• Transactions on Electrical and Electronic Materials
• /
• 제2권3호
• /
• pp.12-17
• /
• 2001

It is shown in the present study that during the HTS (hot temperature storage) test, the metal contamination by impure elements can be highly susceptible to the void formation, leading to the open failure of the power line in the memory device. Such a functional failure associated with the metal contamination was investigated to be dominant in the early stages of the HTS test while the formation of a stress-driven void is mainly observed in the later stages. In particular, it was found that the void formed in the contaminated metal takes on a slit-like shape which has been known to be characteristic of the stress-related voiding. The impure elements leading to the metal degradation were identified to be carbon and oxygen introduced during the metal sputtering process. The experimental works show that the device reliability was significantly improved by reducing the level of such impure elements within metal. It is shown in the present study that during the HTS (hot temperature storage) test, the metal contamination by impure elements can be highly susceptible to the void formation, leading to the open failure of the power line in the memory device. Such a functional failure associated with the metal contamination was investigated to be dominant in the early stages of the HTS test while the formation of a stress-driven void is mainly observed in the later stages. In particular, it was found that the void formed in the contaminated metal takes on a slit-like shape which has been known to be characteristic of the stress-related voiding. The impure elements leading to the metal degradation were identified to be carbon and oxygen introduced during the metal sputtering process. The experimental works show that the device reliability was significantly improved by reducing the level of such impure elements within metal.

• 한국응용곤충학회지
• /
• 제24권4호
• /
• pp.179-182
• /
• 1986

$1983{\sim}1984$ 제(第)에 걸쳐 한국인삼연초연구소 수원경작시험장 인삼포(人蔘圃) 및 그 주변에서 궁뱅이를 채집(採集)하여 외부형태상(外部形態上)의 특징, 종구성(種構成) 및 인삼가해여부(人蔘加害如否)를 조사(調査)하여 다음과 같은 결과를 얻었다. 1. 채집(採集)된 굼뱅이는 항문공(肛門孔)의 모양과 여상부에 있는 융기선(隆起線)의 유무(有無)에 따라 검정풍뎅이 아과(亞科), 줄풍뎅이 아과(亞科), 우단풍뎅이 아과(亞科)로 나뉘어지고, 이들은 다시 두부(頭部)나 제10복절(第10腹節) 복면(腹面)의 자모(刺毛) 배열(配列), 두개(頭蓋)의 광택 정도에 띠라 8종(種)으로 분류(分類)되었다. 2. 인삼포(人蔘圃) 주변의 포장(圃場)이나 휴한지(休閑地)에서 주로 다색풍뎅이 애풍뎅이 다색줄풍뎅이 참검정풍뎅이 큰검정풍뎅이 등이 채집(採集)되었으나, 인삼포(人蔘圃)에서는 참검정풍뎅이와 큰검정풍뎅이만이 발견되었으며 이들의 인삼(人蔘) 가해(加害)가 확인되었다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 추계학술대회
• /
• pp.420-425
• /
• 2003

Generally, reverse engineering means getting CAD data from unidentified shape using vision or 3D laser scanner system. In this paper, we studied unidentified model by machine vision based reverse engineering system to get information about in-processing model. Recently, vision technology is widely used in current factories, because it could inspect the in-process object easily, quickly, accurately. The following tasks were mainly investigated and implemented. We obtained more precise data by corning camera's distortion, compensating slit-beam error and revising acquired image. Much more, we made similar curves or surface with B-spline approximation for precision. Until now, there have been many case study of shape recognition. But it was uncompatible to apply to the field, because it had taken too many processing time and has frequent recognition failure. This paper propose recognition algorithm that prevent such errors and give applications to the field.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
• /
• pp.628-631
• /
• 1988

This paper describes a fingerprint classification on the basis of feature points(whorl, core) and feature vector and uses a syntactic approach to identify the shape of flow line around the core. Fingerprint image is divided into 8 by 8 subregions and fingerprint region is separated from background. For each subregion of fingerprint region, the dominant ridge direction is obtained to use the slit window quantized in 8 direction and relaxation is performed to correct ridge direction code. Feature points(whorl, core, delta) are found from the ridge direction code. First classification procedure divides the types of fingerprint into 4 class based on whorl and cores. The shape of flow line around the core is obtained by tracing for the fingerprint which has one core or two core and is represented as string. If the string is acceptable by LR(1) parser, feature vector is obtained from feature points(whorl, core, delta) and the shape of flow line around the core. Feature vector is used hierarchically and linearly to classify fingerprint again. The experiment resulted in 97.3 percentages of sucessful classification for 71 fingerprint impressions.

• 반도체디스플레이기술학회지
• /
• 제19권3호
• /
• pp.30-35
• /
• 2020

A microlens has been fabricated by various methods such as a thermal reflow, hot embossing, diamond milling, etc. However, these methods require a relatively complex process to control the microlens shape. In this work, we report on a simple and cost-effective method to fabricate a cylindrical microlens (CML), which can diffuse light widely. We have employed a slot-die head with the dual plate (a meniscus guide with a protruded μ-tip and a shim with a slit channel) for coating of a narrow stripe using poly(methyl methacrylate) (PMMA). We have shown that the higher the coating gap, the lower the maximum coating speed, which causes an increase in the stripe width and thickness. The coated PMMA stripe has the concave shape. To make it in the shape of a convex microlens, we have applied the thermal reflow method. When the stripe thickness is small, however, its effect is negligible. To increase the stripe thickness, we have increased the number of repeated coating. With this scheme, we have fabricated the CML with the width of 223 ㎛ and the thickness of 7.3 ㎛. Finally, we have demonstrated experimentally that the CML can diffuse light widely, a feature demanded for light extraction efficiency of organic light-emitting diodes (OLEDs) and suppression of moiré patterns in displays.

