• 한국전기전자재료학회논문지
• /
• 제21권7호
• /
• pp.585-593
• /
• 2008

In this work, we report several experimental data capable of evaluating the phase transformation characteristics of GeSbTe pseudobinary thin films comprehensively utilized as phase change materials. The phase transformation of the GeSbTe thin films was confirmed by XRD measurement from amorphous to hexagonal structure via fee structure except for $Ge_8Sb_2Te_{11}$. In addition, X-ray photoelectron spectra analysis revealed to weaken Ge-Te bond for $Ge_2Sb_2Te_5$ and to strengthen the bonds of all elements for $Ge_8Sb_2Te_{11}$ during the amorphous to crystalline transition. The values of optical energy gap $(E_{OP})$ were around 0.71 and 0.50 eV and the slopes of absorption in extended region (B) were ${\sim}5.1{\times}10^5$ and ${\sim}10{\times}10^5cm^{-1}{\cdot}V^{-1}$ for the amorphous and fcc-crystalline structures, respectively. Finally, the kinetics of amorphous-to-crystalline phase change on the GeSbTe films was characterized using a nano-pulse scanner with 658-nm laser diode (power; $1{\sim}17$ mW, pulse duration; $10{\sim}460$ ns).

• 전기학회논문지
• /
• 제58권4호
• /
• pp.867-872
• /
• 2009

Peak expiratory flow rate(PEF) is one of the most important diagnostic parameters in spirometry. PEF occurs in a very short duration during the forced expiratory maneuver, which could lead to measurement error due to non-ideal dynamic characteristic of the transducer. In such case the initial slope of the flow rate signal determines the accuracy of the measured PEF. The present study considered this initial slope as a parameter to compensate PEF. The 26 standard flow rate signals recommended by the American Thoracic Society(ATS) were flown through the air flow transducer followed by simultaneous measurements of PEF and maximum transducer output$(N_{PEF})$. $N_{PEF}$-PEF satisfied a quadratic equation in general, however, two signals (ATS #2 and #26) having large initial slopes deviated from the fitting equation to a significant degree. The relative error was found to be in a linear relationship with the initial slope, thus, $N_{PEF}$ was appropriately compensated to provide accurate PEF with mean relative error less than only 1%. The 99% confidence interval of the mean relative error was less than a half of the error limit of 5% recommended by ATS. Therefore, PEF can be very accurately determined by compensating the transducer output based on the initial slope, which should be a useful technique for air flow transducer calibration.

• 한국지반공학회논문집
• /
• 제19권6호
• /
• pp.407-418
• /
• 2003

지반의 풍화, 지하수의 유출입 및 대기온도의 변화 등, 사면 내 토립자의 물성을 변화시킬 수 있는 요인에 대한 영향과 이로 인한 사면의 파괴면을 예측할 수 있다면, 사면에 대한 장기 안정성을 확보하는데 도움을 줄 것이다. 사면의 거동에 영향을 미치는 여러 요인들 가운데, 지중 온도의 변화는 지하수 및 토립자의 물성을 변화시켜, 사면의 붕괴에 많은 영향을 끼치므로 사면내의 온도의 변화구간과 항온 구간을 구분할 수 있다면, 사면의 가상 파괴면을 예측할 수 있을 것이다. 본 연구에서는 사면 현장에 설치된 상용계측기 및 광섬유를 이용한 계측기(FBG Sensor)의 사면 계측 데이터를 바탕으로, 사면 보강재의 변형에 의한 사면의 가상활동 파괴면의 추정과 지중온도가 변하지 않는 깊이인 항온심도의 결정, 그리고 이들의 연관성을 검토하였다. 본 연구의 검토결과, 사면 보강재에 의해 결정된 사면의 가상 파괴면과 지반 내 항온심도가 거의 일치하였으며, 지하수의 유무가 지반내 항온심도를 결정하는 중요한 요인임을 알 수 있었다.

