• 수산해양기술연구
• /
• 제14권2호
• /
• pp.69-78
• /
• 1978

알루미나이징강에 대하여 초기마모영역에서 rolling-sliding 마모시험을 한 결과를 요약하면 다음과 같다. 1) 2차 확산재의 내마모성이 가장 우수하고 처녀재에 비하여 저응력 레벨에서 약 18%, 고응력에서 약 40%의 마모감소를 나타낸다. 2) 2차 확산재는 피복층과 합금층 경계부근의 공공생성으로 인하여 예상보다 내마모성이 낮다. 3) 알루미나이징강의 rolling-sliding 접촉에 의한 마모파양의 형태는 spalling 이며 spalling crack은 합금속의 경계부근에서 발생한다.

• 정보처리학회논문지C
• /
• 제15C권4호
• /
• pp.281-288
• /
• 2008

최근 하드웨어의 발달로 무선 센서네트워크를 이용하여 멀티미디어 데이터를 수집하기 위한 멀티미디어 센서네트워크에 관한 연구가 활발히 이루어지고 있다. 멀티미디어 데이터들은 텍스트 형태의 데이터들에 비해 크기가 매우 크며 데이터를 구성하는 일부의 패킷이 손실되면 전체 데이터가 쓸모가 없어지는 경우가 많아 데이터간 관련성이 매우 크다. 따라서 멀티미디어 데이터를 전송하기 위해서는 신뢰성이 보장되어야만 한다. 하지만 기존의 텍스트 기반 데이터를 위한 전송프로토콜들은 대부분 신뢰성보다는 네트워크의 효율성을 목적으로 연구되어져 멀티미디어 데이터를 전송하기에 적합하지 않다. 본 논문에서는 센서네트워크에서의 신뢰성 있는 비동기적 이미지 전송 프로토콜인 RAIT를 제안한다. RAIT는 네트워크 혼잡으로 인한 패킷 손실을 방지하기 위하여 노드간 이미지 전송시 이중 슬라이딩 윈도우 기법을 적용한다. 노드간 통신장애로 인한 패킷 손실을 방지하기 위한 수신큐를 위한 슬라이딩 윈도우뿐만 아니라 혼잡으로 인한 패킷손실이 발생하는 전송큐를 위한 슬라이딩 윈도우를 통하여 이미지 전송의 신뢰성을 보장한다. 상위노드는 하위노드들을 이미지별로 비선점형으로 스케즐링하여 패킷손실을 없애면서 노드간 형평성을 높인다. 이중슬라이딩 윈도우를 구현하기 위하여 RAIT에서 라우팅 레이어와 큐 레이어를 제어하도록 하는 크로스레이어 기법을 적용한다. 실험을 통하여 RAIT가 기존 프로토콜에 비해 신뢰성 있게 이미지 전송을 보장함을 보인다.

• 한국전자통신학회논문지
• /
• 제4권3호
• /
• pp.211-216
• /
• 2009

채터링 현상은 VSS의 주요한 약점이며 이 문제를 극복하기위하여 많은 연구들이 발표되었다. 슬라이딩 섹터 이론이 최근에 발표되었으며, 본 논문에서는 섹터 내부에 연속입력함수를 가진 슬라이딩 섹터이론을 이용하여 시변 경계층을 가진 퍼지제어를 제안하고, 슬라이딩 섹터에 리아프노프 함수를 이용하여 안정도를 분석한다. 역진자 시스템에 컴퓨터 시물레이션을 통하여 채터링 현상의 제거를 확인한다.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 제35회 춘계학술대회
• /
• pp.310-316
• /
• 2002

In this study, the effects of oxide layer formed on the wear tracks of TiN coated silicon wafer on friction and wear characteristics were investigated. Silicon wafer was used for the substrate of coated disk specimens, which were prepared by depositing TiN coating with $1{\mu}m$ in coating thickness. AISI 52100 steel ball was used for the counterpart. The tests were performed both in air for forming oxide layer on the wear track and in nitrogen to avoid oxidation. This paper reports characterization of the oxide layer effects on friction and wear characteristics using X-ray diffraction (XRD). Auger electron spectroscopy (AES), scanning electron microscopy (SEM) and sliding tests.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2001년도 제33회 춘계학술대회 개최
• /
• pp.401-405
• /
• 2001

The effects of oxide layer formed on TiN coated ball and counter-body have been investigated from the frictional point of view during sliding tests. AISI52100 steel ball was used for the substrate of coated specimens. Two types of coated specimens were prepared by depositing TiN coating with 1 and 4$\mu\textrm{m}$ in coating thickness. AISI1045 steel was used for the disk type counter-body. To investigate the effect of oxide layer on the contact parts of two materials, the tests were performed both in ambient for forming oxide layer on the contact parts and in nitrogen environment to avoid oxidation.

