• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.737-739
• /
• 2015

In this paper, a novel method of sensorless control scheme is proposed to apply on a single phase hybrid SRM used in high speed operation. The proposed method utilizes beneficially permanent magnet field whose performance is motor parameter independent to estimate the rotor position. Also, the current slope is adopted to complete the sensorless control when the motor running with heavy torque at high speed condition. Through this approach, the adjustable turn on/off position can be achieved without prior knowledge of inductance profile which is always employed by many sensorless schemes. And this paper may offer an available method to do the sensorless control in hybrid SRM used for high speed running.

• Journal of Biomedical Engineering Research
• /
• v.30 no.6
• /
• pp.510-515
• /
• 2009

In this paper, variable characteristic ratio algorithm based on oscillometric method is proposed to enhance the accuracy of blood pressure measurement. We combined the slope-based approach and fuzzy inference technique to change the characteristic ratios of height-based method. The proposed algorithm was assessed on 255 measurements from 85 subjects and compared with the conventional height-based algorithm. The testing results showed that the developed algorithm achieved an overall grade A for both systolic and diastolic blood pressures according to the BHS protocol. And, mean standard deviation between the observers and the developed algorithm were 5.71mmHg and 6.29mmHg for systolic and diastolic pressures respectively, which also fulfilled the AAMI criteria. In conclusion, this algorithm was successfully developed and recommended for further clinical trials with the wider adult population.

• The Korean Journal of Applied Statistics
• /
• v.25 no.4
• /
• pp.633-640
• /
• 2012

Biological methods are described for the assay of certain substances and preparations whose potency cannot be adequately assured by chemical or physical analysis. The principle applied through these assays is of a comparison with a standard preparation to determine how much of the examined substance produces the same biological effects as a given quantity (the Unit) of the standard preparation. In these dilution assays, to estimate the relative potencies of the unknown preparations to the standard preparations, it is necessary to compare dose-response relationships of standard and unknown preparations. The dose-response relationship in the dilution assay is non-linear and sigmoid when a wide range of doses is applied. The parallel line model (applied to the dose region with the steepest slope) is used to estimate the relative potency. In this paper, the statistical theory in the parallel line model is explained with an application to a dilution assay data. The parallel line method is implemented in a SAS program and is available at the author's homepage(http://cafe.daum.net/go.analysis).

• Communications for Statistical Applications and Methods
• /
• v.23 no.2
• /
• pp.179-187
• /
• 2016

The fixed effects panel probit model faces "incidental parameters problem" because it has a property that the number of parameters to be estimated will increase with sample size. The maximum likelihood estimation fails to give a consistent estimator of slope parameter. Unlike the panel regression model, it is not feasible to find an orthogonal reparameterization of fixed effects to get a consistent estimator. In this note, a hierarchical Bayesian model is proposed. The model is essentially equivalent to the frequentist's random effects model, but the individual specific effects are estimable with the help of Gibbs sampling. The Bayesian estimator is shown to reduce reduced the small sample bias. The maximum likelihood estimator in the random effects model is also efficient, which contradicts Green (2004)'s conclusion.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.3
• /
• pp.376-381
• /
• 2012

This paper deals with application of instrumented indentation technique for quality inspection methodology for automobile component. For this, the instrumented indentation tests were performed the normal and cracked compressor journal, which is made from spheroidal graphite cast iron and utilized in air-conditioning system. And the Brinell hardness was estimated using the unloading slope and maximum indentation force. With the aid of Normal distribution, this Brinell hardness was statistically compared and analyzed with hardness measured by indentation hardness tests. Also, application possibility of reliability-based quality inspection criteria for compressor journal was evaluated through the probabilistic analysis for the Brinell hardness estimated by instrumented indentation technique.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.11a
• /
• pp.203-210
• /
• 2004

The average temperatures by the land cover class, by the elevation extent, by the slope and by the aspect have been calculated using multitemporal Landsat TM band 6 and DEM. For this, the TM band 6 data from October 21, 1985, June 2, 1992, September 1, 1996, May 7, 2000 and the 28.5m x 28.5m grid elevation data of Seoul have been used. From the varying curve of the average land surface temperature by the elevation extent, the presence of the atmospheric inversion phenomenon and the scope of the inversion layer can be inferred. Especially, the average land surface temperature by the aspect can be effective for deciding a road line. For these reasons, it is expected that temperature estimation using remote sensing data shall be effective for the survey of heat damage, environmental temperature monitoring, and urban and environmental Planning usage.