• 한국의류학회지
• /
• 제32권3호
• /
• pp.349-361
• /
• 2008

The purpose of this study was to develop bodice basic patterns fitted on different body types of adult women. To meet this purpose, first, human bodies were measured using tight fitting technique and classified based on the shapes of upper trunk. The subjects were 214 women $20{\sim}39$ years of age. For the measurement of female upper trunk, tight fitting technique was utilized. The development of figures of upper trunks were obtained from women. These development of figures were then digitized and analysed using the PAD system. A total of 155 measurements were taken from each of the development of figures. then, 32 measurements were selected for the further analysis. As complimentary data, 22 direct body measurements using an anthropometric method and 23 body measurements using a photographic method from the side view pictures of the participants were also obtained. The results and discussions of this study are as follows: Using the body measurements from the development of figures, a factor analysis and a cluster analysis were conducted. As a result, the body types were classified into 5 different types, which differ in terms of bust volumes, shoulder slopes, shoulder tilts, back silhouettes, body axises. The prominent characteristics of each type are as follows: The first type has a large bust volume. The second type has a right figure. The third type has a rounded back silhouette. The fourth type has a back silhouette of scapular coming backward. Finally the fifth type has a shoulder tilted forward.

• Journal of Forest and Environmental Science
• /
• 제32권2호
• /
• pp.196-204
• /
• 2016

In this study, vegetation succession and the rate of consequent topsoil development were investigated in shallow landslide scars of sedimentary rock slopes covered by volcanic ashes and pumice in Kagoshima prefecture, Japan. Seven shallow landslide scars of different ages were selected as study areas. In the initial period after the occurrence of a shallow landslide, deciduous broad-leaved trees such as Mallotus japonicus or Callicarpa mollis were occupied in the areas. Approximately 30 years after the landslide, evergreen broad-leaved trees such as Cinnamomum japonicum invaded in the areas, already existed present deciduous broad-leaved trees. After 50 years, the summit of the canopy comprised evergreen broad-leaved trees such as Castanopsis cuspidata var. sieboldii and Machilus thunbergii. Moreover, the diversity of vegetation invading the site reached the maximum after 15 years, followed by a decrease and stability in the number of trees. The total basal areas under vegetation increased with time. It was concluded that the vegetation community reaches the climax stage approximately 50 years after the occurrence of a shallow landslide in the study areas, in terms of the Fisher-Williams index of diversity (${\alpha}$) and the prevalence of evergreen broad-leaved trees. Moreover, according to the results of topsoil measurement in the study areas, the topsoil was formed at the rate of 0.31 cm/year. The development of topsoil usually functions to improve the multi-faceted functions of a forest. However, when the increased depth of topsoil exceeds the stability threshold, the conditions for a shallow landslide occurrence are satisfied. Therefore, we indicated to control the depth of topsoil and strengthen its resistance by forest management in order to restrain the occurrence of shallow landslides.

• 한국지반공학회논문집
• /
• 제21권6호
• /
• pp.147-154
• /
• 2005

본 연구는 매립지 최종 복토층의 체적함수비 측정을 위한 저주파수 WCR(Water Content Reflectometer)의 Calibration 에 관한 것이고, Calibration의 검증은 흙의 전기전도도와 물성치를 이용하여 평가하였다. WCR 주기에 대한 체적함수비의 선형 Calibration은 높은 상관성을 보였다. 흙의 전기전도도가 증가할수록 Calibration의 기울기가 감소하는 것으로 나타났다. Calibration의 기울기는 점토의 함유량, 유기질의 함유량, 액성한계, 소성한계가 높은 흙, 즉, 전기전도도가 전형적으로 높은 흙에서 낮은 값을 보였다. 낮은 주파수영역을 갖는 WCR을 활용하여 좋은 계측결과를 얻을 수 있다는 것이 본 연구를 통해 보여지고 있다.

• 한국정보통신학회논문지
• /
• 제16권3호
• /
• pp.615-625
• /
• 2012

운동자들의 운동 정보를 측정하기 위하여 스마트 폰의 운동 애플리케이션들은 GPS장치에서 얻은 정보들을 사용한다. 이러한 애플리케이션에서 사용자에게 제공하는 운동정보는 뛰거나 걸은 거리, 시간, 칼로리 소모량, 평균 속도 등 이다. 이들 중 운동한 거리는 모든 정보의 바탕이 되므로 정확한 측정이 필요하다. 그러나 현재 사용되는 거리 측정법은 지구를 구 또는 타원으로 가정하여 계산하기 때문에 실제 운동거리와는 오차가 생기게 된다. 실제로 지구의 표면은 경사로 이루어져 있기 때문이다. 본 논문에서는 이 오차를 보정하여 지형의 경사도를 반영한 새로운 거리측정 알고리즘을 제안한다. 제한된 알고리즘의 성능을 평가하기 위하여 스마트 폰을 기반으로 한 운동 라이프가이드 시스템을 구축하였다. 실험을 통하여 제안된 알고리즘이 보다 정확한 운동 거리 측정 정보를 제공함을 보인다.

