• 제목/요약/키워드: Slot Radiation

검색결과 242건 처리시간 0.028초

ISM대역용 마이크로스트립 패치 배열 안테나 설계 (Design of Microstrip Patch Array Antenna for ISM Band)

  • 이현진;임영석
    • 대한전자공학회논문지TC
    • /
    • 제41권8호
    • /
    • pp.119-124
    • /
    • 2004
  • 본 논문에서는 무선LAN 및 ISM용을 위한 5[GHz]대역 원편파 마이크로스트립 배열안테나를 설계 제작하였다. 원편파를 위한 기존의 십자형 슬롯 안테나 구조를 수정하여 두 개의 슬롯이 직각으로 교차하는 부분을 없애고 분리된 4개의 슬롯으로 구성된 안테나 구조를 제안하였다. 기존의 구조에서 급전선로와 슬롯간의 비대칭으로 전자기적 결합의 약화와 슬롯의 비대칭으로 발생되는 기생요소의 증가로 안테나 효율이 약화되는 문제가 있는 반면, 제안된 구조의 안테나는 대역폭 증가와 후방 방사의 감소를 확인하였다. 제안된 안테나는 공진 주파수가 5[GHz]대역의 2${\times}$2 마이크로스트립 배열안테나를 제작하여 최대 12.5[dBi]의 이득과 280[MHz]의 대역폭(VSWR < 1.5)를 얻었다.

Quadruple Band-Notched Trapezoid UWB Antenna with Reduced Gains in Notch Bands

  • Jin, Yunnan;Tak, Jinpil;Choi, Jaehoon
    • Journal of electromagnetic engineering and science
    • /
    • 제16권1호
    • /
    • pp.35-43
    • /
    • 2016
  • A compact ultra-wide band antenna with a quadruple band-notched characteristic is proposed. The proposed antenna consists of a slotted trapezoid patch radiator, an inverted U-shaped band stop filter, a pair of C-shaped band stop filters, and a rectangular ground plane. To realize the quadruple notch-band characteristic, a U-shaped slot, a complementary split ring resonator, an inverted U-shaped band stop filter, and two C-shaped band stop filters are utilized in this antenna. The antenna satisfies the -10 dB reflection coefficient bandwidth requirement in the frequency band of 2.88-12.67 GHz, with a band-rejection characteristic in the WiMAX (3.43-3.85 GHz), WLAN (5.26-6.01 GHz), X-band satellite communication (7.05-7.68 GHz), and ITU 8 GHz (8.08-8.87 GHz) signal bands. In addition, the proposed antenna has a compact volume of $30mm{\times}33.5mm{\times}0.8mm$ while maintaining omnidirectional patterns in the H-plane. The experimental and simulated results of the proposed antenna are shown to be in good agreement.

1 kW급 LNG 스털링 엔진 연소실 수치해석 (CFD STUDY ON THE COMBUSTION CHAMBER OF A 1 kW CLASS STIRLING ENGINE)

  • 안준;이윤식;김혁주
    • 한국전산유체공학회지
    • /
    • 제16권3호
    • /
    • pp.88-94
    • /
    • 2011
  • The availability of the thermal energy has been deeply recognized recently to encourage the cascade usage of thermal energy from combustion. Within the framework, a 1 kW class Stirling engine based cogeneration system has been proposed for a unit of a distributed energy system. The capacity has been designed to be adequate for the domestic usage, which requires high compactness as well as low emission and noise. To develop a highly efficient system with satisfying these requirements, a premixed slot type short flame burner has been proposed and a series of numerical simulation has been performed to establish a design tool for the combustion chamber. The thermal radiation model has been found to highly affect the computational results and a proper resolution to analyze the heat transfer characteristics of the high temperature heat exchanger. Finally, the combustion characteristics of the premixed flame with the metal fiber type burner has been studied.

A Novel Monopole Antenna with Two Arc-Shaped Strips for WLAN/WiMAX Application

  • Yoon, Joong Han;Ha, Sung Jae;Rhee, Young Chul
    • Journal of electromagnetic engineering and science
    • /
    • 제15권1호
    • /
    • pp.6-13
    • /
    • 2015
  • In this paper, a novel monopole antenna for WLAN/WiMAX application is presented. The proposed antenna consists of two arc-shaped strips, a vertical strip, and a slot in the ground plane. In this study, a prototype of the proposed triple-band antenna was designed, fabricated, and tested. The quantitative and experimental results demonstrate that the proposed antenna satisfy the -10 dB impedance bandwidth requirement of 440 MHz for 2.4/2.5 GHz bands (from 2.26 to 2.70 GHz), 970 MHz for 3.5 GHz bands (from 3.27 to 4.24 GHz), and 870 MHz for the GHz bands (from 5.08 to 5.95 GHz), while simultaneously covering the WLAN and WiMAX bands. In addition, the presented triple-band antenna has an omnidirectional radiation pattern at all three frequency bands with an antenna gain of 4.45 dBi for the lowest band, 2.04 dBi for the middle band, and 3.98 dBi for the highest band.

