• 한국의류학회지
• /
• 제27권7호
• /
• pp.770-777
• /
• 2003

This paper proposes a geometrical method for generating and draping the skirt 3D models. The method constructs a 3D basic skirt model using a truncated elliptical cone and generates the various skirt 3D models by controlling the elliptical cone. The B-Spline approximates the 3D drapes which change variously according to the angles and the textiles of the skirts. The mapping sources consist of the textile textures and the skirt 2D model. The 2D models are obtained by mapping the 3D skirt models to the 2D plane. The mapping sources allow us to map the textiles to the 3D skirts. We make the real skirts for the 6 kinds of angles and textiles. and investigate the data of their drape appearances. The investigated data are applied to the virtual skirts. Appearances of the virtual skirts are similar to those of the real.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(4)
• /
• pp.61-64
• /
• 2001

This paper proposes an automatic method for generating and 3D draping the skirt 3D models. The method constructs a 3D basic model of the skirts using elliptic cylinder and generates the various skirt 3D models by controlling the ellipses of the basic model. B-Spline approximates the wrinkles around the ellipse for the various 3D draping changing according to designs and textiles. We make some real skirts and investigate appearances for their drapes. This paper simulates their appearances and obtains good results. Furthermore, adaptation of the skirt 3D model to a personal character implements realistic coordination of the various skirts.

• KSTLE International Journal
• /
• 제3권1호
• /
• pp.1-6
• /
• 2002

The purpose of this paper is to investigate the effects of design parameters on the friction loss in piston skirt. An analytical model to describe the friction characteristics of piston skirt has been presented, which is based on the secondary motion of piston and mixed lubrication theory, It could be shown that the skirt friction closely depends on the side force acted on the piston pin. The side force is inf1uenced by cylinder pressure at low engine speed, but by inertia force at high engine speed. The usage of extensive skirt area and low weight piston is effective to reduce the friction loss at high speed. The low viscosity oil considerably decreases viscous friction as engine speed increases, but it increases boundary friction at low engine speed. From the parametric study, it is found that the skirt axial profile is the most important design parameter related to the reduction of skirt friction.

• 대한가정학회지
• /
• 제40권6호
• /
• pp.159-171
• /
• 2002

Today, many people seek for their own personal character which is distinguished from another people and they utilize fashion coordination as the was of expression their own image. In addition, interest in electronic commerce and cuber shopping mall on the internet is increasing. For this reason, visual and interesting virtual fashion coordination system is needed. The purpose of this study is to propose possibility of fashion coordination by virtual 3D model. For this study, 1. We make a 3D standard body model by automatic generation. 2. We make 3D fashion item (sleeveless top and flare skirt) by automatic generation. 3. We combine 3D body model with fashion item by special point, grouping and gap being between body and clothes. 4. We make textile palettes and textile DB for texture mapping and rendering. As a effect of this study, 1. It can give the chance to coordinate clothes suitable for their own character and bodyshape on the cuber space more speedily and variously. 2. It can help fashion internet shopping mall company can save a time, expenses and tries to advertise their new products, offer service for customers and lead customers to purchasing. 3. It can accumulate a database of design and textile for using by fashion and textile industry.

• 대한토목학회논문집
• /
• 제32권3C호
• /
• pp.105-111
• /
• 2012

해상 풍력발전기의 기초로 사용되는 버켓기초에는 수평하중과 모멘트가 크게 작용한다. 그러므로, 수평하중과 모멘트에 대한 지지력을 증가시키기 위해 3개의 단일 버켓기초를 묶은 Tripod 버켓기초가 적용되고 있다. 본 연구는 ABAQUS(2010) 해석을 수행하여 점토 지반에 근입된 Tripod 기초의 무리효과와 지지력을 분석하였다. 변수연구를 위해 버켓간 간격비 S/D(S=버켓과 타워중심간의 거리, D=버켓 직경)와 근입깊이비 L/D(L=버켓의 지반 근입깊이)를 변화시키며 해석을 수행하였다. 구성모델은 정규압밀 점토지반에 대해 Tresca 항복기준을 적용한 탄성-완전 소성 모델, 그리고 버켓기초에 대해 탄성모델을 적용하였다. 하중조건은 절점의 변위를 증가시키는 방법으로 연직, 수평 그리고 모멘트 하중을 재하하였다. 해석결과로부터, 단일 버켓기초와 Tripod 기초의 지지거동과 지지력을 비교한 후 단일 버켓의 지지력을 이용하여 Tripod 기초의 지지력을 산정하는 방법을 제안하였다.

• 한국의류학회지
• /
• 제29권11호
• /
• pp.1399-1409
• /
• 2005

The purpose of this study was to analyze the shape of gathered skirts using a three-dimensional measurement system. And in this experiment, I try to accumulate three-dimensional data of wearing model and to figure out analyzing method made by shape of clothes. The experimental design consists of two factorial designs. I set up three different kinds of fabrics, ratio of gathers. Therefore nine samples were made. The instrument and tools for three-dimensional measurement was whole body 3D scanner. Analysis program used in experiment is RapidForm 2004 PP1 and Pattern Design 2000. Data analysis utilizes SPSS WIN 10.0 Package. T-test to effect an inspection of evidence, there was difference about measurement times. One-way ANOVA to analysis effect of gather made by gathering conditions. The following results were obtained; 1. As a result of inspecting an error several times using a three-dimension measurement system, convinced data was obtained. 2. At front, distribution of gap amount was larger than back. And as ratio of gathers increased, distribution of gap amount showed regularly. 3. After analyzing horizontal sectional figure of skirts, as a height of skirt changed from waist to the bottom of skirts, the results showed as follows. While section width, section thickness, node width, node depth increased, node count decreased. 4. With the horizontal section levels of gather skirt, the silhouette on middle hip section was similar with the silhouette of body line. And as ratio of gathers around hip section increased, nodes showed regularly. At the bottom of skirts showed different nodes by different gathering condition.