• 한국산학기술학회논문지
• /
• 제16권2호
• /
• pp.1469-1476
• /
• 2015

산지가 전국토의 70%를 차지하는 국내 지형의 특성으로 인하여, 철도선로 전체 노선의 상당부분을 교량구간이 차지한다. 이에 따라 교량 설계 시 경제성 증가를 위하여 경간장을 늘리는 것이 유리하지만 궤도-교량 상호작용에 의한 레일의 부가축응력, 변위 등의 문제로 인한 제약이 발생한다. 본 연구에서는 궤도와 교량 상판 사이에 설치되는 슬라이딩 층을 고려한 궤도-교량 상호작용 해석을 수행하였다. 수치해석 결과를 통해 슬라이딩층 설치 방법에 따른 상호작용 거동을 분석하였으며, 궤도-교량 상호작용이 저감된 새로운 궤도-교량 구조시스템의 개발방향을 제안하였다.

• Tribology and Lubricants
• /
• 제36권1호
• /
• pp.18-26
• /
• 2020

The effects of the carburizing process on the sliding wear behavior of SCM420H steel have been investigated. In particular, the effects of grain boundary corrosion observed in the surface layer after gas carburizing and the effects of hardness of the carburized cases after heat-treatment on the sliding wear properties were examined. Pin specimens carburized by two methods (gas carburizing and vacuum carburizing) were tempered at two temperatures of 180℃ and 400℃ after oil-quenching, respectively. Sliding wear tests were carried out against heattreated SKH51 steel at several sliding speeds using a pin-on-disc type test machine. As results, it can be found that there is no difference in the wear behavior between the pins carburized using two methods. This implies that the grain boundary corrosion that formed in the surface layer after gas carburizing has no effect on the sliding wear behavior of carburized SCM420H steels. Additionally, there is no significant difference in the wear behavior between carburized pins tempered at 400℃ and at 180℃ after oil-quenching, regardless of the carburizing method. This is because carburized pins tempered at 400℃ have a troostite structure, which exhibits higher tribochemical reactivity even though its hardness is lower than that of martensite structure. In this respect, it can be considered that good wear resistance of carburized cases is maintained at least until the effective case depth.

• Tribology and Lubricants
• /
• 제19권3호
• /
• pp.151-158
• /
• 2003

In metal cutting at the tool-chip interface, friction generates considerable amount of heat. Thus, the knowledge of wear properties of cutting tool material in high temperature has been as one of important factors in need of clarification. The authors presented the wear properties of 5%Co-5%V-1%Nb high speed steel, fabricated by powder metallurgy, in room temperature in previous articles. The objective of this paper is to clarify the effects of temperature on its wear properties. Wear tests in sliding conditions under various temperatures have been conducted using the pin-on-disc type wear test machine. The results indicate that the wear properties of 5%Co-5%V-1%Nb high speed steel in high temperature as well as in room temperature are excellent. It may be deduced that the oxide layer formed on worn surface at high temperature is stable enough to prevent wear due to the high temperature strength of its matrix.

• Tribology and Lubricants
• /
• 제27권3호
• /
• pp.147-155
• /
• 2011

The ceramic coatings are excellent materials of cutting tools and sliding parts. To evaluate the wear characteristics of very thin ceramic coated layer, it is very important to investigate its wear process microscopically. An effective method for investigating the wear of a thin layer is the observation of wear process in microscopic detail using in-situ system. In this study, using the SEM Tribosystem as in-situ system, the microscopic wear mode of TiN coatings was investigated in repeated sliding. As results, four modes were observed for TiN coatings: Ploughing, powder formation, flake formation and coating delimitation. The observation of the microscopic wear by in-situ system can clarify the allowable stress of TiN coating.

• Tribology and Lubricants
• /
• 제8권1호
• /
• pp.63-69
• /
• 1992

In order to gain better understanding of wear behaviors of TiN-coated boron cast iron, tests and analyses were conducted with block-on disc type tribometer. TiN layer of thickness $2 \mu m$ and $4 \mu m$, coated by cathodic arc evaporation process, were experimentally investigated with the variation of applied load and sliding speed under dry sliding condition. Wear characteristics were expressed in terms of the three-dimentional wear map as well as the wear rate vs sliding speed and load. Comparisons of wear and friction characteristics between coated cast irons and uncoated cast irns were also made. Wear mechanism of TiN layer was explained in view of surface interaction between the mating surfaces. The thicker coating exhibited higher hardness and adhesion strength. the significance of stresses at the surface and in the subsurface was briefly discussed in relation to the wear behavior.