• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.2
• /
• pp.323-335
• /
• 2015

Mobile healthcare is a fusion of information technology and biotechnology and is a new type of health management service to keep people's health at anytime and anywhere without regard to time and space. The WBAN(Wireless Body Area Network) technology that collects bio signals and the data analysis and monitoring technology using mobile devices are essential for serving mobile healthcare. WBAN consisting of users with mobile devices meet another WBAN during movement, WBANs transmit data to the other media. Because of WBAN conflict, several nodes transmit data in same time slot so a collision will occur, resulting in the data transmission being failed and need more energy for re-transmission. In this thesis, we proposed a MAC protocol for WBAN with mobility to solve these problems. First, we proposed a superframe structure for WBAN. The proposed superframe consists of a TDMA(Time Division Muliple Access) based contention access phase with which a node can transmit data in its own time slot and a contention phase using CSMA/CA algorithm. Second, we proposed a network merging algorithm for conflicting WBAN based on the proposed MAC protocol. When a WBAN with mobility conflicts with other WBAN, data frame collision is reduced through network reestablishment. Simulations are performed using a Castalia based on the OMNeT++ network simulation framework to estimate the performance of the proposed superframe and algorithms. We estimated the performance of WBAN based on the proposed MAC protocol by comparing the performance of the WBAN based on IEEE 802.15.6. Performance evaluation results show that the packet transmission success rate and energy efficiency are improved by reducing the probability of collision using the proposed MAC protocol.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.15 no.2
• /
• pp.23-36
• /
• 2005

The main obstacle hindering the wide deployment of identity-based cryptosystem is that the entity responsible for creating the private key has too much power. As a result, private keys are no longer private. One obvious solution to this problem is to apply the threshold technique. However, this increases the authentication computation, and communication cost during the key issuing phase. In this paper, we propose a new effi ient model for issuing multiple private keys in identity-based encryption schemes based on the Weil pairing that also alleviates the key escrow problem. In our system, the private key of a user is divided into two components, KGK (Key Description Key) and KUD(Key Usage Desscriptor), which are issued separately by different parties. The KGK is issued in a threshold manner by KIC (Key Issuing Center), whereas the KW is issued by a single authority called KUM (Key Usage Manager). Changing KW results in a different private key. As a result, a user can efficiently obtain a new private key by interacting with KUM. We can also adapt Gentry's time-slot based private key revocation approach to our scheme more efficiently than others. We also show the security of the system and its efficiency by analyzing the existing systems.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.37 no.1
• /
• pp.36-42
• /
• 2024

Roll-to-roll processing holds an integral position within the manufacturing landscape, and its significance reverberates across numerous industries. This versatile technology platform encompasses a diverse array of process methods and accommodates a wide spectrum of material categories, making it a cornerstone of modern production. Within this expansive domain, two commonly employed coating techniques, namely the slot die and gravure coating methods, have earned their prominence for their precision and efficiency in delivering flawless coatings. Additionally, the realm of drying processes relies heavily on thermal drying, infrared (IR) drying, and ultraviolet (UV) drying methods to expedite the transformation of materials from their liquid or semi-liquid states to solid, ready-to-use products. The undeniable importance of roll-to-roll processing lies in its ability to streamline manufacturing processes, reduce costs, and enhance product quality. This article embarks on a comprehensive journey to fathom the depth of this importance by delving into the intricacies of these common roll-to-roll process methods. Through rigorous research and meticulous data collection, we aim to shed light on the pivotal role these techniques play in shaping various industries and advancing the world of manufacturing. By understanding their significance, we can harness the full potential of roll-to-roll processing and pave the way for innovation and excellence in production.

• Applied Chemistry for Engineering
• /
• v.5 no.5
• /
• pp.836-842
• /
• 1994

The optimum design conditions of gas sparger pipe and the effects of operating variables on $SO_2$ removal efficiency have been examined in Jet Bubbling Reactor. Geometry of gas sparser pipe of Jet Bubbling Reactor is a very important factor to obtain a effective gas-liquid contact. Test results revealed that Reynolds numbers at sparger and slot have to be kept greater than 12,000 identically at a given gas velocity. $SO_2$ removal efficiency was a function of ${\Delta}P$, pH, inlet $SO_2$ concentration and particle size of limestone and was more sensitive to the change of ${\Delta}P$ than to the changes of others. The ${\Delta}P$ of at least 230mmAq must be maintained to acheive the above 90% $SO_2$ removal at pH of 4.0 which is considered as adequate operating pH. Higher $SO_2$ removal efficiency was obtained even at lower pH ranges, which resulted from the complete oxidation of the absorbed $SO_2$ to sulfates by adding air and consequently from the reduction of $SO_2$ equillibrium partial pressure in the gas-liquid interface The 99.5% of the limestone utilization was attained in pH range from 3.0 to 5.0 with regardless to the particle size of limestone employed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.11
• /
• pp.1138-1147
• /
• 2012

