• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.825-830
• /
• 2005

Cut slope and facility of management investigation is the protection of humans and properties. it is very important the prevention of disaster facility and the damage of the slope protection facility. It is very difficult to forecast slope stability, disaster possibility and collapse. It will be able to minimize the damage which it prepare against slope facility and cut slope of deformable investigation and collapse and the disaster. therefore those deformable investigation is important. Investigations execute upheaval, crack, sliding for slope and cut slope reinforcement. Investigation executes forecast in place where the construction problem, the effect which the damage in road traffic or the contiguity facility.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.1060-1067
• /
• 2009

Previous research on the slope failure has mainly reported that most of the slope failures occur due to surface rainfall infiltration in the rainy season. A slope of which surface is protected by shotcrete or plants, can also fail due to increase in pore water pressure from the ground water flow beneath the surface, rather than from the surface. In this study such case of slope behavior is investigated using the model test and numerical method including strength reduction method. Hydraulic boundary conditions of the slopes is considered using coupled numerical scheme. The failure mechanism of the slope is investigated and the effect of pore water pressure on slope safety is identified. Increase in pore water pressure due to lateral infiltration has significantly reduced the stability of slope.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 가을 학술발표회 논문집
• /
• pp.374-381
• /
• 2002

Several sensor systems are used to estimate the reinforceing effect of pile in hihg cut slopes, and to find a failure zone in slopes effectively. Inclinometer, extensometer and V/W sensor have shown a great potentiality to serve real time health monitoring of the slope structures. They were embedded or attached to the structures, we conducted field tests and test results have shown great solutions for sensor systems of Civil Engineering Smart Structures. This research is to seek for the relationships among the slope movement and the reinforceing effect of pile, and the strain distribution in a active zone by analyzing the data from the in-situ measurement so that the possible failure zone should be well defined based on the relationships. Also, the relationships between temperature and reinforceing effect of pile, and the strain distribution are estimated in this paper.

• Computers and Concrete
• /
• 제16권1호
• /
• pp.179-190
• /
• 2015

An experimental program has been carried out to investigate the effect of edge-slope on compressive strength of concrete specimens. In this study, effect of such slope was investigated by testing 100 standard cylinder specimens and 40 standard cubes. When molds are put on a slanted place, wet concrete starts to flow through the open end of mold. It keeps flowing until it reaches to a parallel surface with the place over which it was placed. That creates a sloped surface over the loading area. Experimental results revealed significant relationships between failure loads and slope of loading surface for cylinders. Angled cracks occurred in sloped cylinder specimens. Tension cracks occurred in cube specimens. Fracture mechanisms were also evaluated by using finite element analyses approach. Experiments yielded an exponential curve with bandwidth for cylinders. Average value of curve is $y={\frac{\pi}{2}}e^{-cf}$ between slope and compressive strength. Inclination is much effective parameter for cylinders than cubes.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 추계 학술발표회
• /
• pp.241-255
• /
• 2006

Owing to a landslide or embankment damage be caused by a localized torrential downpour and heavy snowfall resulted from recent abnormal climate, a slope stability is very important. This study is investigate a general slope reinforcement method and applicability improvement of soil nailing method utilized prototype loading test for the facing stiffness effect confirmation. A prototype loading test supplements general slope stability study by numerical analysis or laboratory test with a resonable analysis of slope structure.

• 한국정밀공학회지
• /
• 제34권3호
• /
• pp.191-197
• /
• 2017

Light detection and ranging (LiDAR) is one of the most efficient technologies to obtain the topographic and bathymetric map of coastal zones, superior to other technologies, such as sound navigation and ranging (SONAR) and synthetic aperture radar (SAR). However, the measurement results using LiDAR are vulnerable to environmental factors. To achieve a correspondence between the acquired LiDAR data and reality, error sources must be considered, such as the water surface slope, water turbidity, and seafloor slope. Based on the knowledge of those factors' effects, error corrections can be applied. We concentrated on the effect of the seafloor slope on LiDAR waveforms while restricting other error sources. A simulation regarding in-water beam scattering was conducted, followed by an investigation of the correlation between the seafloor slope and peak timing of return waveforms. As a result, an equation was derived to correct the depth error caused by the seafloor slope.

