• 한국정밀공학회지
• /
• 제15권12호
• /
• pp.212-219
• /
• 1998

During machining of dies and molds with sculptured surfaces. the cutter contact area changes continuously and results in cutting force variation. In order to implement cutting force prediction model into a CAM system, an effective and fast method is necessary. In this paper. a new method is proposed to predict mean cutting force. The cutter contact area in the spherical part of the cutter is obtained using Z-map, and expressed by the grids on the cutter plane orthogonal to the cutter axis. New empirical cutting parameters were defined to describe the cutting force in the spherical part of cutter. Before the mean cutting force calculation, the cutting force density in each grid is calculated and saved to force map on the cutter plane. The mean cutting force in an arbitrary cutter contact area can be easily calculated by summing up the cutting force density of the engaged grid of the force map. The proposed method was verifed through the slotting and slanted surface machining with various inclination angles. It was shown that the mean force can be calculated fast and effectively through the proposed method for any geometry including sculptured surfaces with cusp marks and holes.

• 한국CDE학회논문집
• /
• 제3권3호
• /
• pp.161-167
• /
• 1998

Cutting forces in ball-end milling of slanted surfaces are calculated. The cutting area is determined from the Z-map of the surface geometry and current cutter location. The obtained cutting area is projected onto the cutter plane normal to the Z-axis and compared with cutting edge element location. Cutting force is calculated by integration of elemental cutting forces of engaged cutting edge elements. Experiments with various slanted angles were performed to verify the proposed cutting force estimation model. It is shown that the proposed method predicts cutting force effectively for any geometry including sculptured surfaces with cusp marks and surfaces with pockets and holes.

• 한국기계가공학회지
• /
• 제9권5호
• /
• pp.14-19
• /
• 2010

A computational study was carried out to analyze the characteristics of supersonic (Mach 2.0) coaxial/off-axis jet's impingements on a slanted kerf surface in laser machining. The effects of various parameters such as gas pressure, distance between nozzle exit and kerf edge surface, and application of off-axis nozzles on the impingement phenomena of the assist-gas on kerf surface were observed. The present study showed that simply increasing the assist-gas pressure for coaxial supersonic nozzle was not effective to alleviate the strength of flow separation on kerf surface. It also presented the optimized operating condition of the coaxial nozzle to have the highest skin friction values over kerf surface.

• 대한기계학회논문집B
• /
• 제35권2호
• /
• pp.153-160
• /
• 2011

레이저가공에서 가공부위의 용융물질을 제거하는 보조가스의 역할을 살펴보기 위하여, 절단경사면에 충돌하는 초음속 동축/탈축노즐 유동의 특성이 실험적으로 관찰되었다. 보조가스의 압력, 노즐과 절단면과의 사이거리, 절단폭, 그리고 탈축노즐의 위치 등 다양한 관계변수의 변화에 대하여, 수백 개의 고해상도의 쉴러린 영상이 획득되었다. 그 결과, 단순한 보조가스의 증가가 절단면 하부에서 발생하는 유동박리를 제거하는데 효율적이지 않음이 관찰되었고, 절단폭의 증가와 탈축노즐의 운용으로 절단면에서의 박리현상을 경감시킬 수 있음이 확인되었다. 또한 음속노즐에 비하여 초음속노즐의 경우는 노즐출구와 가공면 사이의 사이거리가 절단면에서의 박리현상에 큰 영향을 미치지 않음이 관찰되었다.