• Human Ecology Research
• /
• 제54권6호
• /
• pp.565-574
• /
• 2016

This research examined the trajectories of peer rejection in preschool children. This study also investigated the gender differences in the intercept and slope of the trajectories for peer rejection along with the influences of aggression, withdrawal and language ability on the trajectories of peer rejection. A latent growth curve model investigated peer rejection in 3 to 5 year olds. Three hundred and thirteen 3-year-old children were recruited from five preschools and 14 daycare centers. The children's language ability was measured by a Wechsler Preschool and Primary Scale of intelligence verbal test and teachers completed measurements for aggression and withdrawal. A peer nomination inventory was used to assess peer rejection. Children were asked to nominate three classmates who they do not like to play with. The research findings showed that peer rejection decreased during the preschool years. Compared with girls, boys showed higher levels of peer rejection and a slower change rate of peer rejection. Girls who were aggressive showed high levels of peer rejection and a slow change rate of peer rejection. Moreover, girls who had a high levels language showed low levels of peer rejection and a slow change rate of peer rejection. These findings imply that language ability could be a protective factor of peer rejection for girls.

• 한국세라믹학회지
• /
• 제30권8호
• /
• pp.664-670
• /
• 1993

Potassium tetratitanate (K2Ti4O9) and Potassium hexatitanate (K2Ti6O13) fibers have been prepared by the slow-cooling calcination process in a temperature range from 125$0^{\circ}C$ to 95$0^{\circ}C$ using the K2CO3 and TiO2 as the starting materials. Optimum fiber growth conditions have been also investigated by changing the physical parameters, such as calcination time and temperature, and cooling rate. Relatively long K2Ti4O9 fibers ( 1.2mm) have been grown with quite a high aspect ratio (c/a 500)when the starting material with a nominal composition of K2O and TiO2 with 1:4 was calcined at 115$0^{\circ}C$ for 4h, and then was slowly cooled to 95$0^{\circ}C$ with a rate of 2$0^{\circ}C$/h. In case of a K2O.6TiO2 composition, acicular shaped K2Ti6O13 fibers with 20~300${\mu}{\textrm}{m}$ long and low aspect ratio (c/a 10~15) have been formed irrespective of the coolign rate. The growth condition of fibers have been discussed based upon the phase diagram of K2O-TiOa2.

• 한국세라믹학회지
• /
• 제24권5호
• /
• pp.461-469
• /
• 1987

Single crystals of Mn-Zn Ferrite were grown by slow cooling method using Na2B4O7 as flux agent. The effects of flux content and cooling rate on the types of crystals, and the relation between supersaturation and growth mechanism were studied. As a result, the types of grown crystals occurred as plate, hopper and octahedral crystals. The occurrence of these crystal types was dependent on flux content. The habit was found to correlate with the growth rate and supersaturation. The lateral growth of a dendritic crystal is related to the twin layer. The growth of crystals from borax melts mainly occurred by the layer-spreading growth following corner and edge nucleation caused by high supersaturation in the melt. Especially, the plate crystals were produced on top of the melts. The hopper and octahedral crystals occurred at lower supersaturation than the plate crystals.

• 미생물학회지
• /
• 제29권4호
• /
• pp.263-266
• /
• 1991

The growth of T. novellus in auto trophic and geterotrophic media was studied to determine the time required for cells to enter stationary phase and relative percentage of ribosomal proteins. When T. novellus was grown autotrophically, growth proceeded at a slow rate characteristic of autotrophs and did not enter log phase until the end of the first day. Logarithmic growth proceeded for 3-4 days at which time the cells entered the stationary phase. In particular, logarithmic growth was accompanied by decreasing pH of culture media and in the stationary phase the pH levelled off at 6.0, a decrease of 1.6 pH value compared to original pH of media. The pH decrease was greatest during log phase when cells oxidized thiosulfate to $H_{2}$$SO_{4}$. The doubling time was about 26h. In heterotrophic media growth proceeded at a much faster rate and cells entered stationary phase 20-22h after inoculation. The doubling time was 3h. The protein content of the ribosomes in T. novellus grown heterotrophically was 4.2% greater than those from the organism grown autotrophically.

• 오토저널
• /
• 제5권1호
• /
• pp.32-44
• /
• 1983

In case of $K_{Imax}$ < $K_{Iscc}$, the corrosion fatigue of high strength steel in 0.1N $H_{2}$S $O_{4}$ solution and 3.5% salt water is as follows. 1. The fatigue life shortens in order of 3.5% salt water and 0.1N $H_{2}$S $o_{4}$ solution. 2. The fatigue crack growth rate in air is obtained as the following equation. (dc/dN)$_{atr}$=7.23*10$^{-6}$ (.DELTA. K)$^{2.23}$ 3. The corrosion fatigue crack growth rate in environment is divided into three regions, that is, First Region, Second Region and Third Region from the small cyclic stress intensity. 4. The formation rate of the active surface on metal is slower than the mechano-chemical reaction rate in First Region. The crack growth rate depends on time and the cyclic stress intensity and is expressed as the following equation. (dc/dN)$_{I}$=C(/DELTA. K)$^{\delta}$ 5. The formation rate of the active surface is faster than the mechano-chemical reaction rate in Second Region and the synergistic effect by stress and corrosion becomes slow. In case the fatigue load is large, we have the critical crack growth rate which is not related to the cyclic stress intensity. 6. The corrosion crack growth rate by the mechano-chemical reaction is the same in $H_{2}$S $O_{4}$ solution and salt water, so Hydrogen accelerates the crack growth. 7. The environment has no effect on the corrosion fatigue crack growth rate in Third Region. 8. In First Region and Second Region, dimple is observed on the fatigue fracture surface in 0.1N $H_{2}$S $O_{4}$ solution. 9. The striation is observed in any environment as in air in Third Region and its interval approximately coincide with the crack growth rate.ate.e.e.

