• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2002년도 추계학술대회 논문집
• /
• pp.117-120
• /
• 2002

An experimental research has been carried out for flow control of the shock wave/turbulent boundary-layer interaction utilizing aeroelastic mesoflaps. Various shapes and thicknesses of the mesoflap are tested to achieve different deflections of the flap, and ail the results are compared to the solid-wall reference case without flow-control mechanism. Quantitative variation of skin friction has been measured downstream of the interactions using the laser interferometer skin friction meter, and qualitative skin friction distribution has been obtained by observing the interference fringe pattern on the oil-film surface. A strong spanwise variation in the fringe patterns with a narrow region of separation near the centerline is noticed to form behind the shock structure, which phenomenon is presumed partially related to three-dimensional flow structures associated with both the sidewalls and the bottom test surface. The effect of the shape of the cavity is also observed and it is noticed that the shape of the cavity is not negligible.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1268-1271
• /
• 2005

This paper proposes a compact-sized surface myoelectric sensor for myoelectric hand prosthesis. To fit the surface myoelectric sensor in the socket of the myoelectric hand prosthesis, the sensor should be a compact size. The surface myoelectric sensor is composed of a skin interface and a single processing circuit that are mounted on a single package. Since the skin interface has one reference and two input electrodes, and the reference electrode is located in middle of two input electrodes, we propose two types of sensors with the circle- and bar-shaped reference electrode, but all input electrodes are the bar-shaped. The metal material used for the electrodes is the stainless steel (SUS440) that endures sweat and wet conditions. Considering conduction velocity and median frequency of the myoelectric signal, we select the inter-electrode distance (IED) between two input electrodes as 18mm, 20mm, and 22 mm. The signal processing circuit consists of a differential amplifier with band pass filter, a band rejection filter for rejecting 60Hz power-line noise, amplifiers, and a mean absolute value circuit. We evaluate the proposed sensor from the output characteristics according to the IED and the shape of the reference electrode. From the experimental results we show the surface myoelectric sensor with the 18mm IED and the bar-shaped reference electrode is suitable for the myoelectric hand prosthesis.

• 한국식품과학회지
• /
• 제27권1호
• /
• pp.1-5
• /
• 1995

본 연구에서는 국내산(A) 및 수입산(B) 소세지를 택하여 소세지의 텍스처 프로필을 수행하였다. 패널요원들은 두 제품에 대하여 감지되는 순서에 따라 14개의 관능적 특성용어를 개발하였다. 개발된 특성용어는 표면의 촉촉함, 표면의 매끄러움, 탄성, 내부경도, 껍질이 질긴 정도, 응집성, 조밀도, 씹음수, 수분방출, 덩어리 응집성, 덩어리상, 과립상, 껍질의 분리도, 기름짐이었다. 또한 $0{\sim}3$점을 8구간으로 나눈 척도와 특성의 객관적인 평가를 위하여 표준시료를 사용하는 표준척도를 확립하였다. 소세지 A는 탄성, 표면의 매끄러움, 내부경도, 껍질이 질긴 정도, 조밀도, 씹음수, 덩어리상 및 껍질의 분리도에서 소세지 B보다 높은 강도값을 나타내었다. 표면의 촉촉함, 응집성, 수분방출, 덩어리 응집성, 과립상같은 특성들에 있어서는 소세지 B가 소세지 A보다 더 높은 값을 나타내었다. 기름짐에 있어서는 소세지 B가 크게 평가되었으나 소세지 A보다 더 담백한 맛이라는 의견이 제시되었다.

• 대한화장품학회:학술대회논문집
• /
• 대한화장품학회 2003년도 IFSCC Conference Proceeding Book II
• /
• pp.218-218
• /
• 2003

Recently we showed the prototype portable device for the determination of human skin moisture by using near infrared spectroscopy. In order to optimize the acquiring condition of NIR spectrum of skin and control the target information of water depending the site such as epidermis and dermis, skin depth profiling was investigated changing the distance between illuminations and receiving of radiation in the terminal of fiber probe. The colleted light information could be controlled by changing the distance of the fiber optic probes. It was confirmed that the longer distance we used, the deeper site from the skin surface we could get information from in this study. Four kinds of probes with distances such as 0.03 mm, 0.1 mm, 0.5 mm, and 1.0 mm were used. In addition, the gap size from 0.3 mm to 3.0 mm was studied to control the intensity of water absorbance effectively and to avoid saturation of water absorption. We also investigated the reference materials depending the reflectance ratio for water absorption not to be saturated because of the strong absorptivity of water. Furthermore, spectroscopic information regarding free water and bound water around 1850 nm was investigated by using the different distance of fiber optic probes. This study would be great help to control the spectroscopic information of water to be measured depending the site where water exists.

• ETRI Journal
• /
• 제28권6호
• /
• pp.770-776
• /
• 2006

This paper presents a hyperspectral imaging technique based on laser-induced fluorescence for non-invasive detection of tumorous tissue on mouse skin. Hyperspectral imaging sensors collect image data in a number of narrow, adjacent spectral bands. Such high-resolution measurement of spectral information reveals contiguous emission spectra at each image pixel useful for the characterization of constituent materials. The hyperspectral image data used in this study are fluorescence images of mouse skin consisting of 21 spectral bands in the visible spectrum of the wavelengths ranging from 440 nm to 640 nm. Fluorescence signal is measured with the use of laser excitation at 337 nm. An acousto-optic tunable filter (AOTF) is used to capture images at 10 nm intervals. All spectral band images are spatially registered with the reference band image at 490 nm to obtain exact pixel correspondences by compensating the spatial offsets caused by the refraction differences in AOTF at different wavelengths during the image capture procedure. The unique fluorescence spectral signatures demonstrate a good separation to differentiate malignant tumors from normal tissues for rapid detection of skin cancers without biopsy.