• Journal of the Korean Solar Energy Society
• /
• v.28 no.6
• /
• pp.1-7
• /
• 2008

The wind resource potentials of South Korea are estimated as preliminary stage using the national wind map which has been being established by numerical wind simulation and GIS (Geographical Information System) exclusion analysis. The wind resource potentials are classifying into theoretical, geographical, technical and implementation potentials and the calculation results are verified by comparing to other countries' potentials. In GIS exclusion, urban, road, water body, national parks and steep slope area are excluded from onshore geographical potential while water depth and offshore distance from the shoreline are applied as offshore exclusion conditions. To estimate implementation potential, dissemination records of European countries are adopted which is about 1/8 of geographical potential. The implementation potential of South Korea would correspond 12.5GW which is 1.7 times of the national wind energy dissemination target until 2030.

• The Bulletin of The Korean Astronomical Society
• /
• v.38 no.1
• /
• pp.38.1-38.1
• /
• 2013

We present observational estimation of the infrared (IR) luminosity function (LF) of local (z < 0.3) star-forming (SF) galaxies derived from the AKARI NEP-Wide samples. We made an analysis of the NEP-Wide data with optical spectroscopic information allowing an accurate determination of luminosity function. Spectroscopic redshifts for about 1650 objects were obtained with MMT/Hectospec and WIYN/Hydra, and the median redshifts is about 0.22. To measure the contribution of SF galaxies to the luminosity function, we excluded AGN sample by comparing their SEDs with various model template. Spectroscopic redshifts and the AKARI's continuous filter coverage in the mid-IR (MIR) wavelength (2 ~ 25 micron) enable us to avoid large uncertainties from the mid-IR SED of galaxies and corresponding k-corrections. The 8-micron luminosity function shows a good agreement with the previous works in the bright-end, whereas it seems not easy to constrain the faint-end slope. The comparison with the results of the NEP-Deep data (Goto et al. 2010) suggests the luminosity evolution to the higher redshifts, which is consistent with the down-sizing evolutionary pattern of galaxies.

• Journal of the Korean Geotechnical Society
• /
• v.17 no.4
• /
• pp.241-247
• /
• 2001

절리가 발달한 암반사면의 경우, 토사사면의 안전율 평가를 위해 널리 이용되는 한계평형법을 이용한 해석법은 파괴 활동면을 가장할 수 없기 때문에 사용이 곤란하다. 한편, 비등방 탄소성 모델(편재절리모델)을 사용하여 2조의 절리군을 가진 암반사면의 안전율을 계산할 수 있는 방법이 개발되었지만, 이 방법은 개별절리를 효과적으로 고려하지 못한다. 본 연구에서는 개별절리를 고려한 불연속체 해석에 의한 암반사면의 안정성 해석시 사면의 안전율을 평가하는 기법을 개발하였다. 이를 위해, 절리 전단강도 감소기법을 적용하였으며, UEDC의 내장 언어인 FISH를 사용하여 프로그램을 개발하였다. 또한 실제 절리 암반사면을 대상으로 절리를 측정하고, 개발된 기법에 의한 사면의 안전율을 구하였으며, 동일한 사면에 대해 등가연속체로 가정한 편재절리모델 해석을 수행하여 결과를 비교하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.160-163
• /
• 2010

분포형 강우-유출모형의 모의결과는 지형, 토지피복 및 토양 특성에 영향을 받는다. 그 중에서 지형과 관련하여 하도에 위치한 셀의 경사는 첨두 유출량의 도달시간과 매우 밀접한 관계가 있다. 분포형 강우-유출모형에서 하도의 지형적 특성은 모든 하도 셀마다 입력되어야 하는데 셀이 위치한 지점별로 실제 하천측량을 통해 입력하는 것이 가장 정확한 방법일 수 있으나 시간과 많은 비용이 소요되므로 DEM(Digital Elevation Model)으로부터 산정된 경사 값을 주로 적용한다. 본 연구에서는 충주댐유역의 2006~2008년 수립된 13개 하천의 하천정비기본계획을 참고하여 1,100개 횡단측점에 대한 하상경사를 구축하고 유역의 흐름경로길이와의 관계를 분석함으로서 분포형 강우-유출모형의 하상경사를 적용할 수 있는 산정공식을 개발하였다. 4개 강우사상에 대하여 적용하여 DEM으로부터 산정된 경사를 적용한 경우와 비교한 결과 첨두유량이 증가하고 첨두유출 발생시간이 단축되는 결과를 나타내었다.