In this paper, an efficient power control based MF-TDMA resource allocation scheme is proposed for next generation military satellite communication systems. The proposed scheme has the flexibility is used to support heterogeneous terminals with differ in transmission capabilities. The method can be divided into two parts : burst size calculation and burst structure determination. At first, we estimate the link budget taken into account a dynamic satellite link state variation. Then, applicable ACM level and burst size is chosen. In burst structure determination phase, we reorganize the burst structure in time-frequency domain by controlling limited power, bandwidth, time resources. In particular, we compensate the power spectral density among different terminals to integrate them in same transponder, Furthermore, we increase the packing efficiency by controlling the ACM level of the burst in applicable power spectral density range. Simulation results show that the method increase the spectral efficiency and burst packing efficiency. In addition, slot allocation rejection ratio is successfully reduced.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.4
• /
• pp.357-365
• /
• 2009

A general analysis of a microstrip-to-vertically mounted slotline(VMS) coupler is presented with a view to developing an equivalent circuit, and the efficient evaluation of the related circuit element values. Based on this theory, the effects of frequency and structure parameters such as aperture length and VMS width on the characteristics of the coupler are studied. In order to check the validity of the proposed analysis and design theory, a C-band linearly tapered slot antenna fed by an aperture-coupled back-to-back microstripline-to- VMS coupling structure is optimally designed using a hybrid genetic algorithm. Moreover, the computed characteristics from the network analysis is compared to the measurement and simulation results. The obtained results fully validate the efficiency and accuracy of the proposed network model.

• Journal of KIISE:Computing Practices and Letters
• /
• v.15 no.7
• /
• pp.478-488
• /
• 2009

Using solar power in wireless sensor networks (WSNs) requires adaptation to a highly varying energy supply and to a battery constraint. From an application's perspective, however, it is often preferred to operate at a constant quality level as opposed to changing application behavior frequently. Reconciling the varying supply with the fixed demand requires good tools for allocating energy such that average of energy supply is computed and demand is fixed accordingly. In this paper, we propose a probabilistic observation-based model for harvested solar energy. Based on this model, we develop a time-slot-based energy allocation scheme to use the periodically harvested solar energy optimally, while minimizing the variance in energy allocation. We also implement the testbed and demonstrate the efficiency of the approach by using it.

• The Journal of the Korea Contents Association
• /
• v.8 no.7
• /
• pp.58-65
• /
• 2008

The overlay multicast that has been recently presented as an alternative for the IP multicast has been getting much attention by the advancement of network techniques to enforce routing in application-levels. In this paper, we verified the efficiency of Internet broadcasting through comparing latency time of TBCP with mOBCP that have distributed Tree-first based spanning-tree structures in overlay multicast techniques. We also propose effective tree structures that minimize latency time and provide competent service by choosing optimum parent nodes early in the base of these two methods over the same time slot in multi-user connection. The results of our comparison showed that average latency time in mOBCP techniques declined by 36% from those of TBCP technique.

• Journal of Microbiology and Biotechnology
• /
• v.16 no.1
• /
• pp.149-152
• /
• 2006

Leuconostoc mesenteroides SY1, a strain isolated from cabbage Kimchi, was transformed with pCW4, a shuttle vector based on a cryptic plasmid from Lactobacillus paraplantarum C7. $\alpha-Amylase$ gene, amyL, from Bacillus licheniformis was cloned into pCW4, resulting in $pCW4T{\alpha},\;and\;pCW4T{\alpha}$ was introduced into SY1 by electroporation. Transformation efficiency was $10^2cells/{\mu}g$ plasmid DNA. L. mesenteroides cells harboring $pCW4T{\alpha}$ did not show amylase activity, although amyL transcript was synthesized as determined by slot blot experiment. $pCW4T{\alpha}$ was stably maintained in SY1 in the presence of erythromycin (Em, $5\;{\mu}g/ml$) but rapidly lost when Em was omitted. Less than $1\%$ of the cells maintained $pCW4T{\alpha}$ after 5 days at $30^{\circ}C$.

• Journal of Advanced Navigation Technology
• /
• v.15 no.1
• /
• pp.54-60
• /
• 2011

The development of wireless sensor networks (WSN) can be motivated by several types of applications. However, these applications demand an energy-efficient WSN that can prolong the network lifetime and can provide high throughput, low latency and delay. Designing wireless sensor networks with the capability of prolonging network lifetime catch the attention of many researchers in wireless system and network field. Contrasts with Mobile Ad Hoc Network system, Wireless Sensor Networks designs focused more on survivability of each node in the network instead of maximizing data throughput or minimizing end-to-end delay. In this paper, we will study part of data link layer in Open Systems Interconnection (OSI) model, called medium access control (MAC) layer. Since the MAC development of energy aware MAC Protocol for wireless sensor layer controls the physical radio part, it has a large impact on the overall energy consumption and the lifetime of a node. This paper proposes a analytical approach that tries to reduce idle energy consumption, and shows the increasement of network end-to-end arrival rate due to efficiency in energy consumption from time slot management.