• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.8 s.350
• /
• pp.35-46
• /
• 2006

When an RFID reader attempts to read the tags, interference might occur if the neighboring readers also attempt to communicate with the same tag at the same time or the neighboring readers use the same frequency simultaneously. These interferences cause the RFID reader collision. When the RFID reader collision occurs, either the command from the reader cannot be transmitted to the tags or the response of the tags cannot receive to the reader correctly, Therefore, the international standard for RFID and some papers proposed the methods to reduce the reader collision. Among those, Colorwave and Enhanced Colorwave is the reader anti-collision algorithm using the frame slotted ALOHA based a TDM(Time Division Multiplex) and are able to reduce the reader collision because theses change the frame size according to a collision probability. However, these can generate the reader collisions or interrupt the tag reading of other readers because the reader that collides with another reader randomly chooses a new slot in the frame. In this paper, we propose a new RFID reader anti-collision algorithm that each reader monitors the slots in the frame and chooses the slot having the minimum occupation probability when the reader collision occurs. Then we analyze the performance of the proposed algorithm using simulation tool.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.11
• /
• pp.1025-1033
• /
• 2011

In this paper, we introduce the contactless power transmission device for transmitting the power with the resonant characteristic of the cavity resonator. When transmitting the power, the contactless power transmission device begins to work in the condition where the transceiver adheres closely. The transceiver is electrically separated because there is no conductive terminal outside and the size of the receiver required for the electric power transmission can be minimized. The cavity resonator comprises slots for the input port and output port in the upper side conductor plate of the cavity and forms the input port and output port using the stripline structure at this upper part. The some of output port is separated from it and the electric power receiver is formed thus the union can be possible. The rest except electric power receiver become the electric power transmitter, which includes the input port of stripline-slot coupling, cavity, and the slot of the output port. If the transmitter and the receiver are combined, they become the form in which the electricity is transferred from the input port to the output port in a cavity resonator. The center frequency of the contactless power transmitter manufactured is 5.782 GHz. and $S_{21}$ is measured as -1.07 dB. It is confirmed that the high electric power transfer rate is approximately 78 %.

• The Journal of the Korea Contents Association
• /
• v.12 no.12
• /
• pp.71-79
• /
• 2012

In Japan, the number of late night animations has increased from the 2000s. In 2010, it exceeded the number of other Japanese animations playing between 6:00 to 23:00 (pre-late night). People watching these late night animations were mostly adolescents or older. Late night animations involve various niche themes, however, the ranges of the main characters' actions of these stories were narrower and more limited compared to the pre-late night animations. The causes for these differences in the scales of the settings were found by comparing the late night and pre-late night animations. The most popular animations from these two time slots were used in the analysis. Firstly, the main characters' ways of approaching their goals were analyzed. Secondly, the settings and directions that the main characters used were analyzed. Lastly, the main characters' degree of interactions with other people was analyzed. As a result of the analysis, the main characters' goals from the late night animations were often found to be commonplace and they tended to achieve their goals by very realistic means. In addition to that, the stories of these main characters revolved around small and familiar communities. Thus, their connections with people were comparatively smaller than those of pre-late night animations and were based upon shared interests. In other words, the differences in the scales of the settings between the two types of animations resulted from the stories of the late night animations revolving mainly around reality, communities, and relationships within the communities.

• The Journal of Sustainable Design and Educational Environment Research
• /
• v.6 no.2
• /
• pp.66-90
• /
• 2007

