• 화약ㆍ발파
• /
• 제28권2호
• /
• pp.50-58
• /
• 2010

본 연구는 아직 국내에서 연구가 미비한 분야인 슬롯드릴링 공법에 대해 분석한 것이며 슬롯드릴링 공법을 공사현장에서 적용할 수 있는 이론적인 기반을 마련하고자 하였다. 본 연구는 슬롯드릴링 공법을 통해 진동저감의 가능성을 제안한다. 수치해석을 통해 슬롯드릴링의 유효제원 관해 크게 두 가지를 분석 하였다. 하나는 슬롯과 진원 사이의 거리에 따른 진동속도의 변화를 분석이며 다른 하나는 진동제어를 위한 적절한 크기의 슬롯너비와 슬롯높이를 찾고자 하였다. 결론적으로 진원과 슬롯사이의 거리가 멀어질수록 진동저감 효과가 감소함을 알 수 있었다. 그리고 슬롯제원의 변화에 따른 임의의 계측지점에서의 진동속도에 대한 영향도 확인할 수 있었다.

• 화약ㆍ발파
• /
• 제14권3호
• /
• pp.57-65
• /
• 1996

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 봄 학술발표회 논문집
• /
• pp.399-406
• /
• 1999

Recently, the construction of the several highway bridges in the karst area have encountered severe problems associated with cavities and sinkholes. To solve this problems, it is important to understand the distribution characteristics of cavities in the construction site on limestone area. This paper briefly describes the different types, the distribution control factors and the infill sediment types of lime-cavities in the study area, bridge site in the karst area and propose the effective method of survey design. Cavity system may be divided into two main groups, 1)'slot and cave system'and 2)'sinkhole and cave system'. And the shape, the size and the distribution pattern of cavity are controlled by three main factors - rock type, geological structure and ground water condition. Additionally, infill sediment may be considered as one of the important design factors for foundation design and divided into four types by sediment properties. There are geophysical thechnics and geologic survey and drilling test, etc. by the survey method to interpretate characteristics of cavity system, and this methods are optimally designed at the site investigation stage.

• 한국정밀공학회지
• /
• 제21권4호
• /
• pp.32-38
• /
• 2004

Laser-induced thermochemical wet etching of titanium in phosphoric acid has been investigated to examine the feasibility of this method fur fabrication of microstructures. Cutting, drilling, and milling of titanium foil were carried out while examining the influence of process parameters on etch width, etch depth, and edge straightness. Laser power, scanning speed of workpiece, and etchant concentration were chosen as major process parameters influencing on temperature distribution and reaction rate. Etch width increased almost linearly with laser power showing little dependence on scanning speed while etch depth showed wide variation with both laser power and scanning speed. A well-defined etch profile with good surface quality was obtained at high concentration condition. Fabrication of a hole, micro cantilever beam, and rectangular slot with dimension of tess than 100${\mu}{\textrm}{m}$ has been demonstrated.