performance of high-flowing concrete effectively, parametric studies were carried out such as W/C, s/a, fineness modulus of aggregate, contribution degree of particle sizes, and the effect of 13mm aggregate and fine stone powder as a partial replacement of aggregates. And the effect of these factors on performance of the concrete was evaluated by measuring slump-flow and gap of penetration height in U-typed instrument. As a result, it was found that flowability of high-flowing concrete depends upon grading of fine aggregate more significantly than that of coarse aggregate and is enhanced greatly as fineness modulus of fine aggregate decreases and the value of s/a increases. In addition, the application of 13mm aggregate and fine stone powder are expected as a partial replacement of aggregate in order to increase the performance of high-flowing concrete more effectively.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.769-772
• /
• 2008

The problem of disposing construction waste materials has become a national and social problem. Recycled powder generated in the process of making aggregate, and the recycled powder is land-filled in its entirety. Results of toxicity testing of recycled power show that it contains base-pair substituent mutagenicity. As recycled powder is disposed of as landfill, it can cause secondary contamination such as soil and underground water contamination. There has been very little research made on recycled powder. This study has examined the utilization of concrete mixture by using recycled powder in a mixture instead of cement and compared and analyzed the characteristics of dynamics and workability. This study has examined the application of recycled powder in concrete. Depending on the replacement rate and workability, test piece was manufactured using different mixing rate by CP, WCP, PCP. The CP was used to examine the physical property of concrete and characteristics its dynamics. The letters W of WCP and P of PCP are the initials of water and mixture. They were made using the standard mixing ratiosemphasizing the workability to determine the characteristic of dynamics of concrete based on the mixing ratio of recycled powder. With the increase in the replacement rate, CP had very little change in the strength. But with the decline of slump, the workability was not good. The result of manufacturing WCP and PCP using the standard mixing ratio showed that WCP had a drop in strength compared to the plain. PCP had almost the same value as the plain only when the replacement rate was 10%. When it was higher than that, a reduction in strength was observed.

• Magazine of the Korea Concrete Institute
• /
• v.6 no.4
• /
• pp.113-122
• /
• 1994

To examine the applicabilty of the converter furnace slag from iron-works as concrete aggregate respective concrete furnace slag with contents of 20%. 40%, 60%. 80% were mixed with granulated slag, and the strength and stability tests for these specimens were followed. The slump value of the concrete mixed with converter furnace slag was higher than that of the conventional concrete. Furnace slag and granulated slag was increased as the increase of converter furnace content. The strength of the concrete mixed with converter furnace slag and granulate slag increased as an increase of converter furnace content and age. The expansion rate of the concrete mixed with converter furnace slag and granulated slag increased from 0.007% to 0.19% as the converter furnace content changed from 20% to 80%. From the above results in the strength and expansion rate, the concrete with the converter furnace content of 40% was considered to be recommandable for the stable construction of the concrete. Calculated formulas for tensile strength(${\sigma}_t$) and flexural strength(${\sigma}_f$) from the regression a.nalysis of the correlations among these compressive strength (${\sigma}_c$), tensile strength and flexural strength are as follows. ${\sigma}_t$ = 0.16952${\sigma}_c$ - 4.9313 ${\sigma}_f$ = 0.25727${\sigma}_c$ + 6.0528