• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.11
• /
• pp.1223-1232
• /
• 2008

In this paper, an analytic method is proposed to extract the reference slot admittance required for the design of a non-resonant waveguide edge slot array. A slot and two neighboring transmission line sections of the numerous alternately inclined slots with the identical inclination angle are modelled as a uniform lossy transmission line, and thus, the total ABCD matrix is easily calculated and compared with the simulated or measured one. From this procedure, the complex characteristic impedance and the complex propagation constant of the lossy transmission line are calculated and the normalized slot admittance is analytically obtained. In order to validate the proposed method, the admittance value of a reference slotted waveguide fabricated for designing the X-band edge slot array is extracted and it is compared with the one obtained by the other conventional method.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.4 no.3
• /
• pp.9-18
• /
• 1967

Analytic results, valid at resonance, for the admittance properties of an edge shunt slot on the narrow wall of rectangular waveguide have been derived by the use of electromagnetic field equations. Furthermore, additional formulas for the reflection, transmission coefficient and voltage amplitude generated by given incident wave are described. Finally, the measured results are compared with the theoretical values. It was found that the measured results were consistent with the theoretical results. Also the errors between computed and measured data are described.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.2
• /
• pp.107-113
• /
• 2008

This paper presents half wavelength partial H-plane filters with multiple attenuation poles using narrow H-plane slot of evanescent waveguide. The narrow H-plane slot operates as an admittance inverter o( the bandpass filter and, simultaneously, generates an attenuation pole at particular frequency. Therefore, proposed filters with attenuation poles are simply implemented without any additional coupling and extra modification of the structure. The number of attenuation poles of the filters equals to that of the H-plane slots. Moreover, proposed filters are compact waveguide filter since ones are embodied by partial H-plane waveguide which has 1/4 cross section of conventional waveguide. The third and fourth-order half wavelength filters having 4 and 5 attenuation poles, respectively, are designed in H-band and their frequency responses are confirmed by simulation and measurement.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.1
• /
• pp.23-28
• /
• 1999

Rectangular waveguide slot antenna which has simple structure, high efficiency, high trust and small size, is extending in a field of application such as many Radar and Microwave communication. A slot cut into a wall of waveguide is propagated electromagnetic wave to free space it interrtupts the flow of current inner conductor of waveguide. Therefore incident of slot, cutdepth, width, length, i.e. are important parameter of characteristic change of the slot antenna. Result from difficulty of theoretical analysis about slot frequently experimental measured data useful design and manufacture have been accomplished. In this paper, we find the suitable method of analysis that compare two analysis results with measured result of established literature - admittance of slot be solved by propagated power from electric field distribution of slot and mode current computation and accomplishment of computable chart which hasresonant length and cutdepth, incident of slot, i.e. and use the HFSS which applyed finite-element method obtain equal slot analyed method.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.1
• /
• pp.115-121
• /
• 2012

In this paper, the design and fabrication of slot array in the broad wall of the waveguide for Ka-band monopulse radar are discussed. The aperture distributions are designed for the desired antenna gain, beamwidth and Side-lobe Level(SLL), and then slot parameters, such as lengths and offsets, are obtained for corresponding to each slot admittance in the equivalent circuit by using Elliot's array synthesis procedure. MWS-CST simulation shows the return loss below -10 dB, antenna gain above 32 dBi, 3 dB beamwidth of 3.7 degree and SLL of -20 dB. In order to demonstrate the expected results, the designed antenna is fabricated and measured.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.6
• /
• pp.586-594
• /
• 2013

This paper proposes a new coupling element of microwave slot coupler for designing waveguide slot array which can reduce the effect of undesired higher order mode coupling between coupling and radiating slots in the branch waveguide. The proposed device is composed of a centered longitudinal shunt-series coupling slot at the center of broad wall shared by two crossed rectangular waveguides and an asymmetric compound iris that excites the coupling slot. We first have obtained scattering parameters for the proposed coupler by use of EM S/W tool HFSS and then extracted the parameters of T- network equivalent circuit for the coupling slot. We also have analyzed the resonant properties such as resonant length and normalized admittance by changing the geometrical dimensions. The measured results for the fabricated coupler with short-circuited block ${\lambda}_g/4$ away from the coupling slot are well agreed with the simulated ones.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.10 s.89
• /
• pp.1005-1010
• /
• 2004

An analysis method of slot-coupled microstripline to waveguide transition is presented to developed a simple but accurate equivalent circuit model. The equivalent circuit consists of an ideal transformer, microstrip open stub, and admittance elements looking into a waveguide and a half space of feed side from a slot center. The related circuit element values are calculated by applying the reciprocity theorem, the Fourier transform and series representation, the complex power concept, and the spectral-domain immittance approach. The computed scattering parameters are compared with the measured, and good agreement validates the simplicity and accuracy of the proposed equivalent circuit model.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.20 no.6
• /
• pp.1-5
• /
• 1983

A new equation, which enables us to calculate the characteristics of coupled slot-lines on a dielectric substrate, is derived. Their calculations are based on the single slot-line analysis of S.B. Cohn, but each equation of total admittance in the even mode and the odd mode is derived by a different approach. The results agree with Knorr and Kuchler's data.