전산유체 해석을 통한 슬림형 이중외피 창호의 태양열 취득량 분석 - 높은 태양고도 및 하절기 냉방조건에서의 자연환기구 적용 및 창문 조절 방식별 비교 - (Numerical analysis of solar heat gain on slim-type double-skin window systems - Heat transfer phenomena with opening of windows and vent slot in summer condition -)

  • 박지호;오은주;조동우;조경주;유정연
    • KIEAE Journal
    • /
    • 제17권1호
    • /
    • pp.69-75
    • /
    • 2017
  • Purpose: Heat transfer analysis of recently developed 'slim type double-skin system window' were presented. This window system is designed for curtain wall type façade that main energy loss factor of recent elegant buildings. And the double skin system is the dual window system integrated with inner shading component, enclosed gap space made by two windows when both windows were closed and shading component effectively reflect and terminate solar radiation from outdoor. Usually double-skin system requires much more space than normal window systems but this development has limited by 270mm, facilitated for curtain wall façade buildings. In this study, we estimated thermophysical phenomena of our double-skin curtain wall system window with solar load conditions at the summer season. Method: A fully 3-Dimentional analysis adopted for flow and convective and radiative heat transfer. The commercial CFD package were used to model the surface to surface radiation for opaque solid region of windows' frame, transparent glass, fluid region at inside of double-skin and indoor/outdoor environments. Result: Steep angle of solar incident occur at solar summer conditions. And this steep solar ray cause direct heat absorption from outside of frame surface rather than transmitted through the glass. Moreover, reflection effect of shading unit inside at the double-skin window system was nearly disappeared because of solar incident angle. With this circumstances, double-skin window system effectively cuts the heat transfer from outdoor to indoor due to separation of air space between outdoor and indoor with inner space of double-skin window system.

이중대역 저지특성을 가지는 2.4 GHz WLAN 및 UWB 겸용 모노폴 안테나 (Dual Band-notched Monopole Antenna for 2.4 GHz WLAN and UWB Applications)

  • 이기용;이영순
    • 한국항행학회논문지
    • /
    • 제21권2호
    • /
    • pp.193-199
    • /
    • 2017
  • 본 논문에서는 이중대역 저지 특성을 가지는 2.4 GHz WLAN (2.4 ~ 2.484 GHz) 및 UWB (3.1 ~ 10.6 GHz) 겸용 모노폴 안테나를 제안하였다. 3.5 GHz WiMAX 대역 저지 특성을 얻기 위하여 기존의 방사패치 중앙에 위치한 U-형태 슬롯을 대신하여 방사패치 가장자리에 위치하는 한쌍의 L-형 슬롯이 사용되고, 반면에 7.5 GHz 대역 저지를 위하여 급전선 인근에 배치되는 한 쌍의 C-형태의 스트립 공진기를 사용한다. 제안된 안테나의 제작 및 측정 결과, 임피던스 대역폭 (${\mid}S_{11}{\mid}{\leq}-10dB$) 이 8.62 GHz (2.38 ~ 11 GHz)로 2.4 GHz WLAN 대역을 포함한 UWB 대역을 충분히 만족하고, 반면에 3.5 GHz WiMAX 저지 대역 (${\mid}S_{11}{\mid}$ > -10 dB) 은 1.13GHz (3.15 ~ 4.28 GHz), 7.5 GHz 저지 대역은 800 MHz (7.2~8 GHz) 의 저지 대역폭을 가지는 것을 확인 할 수 있었다. 특히 사용하고자 하는 전 주파수 대역에서 안정되고 우수한 무지향성 방사패턴을 얻을 수 있었으며 2.51~6.81 dBi의 높은 이득 또한 얻을 수 있었다.

두 개의 슬롯을 이용한 단말기용 다중대역 내장형 안테나 (An internal multi-band antenna for mobile handset using two slots)

  • 안상권;최선호;곽경섭
    • 한국ITS학회 논문지
    • /
    • 제13권1호
    • /
    • pp.61-66
    • /
    • 2014
  • 본 논문에서는 LTE 700, GSM 850, GSM 900, GSM 1800, GSM 1900, UMTS 대역에서 동작 가능한 안테나를 설계 제작하였다. 작은 크기의 안테나로 광대역 특성을 얻기 위해 다중대역 모노폴 안테나를 기반으로 커플링 구조를 사용하였고 두 개의 slot을 삽입하여 hexa-band 대역폭 특성을 구현하였다. 시뮬레이션에 의한 최적화된 파라미터를 가지고 제작 하였고 제작된 안테나는 $VSWR{\leq}W3:1$에서 Low 주파수대역 410Hz 대역폭 (0.688-1.098GHz)과 High 주파수대역 643MHz 대역폭 (1.607-2.250GHz)이 측정되어 hexa-band(0.698-0.960GHz, 1.710-2.170GHz) 대역폭을 만족하고 높은 이득 (-0.52-4.68dBi) 및 전방향성 (Omni-directional) 방사 패턴을 얻었다.