• 한국의류학회지
• /
• 제33권2호
• /
• pp.266-275
• /
• 2009

Variations of individual hip shapes are a major obstacle in pattern making for fitness. The drafting method is used for pattern making in today's apparel industry. Whilst catering to a limited number of information such as waist and hip sizes, this method does not cater to variations in hip shape. This paper describes the analysis of hip shapes using 3D body model and tries to make sure the relationship between hip shape and pattern by calculating hip angle and dart amount. We achieved results in analyzing various hip shapes by extracting hip angle. Moreover, various hip shapes can be divided into three types(A, B and C) by the hip angle value($K_{sh}-K_{wsh}$). When we use computerized draping method to make a personalized pattern for a tigth skirt, we easily create complex dart lines automatically. Therefore we achieve the result of individual dart amount such as distance between dart lines and dart areas. C type of hip shape had short dart length, long distance between dart lines and a large amount of dart area. On the other hand, A type had long dart length, short distance between dart lines and small amount of dart area. B type had long length and long distance between dart lines and large amount of dart area. In traditional pattern making, distance between dart lines is usually proportional to amount of dart area because of similarity in dart line shape. In our pattern, there is no proportional relationship between dart line distance and dart area. This means that variations in hip shapes result in a wide variety of dart line curvature resulting in a wide range of dart area. By ensuring an accurate relationship between hip shape and pattern, it is possible to make patterns which result in clothing that not only fits well, but also exhibits other desirable properties.

• 한국의류학회지
• /
• 제30권11호
• /
• pp.1598-1607
• /
• 2006

The purpose of this study was to analyze the proportion of gathered skirts using a three-dimensional measurement system. And in this experiment, we have attempted to accumulate three-dimensional data of wearing model and find out adequate methods for analyzing shape of clothes. The experimental design consists of two factorial designs. We established three different kinds of fabrics, ratio of gathers. The measurement tool for three-dimensional model was whole body 3D scanner(Exima-WBS2H). Analysis program used in experiment is RapidForm 2004 PP1 and Pattern Design 2000. Data analysis utilizes SPSS WIN 10.0 Package. As the results show, there were different effect of gather and proportion of shapes among the measurements of width, thickness and areas made by different lines of vision in cross-sectional silhouette. And there were difference shapes of section area at each part of gathered skirts between vertical-outline silhouette and vortical-plane silhouette made by gathering conditions. And also the cross-sectional silhouettes and vertical silhouettes were related to shape of clothes.

• ETRI Journal
• /
• 제37권5호
• /
• pp.945-950
• /
• 2015

A novel microstrip low-pass filter is presented to achieve an ultra-wide stopband with 11 harmonic suppression and very sharp skirt characteristics. The filter is composed of a modified U-shaped resonator (which creates two fully adjustable transmission zeroes), a T-shaped resonator (which determines a cut-off frequency), and four radial stubs (which provide a wider stopband). The operating mechanism of the filter is investigated based on a proposed equivalent-circuit model, and the role of each section of the proposed filter in creating null points is theoretically discussed in detail. The presented filter with 3 dB cut-off frequency ($f_c=2.35GHz$) has been fabricated and measured. Results show that a relative stopband bandwidth of 164% (referred to as a 22 dB suppression) is obtained while achieving a high figure-of-merit of 15,221.

• Coupled systems mechanics
• /
• 제1권4호
• /
• pp.381-395
• /
• 2012

Dynamic response of Pile Supported Structures is highly depended on Soil Pile Structure Interaction. In this paper, by comparison of experimental and numerical dynamic responses of a prototype jacket offshore platform for both hinge based and pile supported boundary conditions, effect of soil-pile-structure interaction on dynamic characteristics of this platform is studied. Jacket and deck of a prototype platform is installed on a hinge-based case first and then platform is installed on eight skirt piles embedded on continuum monolayer sand. Dynamic characteristics of platform in term of natural frequencies, mode shapes and modal damping are compared for both cases. Effects of adding and removing vertical bracing members in top bay of jacket on dynamic characteristics of platform for both boundary conditions are also studied. Numerical simulation of responses for the studied platform is also performed for both mentioned cases using capability of ABAQUS and SACS software. The 3D model using ABAQUS software is created using solid elements for soil and beam elements for jacket, deck and pile members. Mohr-Coulomb failure criterion and pile-soil interface element are used for considering nonlinear pile soil structure interaction. Simplified modeling of soil-pile-structure interaction effect is also studied using SACS software. It is observed that dynamic characteristics of the system changes significantly due to soil-pile-structure interaction. Meanwhile, both of complex and simplified (ABAQUS and SACS, respectively) models can predict this effect accurately for such platforms subjected to dynamic loading in small range of deformation.