The purpose of this study is to measure and analyze primary causes of indoor air pollution, including carbon dioxide, minute dust, and total volatile organic compounds, for each room before the beginning of a class through the time of discharge after the end of the class in general classrooms, computer rooms, and science rooms of three newly-established schools that opened in 2006, examine properties of indoor air environment in each room by educational activities at school, and determine effective management schemes; the results of this study can be summarized as follows: 1) As for implications for each item found in the mean for each place, since minute dust (PM10) was more likely to occur in time slots full of students' activities, such as a traveling class and a recess, than in the middle of a class and could be expected fully, it is necessary to make a scheme for cleaning in order to reduce minute dust within a room, for example, by usually using a vacuum cleaner indoors. 2) While carbon dioxide was expected to vary with the differences in the amount of breath between higher-graders and lower-graders in a general classroom but showed insignificant difference by grades, showing differences in pollution by four times at a maximum according to the opening of a window as expected, it is necessary to implement artificial or natural ventilation and take a positive measure, for example, by presenting a concrete ventilation scheme, in order to improve indoor air pollution at a room practice. 3) Total volatile organic compounds were found to exceed the standard by more than twice in general classrooms, science rooms, and computer rooms of the schools because of building materials, furnitures including desks and chairs, panels and boards for environment beautification, and items which could be detected even from students' clothes; while a field directly-reading tool was used, obtaining high reliability for the results, it is necessary to apply an analytical method based on process test separately for actual correct measurement if a significantly great amount of total volatile organic compounds appear as compared with other schools due to measuring expenses and consecutive measurements. 4) Since formaldehyde (HCHO) was generally found to exceed the standard in general classrooms, science rooms, and computer rooms, it is necessary to establish and operate a ventilator during a class in a computer room which requires airtightness and a science room in which an organic compound should be used for a class.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.12
• /
• pp.1-9
• /
• 2001

In the APON(ATM Passive Optical Network), the transmission of the upstream traffic is based on a TDMA(Time Division Multiple Access) method that an OLT(Optical Line Termination) permits ONUs(Optical Network Units) sending cells by allocating time slots. Because the upstream is not a streaming mode, the cell synchronizer has to be operated in the burst mode. Also, the cell phase monitor is required to prevent collisions between cells which are transmitted by multiple ONUs through a single optical fiber. In this paper, a TDMA burst cell synchroniser is implemented with the FPGA(Field Programmable Gate Array) being used in the APON based on G.983.1 for transmitting upstream cells. It has two main functions which are the upstream data recovery and the phase monitoring. The former is to recover the upstream data and clock in the OLT by seeking the preamble which is the overhead of the upstream time slot and by aligning the phase of the bit and cell with the system clock. The latter is to provide the information to the ONU to compensate for the equalization delay by monitoring continuously the phase difference between adjacent cells to avoid the cell collision on the upstream.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.5
• /
• pp.555-564
• /
• 2016

This paper proposes a time slot allocation scheme for military patrol environments. This proposal comes from analysis of traffic properties in a military patrol environment. In the near future, robots are expected to explore enemy grounds and measure threat, taking the place of human patrol. In order to control such robots, control messages must be extremely accurate. One mistake from the control center could cause a tragedy. Thus, high reliability must be guaranteed. Another goal is to maintain a continual flow of multimedia data sent from patrol robots. That is, QoS (Quality of Service) must be guaranteed. In order to transmit data while fulfilling both attributes, the per-path based centralized TDMA slot allocation scheme is recommended. The control center allocates slots to robots allowing synchronization among robots. Slot allocation collisions can also be avoided. The proposed scheme was verified through the ns-3 simulator. The scheme showed a higher packet delivery ratio than the algorithm in comparison. It also performed with shorter delay time in the downlink traffic transmission scenario than the algorithm in comparison.