표면 전류 분포를 이용한 T자형 UWB 평면형 모노폴 안테나 해석 (Analysis of a T-Shaped UWB Printed Monopole Antenna Using Surface Currents)

  • 이동현;박위상
    • 한국전자파학회논문지
    • /
    • 제16권9호
    • /
    • pp.883-892
    • /
    • 2005
  • 본 논문에서는 T자형의 방사체를 가지는 초광대역 평면형 모노폴 안테나를 제안하고, 방사체와 그라운드 표면에 흐르는 전류 분포를 분석하였다. 측정된 임피던스 대역폭은 VSWR 2 미만 기준으로 3.1${\~}$11 GHz이고, 이는 UWB 대역을 만족한다. 제안된 안테나의 주파수에 따른 표면 전류 분포를 분석하여 제안된 안테나는 두개의 90도 굽은 비대칭적인 다이폴이 대칭으로 놓여 있는 안테나로 동작함을 설명하였다. 이 안테나의 표면 전류 분포가 방사 패턴에 영향을 미치는 양상이 다이폴의 경우와 유사하며, 그라운드 평면의 길이와 너비는 다이폴의 굵기와 길이에 해당한다. 이러한 해석이 다른 일반적인 평면형 모노폴 안테나에도 적용 가능함을 보였다. 끝으로 그라운드 평면의 모서리를 테이퍼링을 하여 공진 주파수를 낮추는 예과 방사체에 역 U자 슬랏을 추가하여 특정 대역을 저지하는 예를 제시하고 이를 표면 전류를 이용하여 설명하였다.

Identifying the plasmapause locations for periods under unusually prolonged and weaker solar conditions

  • Cho, Junghee;Lee, Dae-Young;Shin, Dae-Kyu;Kim, Jin-Hee;Park, Mi-Young;Kim, Thomas Kyoung-Ho
    • 천문학회보
    • /
    • 제38권2호
    • /
    • pp.93.1-93.1
    • /
    • 2013
  • The Earth's radiation belts consist of an inner belt and an outer belt, being separated by the slot region. It is well known that the variations of the inner edge of the outer belt and the location of the plasmapause (Lpp) are closely related to each other. Different waves exist inside and outside the plasmasphere, playing different roles in the particle dynamics. The plasmapause is well known to be influenced by solar wind conditions and geomagnetic disturbances. Therefore, it is important to precisely determine the location of the plasmapause and develop a prediction scheme. In this study, we identified the location of the plasmapause using the plasma density data from the Time History of Events and Macroscale Interactions During Substorms (THEMIS). The plasmapause is determined by requiring density gradient of a factor of 15 within L-change = 0.5. We statistically determined Lpp as a function of preceding geomagnetic indices. Also, we determined the relations between Lpp and preceding solar wind conditions by estimating correlation coefficients. These relations give us predicting models of Lpp as a function of preceding solar wind parameters and geomagnetic indices. As our database covers a period over the ascending phase from near-sunspot minimum, our statistical results differ somewhat from previous works that cover near-sunspot maximum. Finally, we give some comparative examples obtained from the Van Allen Probes data.

  • PDF

PIN 다이오드를 이용한 정삼각형 마이크로스트립 안테나의 동작 주파수 변환 (Switchable Frequency of an Equilateral Triangular Microstrip Antenna with PIN Diodes)

  • 김보연;성영제;김영식
    • 한국전자파학회논문지
    • /
    • 제15권11호
    • /
    • pp.1090-1099
    • /
    • 2004
  • 본 논문에서는 PIN 다이오드의 on/off특성을 이용해 공진 주파수가 변하는 정삼각형 마이크로스트립 안테나를 제안하였다. PIN 다이오드가 off 상태에서는 T 형태 스퍼라인(Spur-line)의 영향으로 스퍼라인 주위로 전류가 돌아서 흐르기 때문에 안테나의 공진 주파수가 1.22 GHz를 보였으나, PIN 다이오드가 on상태일 때는 T형의 스퍼라인이 I 형태 슬롯라인(Slot-line)으로 바뀌고, 이 I 형태의 슬롯라인에 의해 전류가 영향을 덜 받아서 안테나의 공진 주파수가 1.82 GHz를 나타내었고, 이는 일반적인 정삼각형 마이크로스트져 안테나와 공진 주파수와 차이가 거의 없었다. 제안한 안테나는 PIN다이오드가 on, off상태에서 모두 교차 편파가 -20 dB미만의 방사패턴을 가진 선형 편파 특성을 나타내었다.