• Advances in biomechanics and applications
• /
• 제1권4호
• /
• pp.269-277
• /
• 2014

In skin-marker based motion analysis, knee translation measurement is highly dependent on a pre-selected reference point (functional center) on each segment determined by the location of anatomical landmarks. However, the placement of skin markers on palpable anatomical landmarks (i.e., femoral epicondyles) has limited reproducibility. Thus, it produces large variances in knee translation measurement among different subjects, as well as across studies. In order improve the repeatability of knee translation measurement, in this study an optimization method was introduced, by which the femoral functional center was numerically determined. At that point the knee anteroposterior translation during the stance phase of walking was minimized. This new method was tested on 30 healthy subjects during walking in gait lab with motion capture system. Using this new method, the impact of skin marker position (at anatomical landmarks) on the knee translation measurement has been minimized. In addition, the ranges of anteroposterior knee translations during stance phase were significantly (p<0.001) smaller than those measured by conventional method which relies on a pre-selected functional center ($11.1{\pm}3.5mm$ vs. $19.9{\pm}5.5mm$). The results of anteroposterior translation using this new method were very close to a previously reported knee translation (12.4 mm) from dual fluoroscopic imaging technique. Moreover, this new method increased the reproducibility of knee translation measurement by 50%.

• 한국산학기술학회논문지
• /
• 제17권1호
• /
• pp.421-424
• /
• 2016

본 연구에서 남해안산 전복으로 부터 얻어진 일반 열수 전복 추출물과 발효추출물의 화장품 원료로서의 사용가능성을 평가하고자 기본적인 피부 안전성 시험으로 추물물과 이를 이용한 액정크림 제형에서의 피부 일차 첩포 테스트를 수행하였다. 비교군으로 정제수, 1,3-부틸렌글리콜, 액정크림으로 하였고 시료군은 전복추출물과 전복추출물을 함유한 액정크림 제형이었다. 피부 일차 첩포 테스트 결과, 비교군과 시료군 모두 피부의 자극이 없는 것으로 나타났다. 그러므로 전복 추출물이 화장품 원료로서 피부 안전성을 확인하였다.

• Nuclear Engineering and Technology
• /
• 제51권3호
• /
• pp.843-852
• /
• 2019

In the present study, we established a comprehensive dataset of dose coefficients (DCs) of the new meshtype ICRP reference computational phantoms (MRCPs) for idealized external exposures of photons and electrons with the Geant4 code. Subsequently, the DCs for the nine organs/tissues, calculated for their thin radiosensitive target regions, were compared with the values calculated by averaging the absorbed doses over the entire organ/tissue regions to observe the influence of the thin sensitive regions on dose calculations. The result showed that the influences for both photons and electrons were generally insignificant for the majority of organs/tissues, but very large for the skin and eye lens, especially for electrons. Furthermore, the large influence for the skin eventually affected the effective dose calculations for electrons. The DCs of the MRCPs also were compared with the current ICRP-116 values produced with the current ICRP-110 reference phantoms. The result showed that the DCs for the majority of organs/ tissues and effective dose were generally similar to the ICRP-116 values for photons, except for very low energies; however, for electrons, significant differences from the ICRP-116 values were found in the DCs, particularly for superficial organs/tissues and skeletal tissues, and also for effective dose.

• 한국산업보건학회지
• /
• 제30권1호
• /
• pp.39-49
• /
• 2020

Objectives: We investigated the status of accidents and deaths caused by chemical leakage and skin contact in Korea. The purpose of this study was to produce and provide technical reference data for the efficient management of accidents and the rational management of accidental chemicals. Methods: Accidents and deaths caused by chemical leakage and skin contact in industry were investigated. Based on 68 accident reports related to chemical leakage and skin contact, the causes of accidental deaths were analyzed. In addition, we investigated the chemical substances and articles that caused these accidents and deaths. Based on the results of the investigation, the causes of accidents caused by chemical leakage and skin contact were identified and practical management measures for the chemicals were suggested. Results and Conclusions: In 2018, 372 people suffered from chemical leaks and skin contact, up by 123 (about 49.4%) from the previous year. The number of accident deaths was 14, an increase of five (about 55.6%) from the previous year. In the last three years (2016-2018), 91 chemical substances and article groups were involved in accidents caused by chemical leakage and skin contact. There were 16 chemical substance and article groups involved in accidental deaths. There were ten cases of accidents involving two or more casualties due to chemical leakage and skin contact, and 23 deaths occurred. Most of these accidental deaths were caused by subcontractor workers outsourcing risks. Therefore, there is an apparent need to strengthen the responsibility for safety and health among subcontractors.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.1194-1197
• /
• 2004

High temporal-resolution and accurate measurement of skin impedance locus provides useful data for the identification of the physiological/psychological changes and also the identification of acupuncture point. An impedance spectroscopy method using digitally constructed current waveform consisting of many frequency components (multiples of 1Hz) was reported3. The time resolution of the method depends on the lowest frequency used in the waveform construction, and therefore, the measurement would be faster if the lowest frequency is the higher. However, it was not clear that how many and how low frequencies must be used for the estimation of the skin impedance parameters from which the impedance locus can be drawn. This study shows the relationship between the estimation error of the impedance parameters and the frequency coverage of the spectroscopy. The results of this study are expected to serve as the reference of the frequency selection in the impedance spectroscopy.