• 대한공간정보학회지
• /
• 제13권1호
• /
• pp.3-10
• /
• 2005

근거리 디지털 영상을 이용하여 도로 사면의 3차원 변형을 효율적으로 측정하고자 하였다. 두 시기에 각각 동일한 다중지점 기하배치 상에서 스틸비디오 영상을 취득하고 종래의 표준적 광속조정과 자유망 광속조정에 의하여 각각 사진삼각측량 처리를 행하고 또한 토털스테이션에 의한 측지학적 방법과 비교하였다. 1mm 이내의 표준오차와 $1/30,000{\sim}1/36,000$의 상대정확도로 대상점들의 3차원 좌표 및 변형량을 도출할 수 있었으며, 자유망 광속조정이 표준적 광속조정에 비해 13%까지 높은 정확도를 나타내었다. 자유망 광속조정법을 적용한다면 복잡한 산업현장에서 기준점측량을 병행하지 않고 신속하고 정확한 변형측량을 기대할 수 있음을 확인할 수 있었다.

• 한국측량학회지
• /
• 제25권6_1호
• /
• pp.507-516
• /
• 2007

Segmentation and organization of the LiDAR (Light Detection and Ranging) data of the Earth's surface are difficult tasks because the captured LiDAR data are composed of irregularly distributed point clouds with lack of semantic information. The reason for this difficulty in processing LiDAR data is that the data provide huge amount of the spatial coordinates without topological and/or relational information among the points. This study introduces LiDAR data segmentation technique by utilizing histograms of the LiDAR height image data and analyzing roof shape for 3D reconstruction and visualization of the buildings. One of the advantages in utilizing LiDAR height image data is no registration required because the LiDAR data are geo-referenced and ortho-projected data. In consequence, measurements on the image provide absolute reference coordinates. The LiDAR image allows measurement of the initial building boundaries to estimate locations of the side walls and to form the planar surfaces which represent approximate building footprints. LiDAR points close to each side wall were grouped together then the least-square planar surface fitting with the segmented point clouds was performed to determine precise location of each wall of an building. Finally, roof shape analysis was performed by accumulated slopes along the profiles of the roof top. However, simulated LiDAR data were used for analyzing roof shape because buildings with various shapes of the roof do not exist in the test area. The proposed approach has been tested on the heavily built-up urban residential area. 3D digital vector map produced by digitizing complied aerial photographs was used to evaluate accuracy of the results. Experimental results show efficiency of the proposed methodology for 3D building reconstruction and large scale digital mapping especially for the urban area.

• Applied Biological Chemistry
• /
• 제15권2호
• /
• pp.143-162
• /
• 1972

Based on the concentration of $^{40}K$ naturally occurring radioisotope of potassium, a method for the determination of total potassium in soils and plants was developed. The method was extended to evaluate the potassium supplying power of soils by taking the ratio of exchangeable potassium to total potassium $(K_{ex}/K_t)$, termed the potassium buffering capacity. Using this as index, it was observed that the release of potassium from soil fellows the from order reaction. A linear relationship was found between the potassium buffering capacity and the release constant of potassium or mica content of the clay. Similarly the potassium buffering capacity was also closely correlated with total uptake of potassium by rice plant. Hence it is concluded that the method for determining of the potassium buffering capacity could be veil applied to characterize the potassium availability of soils. The method for the determination of potassium is characterized by (1) The efficient measurement of the weak beta activity emissions from the samples, (2) identification of $^{40}K$, (3) calculation of total potassium content using the proportional constant of $^{40}K$ of samples to that of the standard. Difference in the potassium supplying power of soils due to soil types was also evaluated with the use of this technique. The degree of the potassium supplying power was in the order of soil types as red-yellow podzolic and lateric soils, basaltic materials(Rvd)> low-humic gley and alluvial soils, alluvial plains and food plains(Apa)> low-humic gley soils, nearly level to sloping local alluvial plains and slopes(Afb)> low-humic gley and alluvial soils, fluvio-marine plains (Fma).