• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.867-870
• /
• 1996

Often an INS has to be aligned in navigation. In these cases it is necessary to obtain some reference information on the state of the aligned INS(Slave) such as its position, its velocity of its angular rate. Usually the reference information is velocity which is supplied by another reference INS. In the alignment state the velocity computed by the reference INS(Master) is compared with that computed by the slave INS and the difference which is indicative of the slave misalignment with respect to the master, is processed by a Kalman filter which estimates misalignment as well as the slave gyro and accelerometer error states. The operation of aligning a slave INS with a master INS comparing quantities computed by both INS is known as transfer alignment. The delivery vehicle performs error these maneuvers enable the TA Kalman filter to separate between the tilt errors and the accelerometer biases which otherwise are unobservable. The basic objective this paper is to study the observability enhancement by ship's maneuvering and matching methods during transfer alignment at sea.

• 제어로봇시스템학회논문지
• /
• 제5권8호
• /
• pp.948-954
• /
• 1999

In this paper, we propose a cooperative motion planning algorithm for two tightly-coupled mobile robots. Specifically, the considered cooperative work is that two mobile robots should transfer a long rigid object along a predefined path. To resolve the problem, we introduce a master-slave concept for two obile robots having the same structure. According to the velocity of the master robot and the positions of two robots on the path, the velocity of the slave robot is determined. The slave normally tracks the master's motion, but in case that the velocity of the slave exceeds the velocity limit, the roles of the robots should be interchanged. The effectiveness of the proposed algorithm is proved by computer simulations.

• 한국정밀공학회지
• /
• 제15권5호
• /
• pp.153-160
• /
• 1998

A master-slave system for tele-operation had been developed and tested for several decades. In this paper the master robot is composed of several wires and provides position information of the handle which is driven by a operator within the master robot work space. A PC is used for the command calculation for a slave robot. This paper deals with the relation between the number of strings and D.O.F of the master robot, control method of the slave robot during the operation and the monitoring method over the working area by the computer graphics simulation. The D.O.F of the master robot can be modified by adding or subtracting some strings. The controller of the slave robot uses the advanced PD control method to keep the performance against varying working load.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.100.6-100
• /
• 2002

The crane and the master-slave manipulators (MSM) are widely used as a remote handling device in nuclear facilities such as the hot cell. The equipment to be installed in the hot cell should be optimally placed within the workspace of the wall-mounted slave manipulator for the maintenance operation. Also, the slave manipulator with the end effectors should be properly positioned and oriented for the dedicated maintenance operation. Hence, the workspace and the motion of the slave manipulator, as well as, the remote operation task should be analyzed before installing the manipulators and the hot cell equipment. For this purpose, the 3D graphic simulator, which simulates the remote operation o...

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.838-843
• /
• 1991

A telemanipulator that reflects grasping force of the slave gripper to the human operator was implemented in order for manipulation to be more delicate and safe. An industrial robot gripper was used as the slave manipulator. The master manipulator was constructed to make it easy for a human operator to direct the slave and to feel the reflected gripping force. Reflected force was generated by the servomotor of the master. The force signal and position signals of the master and the slave was used to generate driving force signal. Basically position-position type control was used. Miner force feedback is added to improve the performance of the system. Implemented system was tested by colliding two fingers of the slave manipulator, and here switching was used to archive more fast and easy manipulation.

• ETRI Journal
• /
• 제34권4호
• /
• pp.553-563
• /
• 2012

Serial peripheral interface (SPI) has been identified as a bottleneck in many wireless sensing systems today. SPI is used almost universally as the physical connection between the microcontroller unit (MCU) and radios, storage devices, and many types of sensors. Virtually all wireless sensor nodes today perform up to twice as many bus transactions as necessary to transfer a given piece of data, as an MCU must serve as the bus master in all transactions. To eliminate this bottleneck, we propose the master-handoff protocol. After the MCU initiates reading from the source slave device and writing to the sink slave device, the MCU as a master becomes a slave, and either the source or the sink slave becomes the temporary master. Experiment results show that this master-handoff technique not only cuts the data transfer time in half, but, more importantly, also enables a superlinear energy reduction.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.985-989
• /
• 1990

This paper presents a fundamental study of a millimeter-sized master-slave robot driven by conduit-guided wires, which is expected to be applied to the delicate surgical operations, the assembling precise and small parts and so on. This system consists of a millimeter-sized slave robot and a master manipulator of which the size is adapted to a human finger. Displacement and torque of the master side can be reduced and transferred to the slave robot by controlling the motor torque against the master torque by feeding back tension signals. The master can feel the tensions by the motor torque. In this paper, the design method and making process of the master-slave system and the dynamical characteristic of displacement and torque control are proposed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.337-339
• /
• 2007

This paper proposes a new paradigm for cooperation of multi-robot system for home service. For localization of each robot. the master robot collects information of location of each robot based on communication of RFID tag on the floor and RFID reader attached on the bottom of the robot. The Master robot communicates with slave robots via wireless LAN to check the motion of robots and command to them based on the information from slave robots. The operator may send command to slave robots based on the HRI(Human-Robot Interaction) screened on masted robot using information from slave robots. The cooperation of multiple robots will enhance the performance comparing with single robot.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.519-519
• /
• 2000

Since the dynamics of the slave manipulator with high reduction ratio joints is likely to be much slower than that of the master manipulator, the control input the slave manipulator is so frequently saturated. This paper proposes a bilateral teleoperation control scheme for 2-DOF manipulators with high reduction ratio joints, which can effectively compensate the control input saturation. In the proposed scheme, the controllers of the slave manipulator are designed with an anti-windup feature and forces caused by the saturation are reflected to the operator holding the operating handle of the master manipulator. When the control input of the slave manipulator is saturated, the master manipulator moves slowly file to tile reflected forces. In this way, the position tracking performance of the slave manipulator with high reduction ratio joints can be enhanced regardless of saturation. The proposed scheme is shown to give excellent position tracking performance through a series of experiments.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 D
• /
• pp.2380-2382
• /
• 2001

The objective of this paper is to design a force feedback controller for bilateral control of a master-slave manipulator system using fuzzy sliding mode control. In a bilateral control system the motion of the master device is followed by slave the one. While the force applied to the slave is reflected on the master. In this paper, a proposed controller applied to the system. Adding a switching control term to the input, robustness is improved. Also the knowledge of the system dynamics is not needed. The computer simulation results show the performance of the proposed fuzzy sliding mode controller.