• Journal of Information Management
• /
• v.25 no.1
• /
• pp.24-46
• /
• 1994

In this paper I will discuss definitions of hypermedia, multimedia and hypertext. Hypertext is the grouping of relevant information in the form of nodes. These nodes are then connected together through links. In the case of hypertext the nodes contain text or graphics. Multimedia is the combining of different media types for example sound, animation, text, graphics and video for the presentation of information by making use of computers. Hypermedia can be viewed as an extension of hypertext and multimedia. It is based on the concept of hypertext that uses nodes and links in the structuring of information in the system. In this case the nodes consist of an the different data types that are mentioned in the multimedia definition above. The 'node-and-link' concept is used in organisation of the information in hypermedia systems. The 'book' metaphor is an example of the way these systems are implemented. This concept is explained and a few advantages and disadvantages of making use of hypermedia systems are discussed. A new approach for the development of hypermedia systems, namely the knowledge-based approach is now looked into. Joel Peing-Ling Loo proposed this approach because he thought that it is the most effective way for handling this kind of technology. A semantic-based hypermedia model is developed in this approach to formulate solutions for the restrictions in presenting information authoring, maintenance and retrieval. The knowledge-based presentation of information includes the use of conventional data structures. These data structures make use of frames(objects), slots and the inheritance theory that is also used in expert systems. Relations develop between the different objects as these objects are included in the database. Relations can also exist between frames by means of attributes that belong to the frames.

• Journal of Broadcast Engineering
• /
• v.15 no.2
• /
• pp.224-231
• /
• 2010

In this paper, we analyze the performance of the cooperative relay communication system which uses orthogonal frequency division multiplexing(OFDM) with hierarchical subcarrier modulation. In the cooperative relay communication system, data transmission is accomplished in two time slots. In the first time slot, the source broadcasts the signal to the relay and to the destination. The relay demodulates the received signal, remodulates and forwards it to the destination in the second time slot. The source uses hierarchical modulation for subcarriers to deal with the signal-to-noise power ratio (SNR) difference in the source-relay and source-destination links. The bit error rate (BER) of the relay transmission system with hierarchical modulation depends on the hierarchical modulation parameter. First, we derive the relationship between BER and the parameter, and find the optimal parameter giving the minimum BER through computer simulations. Then, we analyze the performance of the proposed cooperative relay communication system according to the relay location. From this results, we find optimal relay location to maximize the BER performance.

• Journal of KIISE:Information Networking
• /
• v.33 no.4
• /
• pp.333-342
• /
• 2006

The cdma2000 lxEV - DO mobile communication system provides broadcast and multicast services (BCMCS) to meet an increasing demand from multimedia data services. The servicing of video streams over a BCMCS network must, however, face a challenge from the unreliable and error-prone nature of the radio channel. The BCMCS network uses Reed-Solomon coding integrated with the MAC protocol for error recovery. We analyze this coding technique and show that it is not effective in the case of slowly moving mobiles. To improve the playback quality of an MPEG-4 FGS video stream, we propose the Hybrid error recovery scheme, which combines Reed-Solomon with ARQ, using slots which are saved by reducing the Reed-Solomon coding overhead. The target packets to be retransmitted are prioritized by a utility function to reduce the packet error rate in the application layer within a fixed retransmission budget. This is achieved by considering of the map of the error control block at each mobile node. The proposed Hybrid error recovery scheme also uses the characteristics of MPEG-4 FGS (fine granularity scalability) to improve the video quality even when conditions are adverse: slow-moving nodes and a high error rate in the physical channel.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.1A
• /
• pp.96-103
• /
• 2000

The voice traffic is one of the most important real-time objects in WATM(Wireless Asynchronous Transfer Mode) networks. In this paper, we propose a new MAC(Medium Access'Control) protocol for the efficienttransmission of voice traffic over WATM networks in the multimedia environment and compare the performanceto existing similar protocols. The new protocol separates the reservation slot period for voice and that for data toguarantee some level of QoS(Quality of Service) in voice traffic. This is denoted by a slot assignment functiondepending on the frame size. According to the characteristics of voice traffic which is repeatedly in silent states,the protocol allocates voice reservation request slots dynamically with respect to the number of silent(off state)voice sources and also sends the first block of talkspurt restarted after silent period with a reservation requestslot to reduce the access delay.The simulation results show that the proposed protocol has better performance than Slotted Aloha in bandwidthefficiency, and can serve a certain level of QoS by the given slot assignment function even when the number ofvoice terminals varies dynamically. This means we can observe that the new MAC protocol is much better thanthe NC-PRMA(None Collision-Packet Reservation Multiple Access) protocol.