• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.451-457
• /
• 2008

The aim of the sturdy is for the development of Bridge plate installing on floor for SETPA Sliver line V. SEPTA train have pocket sliding door which is similar with domestic trains. typically In the USA railway market, Portable type and standing type bridge plate used, easily hiding the bridge plate in stowed position and convenience operation, Bridge plate installed on floor is designed. relative regulation Like CFR APTA, and EN, UIC is reviewed and compared.

• Journal of the Korea Furniture Society
• /
• v.11 no.2
• /
• pp.73-78
• /
• 2000

This study was carried out to measure formaldehyde emission with the passing of two years from plywood, sliver-board and strand-board bonded with urea resins which were made of 6 f/U molar ratios. The urea resins were manufactured by six kinds of formaldehyde/urea molar ratio of 1.0, 1.2, 1.4, 1.6, 1.8 and 2.0. 1. The plywood with molar ratio of 1.0 satisfied the KS F3101 $F_2$ directly after manufacture. The plywood with molar ratio of 1.2 satisfied m 3 days. The plywood with molar ratio of 1.4 satisfied the $F_3$ in 3 days and the $F_2$ in 600 days. And the plywood with molar ratio of 1.8 and 2.0 satisfied the $F_3$ in 365 days, but didn't satisfy the $F_2$ in 730 days. 2. Sliver-board with molar ratio of 1.0 and 1.2 satisfied the KS F3104 $E_2$ right after manufacture. Sliver-board with molar ratio of 1.4 and 1.6 satisfied in 150 and 360 days, respectively. Sliver-board with molar ratio of 1.8 and 2.0 satisfied in 730 days. 3. Strand-board with molar ratio of 1.0 and 1.2 satisfied the KS F3104$ E_2$ directly after manufacture. Strand-board with molar ratio of 1.4 and 1.6 satisfied in 150 days. But Strand-board with molar ratio of 1.8 and 2.0 didn't satisfied in 730 days.

• Human Ecology Research
• /
• v.57 no.3
• /
• pp.329-340
• /
• 2019

The 'Sliver-Spoon-Discourse' is currently witnessing growing complaints about the polarization and a sense of despair among many young people in Korean society. The 'Sliver-Spoon-Discourse' that compares one's subjective socioeconomic status to a spoon implies a sense of psychological superiority or deprivation. The present study empirically tested the current popular 'Sliver-Spoon-Discourse' based belongingness and explored how subjective socioeconomic status may affect the psychology of young people. This study examined the effects of subjective socioeconomic status on individual relative deprivation and subjective well-being. Data were collected from 307 undergraduate students enrolled at universities located in Seoul with both parents alive. The findings of this study were as follows. First, student respondents reported moderate levels of subjective socioeconomic status, relative deprivation, and subjective well-being. Second, after controlling for respondents' gender, age and family income, the students' subjective socioeconomic status was negatively associated with their level of relative deprivation. Finally, after controlling for respondents' sociodemographic characteristics, the students' subjective socioeconomic status was not significantly related to all the three sub-factors of life satisfaction, positive emotion and negative emotion as well as total subjective well-being. The results indicate that 'Sliver-Spoon-Discourse' based belongingness may instigate relative deprivation of young people without affecting their subjective well-being. The implications of the results are discussed for youth programs and policies.

• Textile Coloration and Finishing
• /
• v.16 no.2
• /
• pp.25-33
• /
• 2004

Melange yams were prepared by varing the ratio of raw cotton dyed with Indigo, Gardenia and Sappan wood colorants, respectively. The antibacterial activity and deodorization on melange yarns were evaluated for bacteria reduction rate and deodorization rate. The bacterial reduction rate on melange yarns was explored with Staphylococcus aureus, Klebsiella pneumoniae. The melange yarns on the ratio of raw cotton dyed with Sappan wood and Indigo showed high Staphylococcus aureus reduction rate of 99% and 90%, regardless of Al-mordanting treatment, but those with Gadenia hardly showed bacteria reduction rate. The melange yarn showed high Klebsiella pneumoniae reduction rate of 99% for Al-mordanting treatment with Sappan wood. The others were poor. The deodorization of 81% and 98∼99% obtained with melange raw sliver and melange sliver dyed with Indigo, Gardenia and Sappan wood colorants, but dyeing did not significantly affect deodorization rate.

• Conservation Science in Museum
• /
• v.9
• /
• pp.1-15
• /
• 2008

We observed the section and microstructure by Scanning Electron Mirrorscope (SEM) for 4 'Bowls, white porcelain with impressed floral design and sliver bound rim' and 1 'Dish, white porcelain with sliver bound rim', which was manufactured by reverse firing and metal bound rim was wrapped to the part of not being spread glaze at inlet, in Jingdezhen white porcelains, the relics dug from the seabed of Shinan conserved in National Museum of Korea, and found that the ingredient of metal rim was not silver but tin as a result of measuring by BEI of Energy Dispersive Spectroscopy (EDS). And as a result of survey with Fourier transform infrared spectroscopy(FT-IR) for checking the method of joining metal rim of mouth part, it was found that joining was made with materials made of lacquer.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.12
• /
• pp.2508-2510
• /
• 2007