• 한국환경농학회지
• /
• 제20권4호
• /
• pp.218-224
• /
• 2001

본 시험은 벼의 전 생육기간에 필요한 질소를 완효성 비료로서 육묘상자에 시용하거나 전량기비로 전층시비할 때 모의 장해나 수량감소 없이 질소이용률을 높이고, 시비노동력을 줄일 수 있는 완효성 비료의 종류와 알맞은 시비량을 찾고자 수행하였다. 완효성 질소비료는 MS 10, MS S10, LCU 80, LCU 100 이었으며, 시용량은 0, 6, 9, 12 kg N/10 a 이었다. 수중 질소용출율과 전기전도도는 MS 10 > LCU 80 ${\fallingdotseq}$ LCU 100 > MS S10 순으로 컸으며, 온도가 높을수록 질소의 용출율이 높았고, EC가 증가하였다. MS 10 시용구에서는 어느 시비량에서나 출아하지 않았고, LCU 80과 LCU 100 처리구에서는 시비량이 증가할수록 입모율이 현저히 저하되었으며, 파종 후 13일에 모가 심하게 시들었다. 모든 MS S10 처리구에서는 입모율이 80% 이상이었고, 파종 후 30일까지 모가 정상적으로 생장하였다. MS S10을 육묘상자와 본답에 전량기비로 시용하였을 때 벼 수량은 두 시비방법간에 차이가 없었으며, 시비량간에는 6, 9, 12 kg N/10a과 요소로서 12 kg N/10a을 4회 분시한 관행시비방법 간에 차이가 없었다. MS S10의 질소이용률은 질소시비량이 증가할수록 감소하였으며, MS S10 시용구가 관행의 요소시비구보다 높았다.

• 생물환경조절학회지
• /
• 제14권3호
• /
• pp.212-217
• /
• 2005

고품질 분화생산을 위한 저면관수 시스템인 C-형강 매트재배 시 수용성 비료와 완효성 비료의 농도에 따른 카네이션의 생육을 연구하기 위하여 본 실험을 수행하였다. 수용성 비료를 $0.8{\~}1.0\;g{\cdot}L^{-1}$ 처리한 T08 처리구에서 생체중, 건물중, 엽수, 엽면적, 초장, 분지수의 생육량에서 가장 양호하였다. 생체중, 건물중, 및 초장의 증가에 있어서 증가량에서의 차이는 있었지만 생육 60일을 전후로 비료의 종류에 관계없이 증가량이 늘어났다. 특히 총 엽면적은 경우 생육 90일을 전후로 증가가 완만해지는 경향을 나타내었다. 이 결과를 통하여 C-형강 매트 재배시스템에서 분화용 카네이션을 재배할 경우 수용성 비료를 공급하는 것이 완효성 비료를 공급하는 것보다 효과적인 것으로 나타났고, 수용성 비료의 농도는 $0.8{\~}1.0\;g{\cdot}L^{-1}$이 카네이션의 재배에 적정한 농도로 판명 되었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2005년도 제29회 학술발표회 초록집
• /
• pp.110-110
• /
• 2005

• 한국세라믹학회지
• /
• 제26권4호
• /
• pp.459-470
• /
• 1989

Single crystals of rare-earth iron garnets were grown from solutions of molten lead oxide, lead fluoride, baric oxide, iron oxide, and the oxides of yttrium, samarium orgadolinium. The crystals were grown by slow cooling technique. A convenient composition was 41.8mol% PbO, 20.59mol% PbF2, 8.23mol% B2O3, 20.00mol% Fe2O3 and 10.00mol% R2O3 where R is Y, Sm or Gd. For this experiment, platinum crucibles of size 20, 30cc and a vertical siliconit tube furnace were used. The precipitation temperature of YIG was observed in the range of 115$0^{\circ}C$-112$0^{\circ}C$ and the optimum growth conditions in this experiment were determined. The nucleation rate was controlled by the holding time after the fast colling, the growth rate by the slow cooling conditiions. The form of the grown YIG crystals showed a combination of {110} and {211}, and the size of the crystals grown in this experiment was up to about 9mm under the conditions of holding time 16hour, cooling rate 2$^{\circ}C$/hr. and temperature range 115$0^{\circ}C$-90$0^{\circ}C$. The precipitatin temperature of SmIG was observed in the range of 105$0^{\circ}C$-98$0^{\circ}C$ and the size of the crystals grown in this experiment was up to about 5mm under the conditiions of holding time 16hours, cooling rate 2$^{\circ}C$/hr. and temperature range 100$0^{\circ}C$-80$0^{\circ}C$.

• Asian-Australasian Journal of Animal Sciences
• /
• 제3권3호
• /
• pp.183-186
• /
• 1990

Monensin administered as a slow release capsule to Droughtmaster steers grazing mixed pastures containing Stylosanthes hamata or grass pastures fertilized with N, had no effect on growth rate over 111 day period. Monensin significantly increased the level of propionic acid (p<0.001) and decreased the level of butyric acid (p<0.01) in the rumen. The lack of response to monesin was partly attributed to the poor pasture conditions and growth rate of the steers during part of the experimental period. An implant of oestradiol improved growth rates during the period of poor forage quality and in the subsequent 56 days when pastures were of high quality following rain. Mean growth rates over the entire 157 days for control, monensin and monensin/oestradiol treatments were 0.37, 0.37 and 0.50 kg/d respectively. It was concluded that when pasture conditions are sufficient only for the maintenance of liveweight, production can be improved by an oestradiol implant but not by feeding an ionophore such as monensin.