• Journal of Korean Association for Spatial Structures
• /
• v.22 no.4
• /
• pp.39-48
• /
• 2022

The energy dissipation of inverted V-type eccentric steel braced frames can be achieved through the yielding of a slit link, through yielding of a number of strips between slits when the frame is subjected to inelastic cyclic deformation. On the other hand, the development of seismic resistance system without residual deformation is obtained by applying the superelasdtic shape memory alloy (SMA) material into the brace and link elements. This paper presents results from a systematic three-dimensional nonlinear finite element analysis on the structural behavior of the eccentric bracing systems subjected to cyclic loadings. A wide scope of structural behaviors explains the horizontal stiffness, hysteretic behaviors, and failure modes of the recentering eccentric bracing system. The accurate results presented here serve as benchmark data for comparison with results obtained using modern experimental testing and alternative theoretical approaches.

• IEIE Transactions on Smart Processing and Computing
• /
• v.5 no.1
• /
• pp.63-69
• /
• 2016

This paper presents methods to improve the effectiveness of electromagnetic shielding. The slit appears in an enclosure's surface to ventilate. Slits may also appear due to power supply lines or to serve as a communication link between electronic circuits inside and outside the box. We simulated electromagnetic radiation in different conditions in order to propose a method to improve the effectiveness of electromagnetic shielding to ensure electromagnetic compatibility using CST software (Computer Simulation Technology).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.10
• /
• pp.6270-6275
• /
• 2014

The paper reports an improvement method on torque ripples of multi-pole interior permanent magnet synchronous motor (IPMSM) applied to a traction motor for hybrid electric vehicles. In the case of multi-pole IPMSM, the magnetic flux generated by a permanent magnet tends to leak through the bridge of the rotor without a link with stator windings. The slit design on the rotor surface was proposed to reduce torque rippling and increase the output power by reducing the leakage flux. Two design parameters for the slit are suggested for optimal design using the response surface method. As an analysis method, the 2D finite element method (FEM) was applied to consider magnetic saturation effect.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1995.04a
• /
• pp.306-315
• /
• 1995

This paper presents a bin picking method using a slit beam laser in which a robot recognizes all of the unoccluded objects from the top of jumbled objects, and picks them up one by one. Once those unoccluded objects are removed, newly developed unoccluded objects underneath are recognized and the same process is continued until the bin gets empty. To recognize unoccluded objects, a new algorithm to link edges on slices which are generated by the orthogonally mounted laser on the xy table is proposed. The edges on slices are partitioned and classified using convex and concave function with a distance parameter. The edge types on the neighborhood slices are compared, then the hamming distances among identical kinds of edges are extracted as the features of fuzzy membership function. The sugeno fuzzy integration about features is used to determine linked edges. Finally, the pick-up sequence based on MaxMin theory is determined to cause minimal disturbance to the pile. This proposed method may provide a solution to the automation of part handling in manufacturing environments such as in punch press operation or part assembly.

• The Research Journal of the Costume Culture
• /
• v.17 no.5
• /
• pp.886-896
• /
• 2009

Acjurumpo is one of the most representatives daily outfit of Joseon Dynasty is a clothes which has a characteristic of having creases under the armhole and it has a lot of chance to use on modern clothes design. This study wants to provide a information on traditional clothes to the public and modernize traditional clothes by designing modern women clothes by adapting Acjurumpo, one of Joseon Dynasty's men' daily outfit which is not very well-known to publics as a link of traditional clothes modernization. Acjurumpo's characteristic is usually having a knife-shape collar and having two sup and one sup, but outside sup of having two sup was more common. There were tongsu, duri, as a example of shape of sleeve. For Mu the combinations were different from Acjurum starting with a shape of trapezoid, triangle to big Mu on a body of side line. For Gorum there were two pairs of long and short Gorum, two pairs of short Gorum or one pair of short or long Gorum. Slit of po was on both side or back. Acjurumpo which was adapted on modern clothes, it was usually used on Hanbok companies that used traditional shape or similar shape to design children' clothes. This study designed three summer one-piece and two winter jacket for women clothes adapting Acjurumpo. And it was designed by using modern material adapting Acjurumpo's characteristics, changing knife-shape collar, Acjurum, mu and Gorum. This study expects for popularization of many traditional clothes developed by modern design in future.

• Advances in materials Research
• /
• v.5 no.3
• /
• pp.193-203
• /
• 2016

Compared to metal-to-metal tribology, polymer tribology presents further complexity as it is more prone to be influenced by operating conditions. Over the past two decades, progress in the field of wear of polymers has led to the establishment of more refined wear mechanisms. The current paper establishes the link between different load parameters and the wear rate of polymers, based on experimental investigations. A pin-on-plate reciprocating tribometer was used to examine the wear behaviour of polyamide sliding against a steel counterface, under constant and fluctuating loads, in dry conditions. In addition, the influence of controlled imperfections in the polymer surface upon its wear rate were examined, under cyclic and steady loading, in order to better understand surface fatigue wear of polymers. The imposed imperfections consisted of vertical artificial deep crack (slit) perpendicular or parallel to the direction of sliding. The study concludes with the followings findings; in general, wear of polymers shows a significant tendency to the type of applied load. Under cyclic loads, polymers show an increase in wear rate compared to those tested under static loads. Such increase was found to increase with the increase in cyclic load frequency. It is also demonstrated that surface cracks results in higher wear rates, particularly under cyclic loads.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.9
• /
• pp.156-166
• /
• 1995

This paper presents a bin picking method using a slit beam laser in which a robot recognizes all of the unoccluded objects from the top of jumbled objects, and picks them up one by one. Once those unoccluded objects are removed, newly developed unoccluded objects underneath are recognized and the same process is continued until the bin gets empty. To recognize unoccluded objects, a new algotithm to link edges on slices which are generated by the orthogonally mounted laser on the xy table is proposed. The edges on slices are partitioned and classified using convex and concave function with a distance parameter. The edge types on the neighborhood slices are compared, then the hamming distances among identical kinds of edges are extracted as the features of fuzzy membership function. The sugeno fuzzy integration about features is used to determine linked edges. Finally, the pick-up sequence based on MaxMin theory is determined to cause minimal disturbance to the pile. This proposed method may provide a solution to the automation of part handling in manufacturing environments such as in punch press operation or part assembly.