• 대한기계학회논문집A
• /
• 제21권11호
• /
• pp.1862-1870
• /
• 1997

A fast and precise technique to measure 3-dimensional coordinates of an object is proposed. It is essential to take the 3-dimensional measurements of the object in design and inspection. Using this developed system a surface model of a complex shape can be constructed. 3-dimensional world coordinates are projected onto a camera plane by the perspective transformation, which plays an important role in this measurement system. According to the shape of the object two measuring methods are proposed. One is rotation of an object and the other is translation of measuring unit. Measuring speed depending on image processing time is obtained as 200 points per second. Measurement resolution i sexperimented by two parameters among others; the angle between the laser beam plane and the camera, and the distance between the camera and the object. As a result of these experiments, it was found that measurement resolution ranges from 0.3mm to 1.0mm. This constructed surface model could be used in manufacturing tools such as rapid prototyping machine.

• 한국구조물진단유지관리공학회 논문집
• /
• 제14권2호
• /
• pp.82-88
• /
• 2010

본 연구의 목적은 내진규준이 적용되기 이전에 건설된 역사건물의 내진성능 평가 및 내진보강이다. 이를 위하여 2층 RC 역사건물의 내진성능이 평가되었다. 동적해석에 의한 층간변위비 및 층전단력 평가결과, 층전단력이 설계기준의 밑면전단력을 초과하는 것으로 평가되어 적절한 내진보강이 필요한 것으로 평가되었다. 내진성능 향상을 위하여 총 4개의 강재댐퍼가 사용되었다. 해석 변수는 강재댐퍼 형상 및 설치 방법이다. 동적해석결과 역 K가새로 설치되는 슬릿댐퍼가 다른 댐퍼 형상 및 설치 방법보다 우수한 내진성능을 가진 것으로 평가되었다.

• 한국의류산업학회지
• /
• 제25권3호
• /
• pp.346-357
• /
• 2023

The purpose of this study is to develop clothing customized for dealing with patients with severe dementia. Based on the results of previous studies, The research patient clothing was designed to reduce the physical fatigue experienced by caregivers when dressing and undressing patients by changing the position and shape of the split in the patient's clothing. This study used qualitative and quantitative methods to measure the extent to which these modifications improved the ease of dressing and undressing the research patient. The research patient clothing was developed by moving the rear-center zipper to the side and changing the zipper from being half-open to fully open. Muscle energy consumption and fatigue generation were analyzed using EMG signals at the following sites: brachioradialis, biceps, triceps, anterior deltoid, medial deltoid, posterior deltoid, upper trapezius and erector spinae. Results indicated that the modified research patient clothing required less muscle energy and the occurrence of muscle fatigue decreased overall compared to traditional patient clothing. This was supported by the qualitative subjective evaluation, which revealed that dressing and undressing was easier with the modified clothing. In conclusion, repositioning of the back zipper to the side and the fully open slit shape significantly reduced caregiver fatigue when dressing and undressing patients.

• Journal of the Korean Wood Science and Technology
• /
• 제45권1호
• /
• pp.53-61
• /
• 2017

본 연구에서는 고강성, 고인성의 경량화된 목질접합부를 제작하기 위하여 슬릿 가공된 기둥부재 중앙에 강판 대용인 목질접합물을 삽입하고 기둥부재와 목질접합물만 결합된 시험편들을 제작하였다. 시험편들은 강판을 사용한 대조군 시험편과 모멘트 저항성능을 비교분석하였다. GFRP보강목질적층판과 핀으로 제작된 시험편들은 강판삽입형 시험편 보다 평균 24% 저하된 최대모멘트가 측정되었으나 양호한 인성이 관찰되었다. 파괴형상은 기둥부재의 연단부분에서 연륜을 따라 파괴되었다. 집성재와 목질적층판을 접착제로 일체화한 강절형 시험편은 대조군 시험편보다 초기강성이 2.8배 향상되었고, 최대모멘트도 평균 40% 향상된 경향을 보였다. 강절형 시험편들은 접착층 주위에서 파단되었다.

• 한국산학기술학회논문지
• /
• 제14권5호
• /
• pp.2113-2120
• /
• 2013

본 연구는, LED 칩 패키지에 있는 토출된 형광체 수지의 모양을 인라인 측정을 통해 개발된 검사 시스템을 기초로 한 효율적인 머신 비전에 관한 연구이다. 형광체의 반투명 특성 때문에 조사된 빛이 칩의 표면뿐만 아니라 하단 부에서도 반사된다. 이러한 현상이 LED 칩 검사의 신뢰성을 저하시키기 때문에 적절한 조명 광학계를 결정하기 위해 백색광 LED 와 635nm의 레이저 슬릿 빛을 이용하여 검사하였다. 또한, 광 삼각측정법을 이용해 정반사와 분산반사법으로 검사를 수행하였다. 실험 결과 백색 슬릿 광과 정반사 반사법의 조합이 가장 좋은 검사 결과를 낸다는 것을 확인할 수 있었다. Catmull-Rom 스플라인 보간법을 이용하여 측정된 데이터를 부드러운 표면 형상으로 나타내었다. 측정 결과를 통해 개발된 시스템이 LED 칩 패키징 공정에 인라인 검사에 성공적으로 적용될 수 있다는 결론을 내릴 수 있다.