• 한국환경복원기술학회지
• /
• 제6권3호
• /
• pp.56-68
• /
• 2003

The main purpose of this study was to verify the shore margin protection effect of the root system of Salix gracilistyla Miq. developed from direct sticking cuttings on wetland, through the measurement of root growth and comparison of soil slaking rate depending on the planting method applied to shore-marginal slope. Comparison of growth rate and soil dispersion rate was made between five planted slope and one naked slope. The planting methods applied to the planted slope were (a) horizontally layed burying of stick(45cm) bundle (b) horizontally layed covering the slope with sticks (c) horizontally fencing with normal cuttings(20cm) (d) elected sticking of normal cutting at equal distances (e) random scattering short cuttings(3-4cm). As results, the most effective planting method was horizontally layed burying, and in order to increase its efficiency scattering the live stem chips in 2-3cm on the slope is recommended. The growth of root was negatively regressive to the distance from water floor.

• 한국환경복원기술학회지
• /
• 제9권6호
• /
• pp.123-132
• /
• 2006

This research was studied to inverstigate the effect of plant mixtures and tackifibers on the vegetation of slope sites. 5 type plant mixtures(tree type, forest type, native herbaceous plant type, foreign herbaceous plant type, and cool-season turfgrass type) and 3 different tackifibers (Guar tackifibers, Polyarchrylamide tackifibers and Cellulose methyl starch) were treated with 3 replications on the experimented slope. The germination and coverage rate were high on native and foreign herbaceous plants and low on cool-season turfgrass, forest and tree types. We could notice that herbaceous plant types were effective on the vegetation of slope in the short term. Because tree or forest type vegetations similar to natural plant habitat, however, were preferable on slope vegetation in the long term, tree species of high germination rate should be selected in this experiment for tree or forest type slope vegetations. Tackifiber treatments increased the germination rate during the early treatment stage. However, the effect of tackifiber treatment on germination rate was decreased on the elapse of time. Guar tackifiber treatment was most effective on the vegetation of slope. As far as soil erosion control was concerned, all tackifiber treatments were effective compared to control.

• 한국지반공학회논문집
• /
• 제26권10호
• /
• pp.5-14
• /
• 2010

토사안정제를 이용한 비탈면 보강공법은 환경친화적이고 원지반의 강도증대를 통한 비탈면안정성을 확보하는 방법이다. 그러나 비탈면 보강공법으로 적용할 경우 현장토질과의 혼합에 따른 실제 강도증가 정도가 명확하지 못하고 보강효과에 대한 연구가 부족하여 현장에서 많이 적용되고 있지 못하고 있는 실정이다. 본 논문에서는 토사안정제 혼합율에 따른 지반강도증가 효과를 알아보고 수치해석을 통하여 비탈면 설계 적용시 비탈면 높이에 따른 적정 보강두께를 제시하고자 하였다. 실험결과 토사안정제 함량별로 강도증가가 차이는 있지만 대략 2.0~3.0배정도 강도가 증가 효과가 있는 것으로 나타났으며 수치해석을 통해서도 비탈면 높이에 따른 적정높이를 산정할 수 있었다. 향후 비탈면 보강목적으로 토사안정제의 활용도가 높을 것으로 판단된다.

• 한국농공학회지
• /
• 제15권2호
• /
• pp.2980-3001
• /
• 1973

Nozzle is a part of sprayer and is consists of several elements; swirl plate, vortexchamber, cap and body. The travelling distance of sprayed particles is important in the wide reach nozzle. The factors to influence the travelling distance of the sprayed particles may be the helical angle of swirl plate, the distance of vortex hamber, the slope and the size of cap hole. The study was conducted to examine the effects of these factors on the travelling distance. The results of this study are summarized as follows; 1) There was higher positive correlation(+0.96) between the maximum travelling distance for which amount of sprayed particles was 5cc/cm min. and centro-position of the travelling distance. 2) There was a higher positive correlation(+0.85) between total discharge of sprayed particles and the centro-position of the travelling distance. 3) Main effects and interaction effects of helical angle, pressure, vortex chamber distance and cap slope were significantly affected the travelling distance of sprayed particles. 4) Main effects of helical angle, pressure and cap slope were especially highly significant to influence the travelling disance. 5) Helical angle, pressure, vortex chamber distance and cap slope influenced spraying forward velocity of dise hole, among which cap slope and pressure of nozzle was the most important factors. 6) Effect of change of helical angle on the travelling distance of sprayed particles, was generally a quadratic, the least value of the distance being showed about $45^{\circ}$ and the largest at about $15^{\circ}\;and\;55^{\circ}$, the decreasing rate of the change between $15^{\circ};and\;25^{\circ}$ was very small. 7) Effect of change of pressure on the travelling distance sprayed particles was generally a linear, the increasing rate of the charge was about 1.68, which was the most effective compared to the change of the other factors. 8) Effect of change of vortex chamber distance on the spraying distance was also generally a linear, the increasing rate being about 0.16, which was the least effective. 9) Effect of change of cap slope on the travelling distance was also generally a linear, the increasing rate was about 0.61 and its effect was about medium.