• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2002.05a
• /
• pp.13-16
• /
• 2002

In this research, the design methods of the rocket joint parts were suggested. In the first section, nonlinear finite element analyses for joint parts of a composite pressure tank were performed. In the analyses, the detailed finite element modeling was performed and complex boundary conditions(contact problem, clamping force) were considered. Secondly, several guidelines for the design of joint parts were suggested. The parametric study for geometric design variables was peformed. Finally, the parametric study result was categorized for the multi-Joint part design of the axi-symmetric composite structure.

• Proceedings of the IEEK Conference
• /
• 2003.11c
• /
• pp.331-334
• /
• 2003

This letter presents the design and measured performance of bandpass filters based on a stacked-SIR (stepped impedance resonators) configuration with DGS (Defected Ground Structure). An unit DGS configuration is designed and analyzed to show the phase characteristic of proposed slow-wave structure. The SIR filter with DGS has been yielded better stop band and sharper skirt behavior than conventional bandpass filter.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.7
• /
• pp.644-652
• /
• 2004

In this paper, we designed a cascaded microstrip lowpass filter using the lowpass filters previously proposed. The previously proposed lowpass filters have a ultra-wide stopband and prominent cutoff sharpness using the combined characteristics of slot and microstrip open stub, respectively, and they are catagorized into 2 types by the method that determining their passband characteristics. The first type is determined its passband characteristics by open stub characteristics and the second is by slot characteristics. By cascading these structures with impedance adjustment of each element, the deeper out-of-band rejection and the sharper skirt response were achieved. The fabricated cascaded lowpass filters have -3㏈ cutoff frequencies at 1.035㎓ and 1.286㎓ respectively and -20㏈ stopband is over 20㎓ for both structures.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.9
• /
• pp.924-930
• /
• 2003

In this paper, a novel miniaturized microstrip duplexer with attenuation pole is proposed. A three-pole microstrip CT(Cascade Trisection) two bandpass filters have each asymmetrically prescribed transmission zero are design and fabrication. This CT bandpass filter changes coupling structure, which not only shifts the location of attenuation poles but also improves skirt characteristics. The duplexer results of measurement with the cross coupling CT bandpass filters has been yielded better isolation and sharper skirt behavior than that with a conventional bandpass filter. The results of measurement are almost similar to those of simulation results.

• Journal of the Korean Home Economics Association
• /
• v.48 no.2
• /
• pp.75-83
• /
• 2010

Hanbok Chima, a Korean skirt, with large-volume should have an archetypal drawing model for appropriate cultural and historical accuracy. In order to develop new Hanbok Chima archetypal drawings we drew a skirt by connecting height with a design structure adopted from Jeogori, a Korean jacket. As a result, an archetypal drawing was developed from which circumference of lower width of Chima, size of pleats in waist circumference, and length of Chima as well as a scheme of layering Chima and Jeogori can be obtained. In this drawing, width of Chima can increase or decrease naturally according to height. However, in case of same heights and different chest circumferences if 2.5cm of additional value is provided for every 5cm increase in chest circumference, Chima of any size can be made based on this drawing. In conclusion, given the demonstrated practicality of designing a Hanbok Chima with large-volume based on archetypal drawings, it is expected that the results of this study will provide useful scientific data for Korean costume designs.

• Journal of Navigation and Port Research
• /
• v.30 no.7
• /
• pp.607-610
• /
• 2006

A new compact microstrip low-pass filter and its equivalent-circuit model are developed. The philosophy of the structure behind this novel microstrip low-pass filter is simple as it is composed of a pair of symmetrical parallel coupled-line and an open-stub. With this configuration, a finite attenuation pole near the stopband cutoff frequency is available and adjustable by simply tuning the circuit parameters. Furthermore, the rejection bandwidth of this type of low-pass filter can be extended. In order to validate the feasibility of the proposed design method, a low-pass filter based on a microstrip structure is designed, fabricated, and measured. Experimental results agree very well with the simulation and analytical results.

• Journal of Advanced Research in Ocean Engineering
• /
• v.3 no.4
• /
• pp.184-192
• /
• 2017

The Korea Offshore Wind Power (KWOP) cooperation is planning to construct offshore wind energy farms with an overall rated power of 2.5 GW along the southwestern coast by 2019. Hitherto, various structural types of support structures for offshore wind turbines have been being proposed, but these structures have lacked economic analysis studies. Therefore, their economical superiority to existing types has been difficult to guarantee. An offshore structure with economic efficiency will have a minimum amount of mobilizing equipment and short offshore construction period because of the application of rapid installation methods. Thus, the development of a new support structure with economic efficiency is generally considered to be necessary. Accordingly, this paper proposes a newly developed and more economical jacket type for the offshore support structure. This study confirmed its structural safety and performance by conducting a structural analysis and eigenvalue analysis. The manufacturing and installation costs were then estimated. As a result, the new jacket type of offshore support structure proposed in this study significantly reduced the manufacturing and installation costs. Therefore, it is expected that the proposed jacket will contribute to reducing construction expenses for new wind power farms and invigorating wind power farm businesses.

• New & Renewable Energy
• /
• v.6 no.3
• /
• pp.47-54
• /
• 2010

Foundation plays an important role in the offshore wind turbine system. Different from conventional foundations, the suction caisson is proven to be economical and reliable. In this work, three-dimensional finite element method is used to check the suitability of suction caisson foundation. NREL 5MW wind turbine is chosen as a baseline model in our simulation. The maximum overturning moment and vertical load at the mudline are calculated using FAST and Bladed. Meanwhile the soil-structure interaction response from our simulation is also compared with the experiment data from Oxford university. The design parameter such as caisson length, diameter of skirt and spacing of multipod are investigated. Accordingly based on these parameters suggestions are given to use suction caisson foundations more efficiently.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.8
• /
• pp.878-883
• /
• 2008

In this paper, we propose a double rings structure to improve the balanced-port characteristics of Balun-Bandpass Filter(Balun-BPF). The conventional Balun-BPF has limitations on output symmetry and skirt steepness. We introduce a double rings structure and the suitable coupling point between the two ring resonators to solve these problems. The fabricated double rings Balun-BPF shows excellent characteristics as a Balun-BPF without the conventional limitations.

• Journal of Fashion Business
• /
• v.23 no.5
• /
• pp.19-30
• /
• 2019

The aim of this study is to analyze the stage of image change in Korean fashion design in regards to the simulacre of Jean Baudrillard. The changing phases of Korean fashion design are as follows: First, the initial stage involved simple imitation, which replicated the original as much as possible, it expressed the basic composition of Hanbok, flat cut and rich silhouette, the color scheme of traditional colors, traditional patterns, materials, and traditional ornaments. In the second stage, the subject matter intervened to distort and transform from the original, the basic composition and structure of the Hanbok were barely maintained, they were either removed or part of the structure modified or expressed using modern materials and patterns. The third stage, were based on reality but differed from reality through subject and imagination, and only left a part of the basic composition of Hanbok, and were expressed through the partial modification of the elements of the Hanbok, for instance the silhouette, skirt waist, collar and breast-tie. The fourth stage of pure simulacre, which refers to a new image with complete independence regardless of the reality. This stage differed from the basic structure and composition of Hanbok, and showcased traditional Korean image of Korea's unique cultural elements, such as hanbok or crafts and artworks, in a modern fashion with a modern sense and practicality.