• Fibers and Polymers
• /
• v.7 no.4
• /
• pp.424-431
• /
• 2006

Roll drafting, a mechanical operation attenuating fiber bundles to an appropriate thickness, is an important operation unit for manufacturing staple yams. It influences not only the linear density regularity of the slivers or staple yams that are produced, but also the quality of the textile product and the efficiency of the thereafter processes. In this research, the dynamic states of the fiber bundle in the roll drafting zone were analyzed by simulation, based on the mathematical model that describes the dynamic behavior of the flowing bundle. The state variables are the linear density and velocity of the fiber bundles and we simulated the dynamics states of the bundle flow, e.g., the profiles of the linear density and velocity in the draft zone for various values of the model parameters and boundary conditions, including the initial conditions to obtain their influence on the dynamic state. Results showed that the mean velocity profile of the fiber bundle was strongly influenced by draft ratio and process speed, while the input sliver linear density has hardly affected the process dynamics. Velocity variance of individual fibers that could be supposed to be a disturbing factor in drafting was also influenced by the process speed. But the major disturbance occurred due to the velocity slope discontinuity at the front roll, which was strongly influenced by the process speed. Thickness of input sliver didn't play any important role in the process dynamics.

• Journal of the Korean Wood Science and Technology
• /
• v.27 no.2
• /
• pp.38-45
• /
• 1999

This study was to figure out proper Formaldehyde/Urea molar ratio of UF resin with satisfactory bonding strength of plywood and properties of particleboard. The six kinds of UF resins were manufactured with F/U molar ratio 1.0, 1.2, 1.4, 1.6, 1.8, and 2.0. The boards were made of three kinds of raw materials : Veneer, Sliver-Particle and Strand-Particle. Manufacturing condition of plywood : amount of mixing resin was 150g/$m^2$. The fourty secs/mm simple-pressing schedule in the pressure 10kgf/$m^2$ was applied for 480mm${\times}$700mm board at the temperature of $110^{\circ}C$ in a hot press. Manufacturing condition of particleboard : Target density was 0.65g/$cm^2$. The stepwise 9 minutes- multi-pressing schedule in the maximum pressure 40kgf/$cm^2$, the minimum pressure 15kgf/$cm^2$ was applied for $480mm{\times}634mm{\times}12mm$ board at the temperature of $150^{\circ}C$ in a hot press. The results are as follows : I. In bonding strength, plywood which was made by F/U molar ratio 1.2 showed the highest value. Other molar ratio resin also gave the satisfied value of KS standard, 7.5kgf/$cm^2$. 2. In internal bond strength of particleboard, Sliver-Particleboard(SLPB) and Strand-Particleboard(STPB) varied respectively from 5.9kgf/$cm^2$ to 4.8kgf/$cm^2$, from 6.7kgf/$cm^2$ to 5.4kgf/$cm^2$. SLPB with F/U=1.2 and STPB with F/U=1.6 had higher IB value. Also, both SLPB and STPB showed lower IB value in F/U molar ratio 2.0 and 1.0. 3. SLPB and STPB with six kinds of UF resin respectively satisfied bending strength of KS standard 150 Type(130kgf/$cm^2$) and 200 Type(180kgf/$cm^2$). Bending strength data for both of SLPB and STPB showed little or no loss from F/U=1.8 to F/U=1.2. Also, STPB was approximately two times higher than that of SLPB. Therefore, the raw material's shape had more effect on bending strength than the FlU molar ratio. 4. F/U=1.6 and 1.4 showed the lower thickness swelling in SLPB and STPB. All of STPBs satisfied thickness swelling of KS standard, under 12%.

• Journal of Broadcast Engineering
• /
• v.23 no.6
• /
• pp.876-885
• /
• 2018

Although e-sports broadcasting market based on VR(Virtual Reality) is growing in these days, technology development for securing market competitiveness is quite inadequate in Korea. Global companies such as SLIVER and Facebook already developed and are trying to commercialize 360 VR broadcasting technology which is able to broadcast e-sports in 4K 30FPS VR video. However, 2D video is too poor to use for 360 VR video in that it brings less immersive experience and dizziness and has low resolution in the scene. this paper, we not only proposed and implemented virtual camera technology which is able to capture in-game space as 360 video with 4K 3D by 60FPS for e-sports VR broadcasting but also verified feasibleness of obtaining stereo 360 video up to 4K/60FPS by conducting experiment after setting up virtual camera in sample games from game engine and commercial games.

• Journal of the Korean Applied Science and Technology
• /
• v.10 no.1
• /
• pp.1-8
• /
• 1993

The possibilities for HPLC analysis of lipids have been revolutionised by the availability of evaporative light-scattering detectors, with which the response is independent of the nature of the mobile phase and does not depend On the presence of specific chromophores in the lipids. It was thus possible to develop an HPLC procedure, involving ternary gradient elution, for separating all the lipid classes in animal tissues in a single step. Although reversed-phase HPLC has been widely used for the analysis of molecular species of lipids, sliver ion chromatography can be a valuable alternative. For example, a stable silver ion column for HPLC was developed which permitted resolution of molecular species of triacylglycerols, even from such complex samples as fish oils, again With light-scattering detection and gradient elution. The capacity for HPLC resolution of diastereomeric diacyl-sn-glycerol derivatives, prepared from triacylglycerols. has lead to a new simple method for stereospecific analysis of the latter.