• 셀메드
• /
• 제11권1호
• /
• pp.4.1-4.8
• /
• 2021

Background: The Unani system of medicine has been practised since centuries for the treatment of a range of diseases. In spite of their efficacy they have been widely criticised due to the lack of standardization and poor quality control. Standardization of Unani medicine is a valuable issue at the present because they are very prone to contamination, deterioration, adulteration and variation in composition due to biodiversity as well as careless collection. Objective: To Standardize and Development of HPTLC Fingerprinting of a polyherbal Unani formulation Qurs-e-Safa. Materials and methods: The conventional and modern analytical techniques were used to standardise Qurs-e-Safa. The study was carried into three different batches of Qurs-e-Safa prepared with its ingredients. The parameters studied are organoleptic, microscopic, physicochemical parameters, phytochemical screening, TLC, HPTLC profile, aflatoxin, microbial load and heavy metal analysis. Results and conclusion: Qurṣ-e-Sa'fa is dark yellow in colour and aromatic smell. Uniformity of diameter and weight variation were found to be 13 ± 0, and 524.7 ± 1.72 mg. friability, hardness and disintegration time of all 3 batches were found to be (0.0615 ± 0.004, 0.0885 ± 0.0047 and 0.0725 ± 0.0058), (3.5 ± 0.2886, 3.67 ± 0.1674 and 3.67 ± 0.1674) and (16 to 17 minutes). Extractive value were found to be maximum in distilled water (38.488 ± 0.20, 37.3824 ± 0.38 and 39.8177 ± 0.13) followed by alcohol (27.5406 ± 0.54, 27.5656 ± 0.32 and 26.9229 ± 0.25). Loss of weight on drying, pH, total ash, acid insoluble ash, qualitative test was set in. Phytochemical screening revealed the presence of Carbohydrates, Phenols, Resins, Proteins, Steroids, fixed oil and Flavonoids. The microbial load was found absent and heavy metals were within permissible limits. The data evolved from the study may serve as a reference to validate and also help in the quality control of other finished products in future research.

• Journal of Nutrition and Health
• /
• 제56권6호
• /
• pp.615-628
• /
• 2023

국내 미세먼지의 증가는 만성 호흡기 질환과 피부 염증 및 노화를 유발하여 국민 전체의 건강을 위협하는 심각한 문제로 대두되었다. 본 연구는 미세먼지 유발 피부 염증과 노화에 대해 식용곤충인 쌍별귀뚜라미 70% 에탄올 추출물 (AE-GBE)의 미세먼지에 대한 활성산소 소거능, 세포내 β-galactosidase 효소 활성, MMP-1 발현, 콜라겐 생성, 그리고 염증성 반응에 대해 알아보았다. AE-GBE는 HDF 세포에서 ERM-CZ100에 의해 유도될 수 있는 활성산소종, DNA 단편화 수준 및 β-galactosidase 활성을 유의하게 감소시켰다. 또한 IL-1β, IL-6, TNF-α와 같은 전염증성 사이토카인의 생성과 이들 사이토카인에 의해 발현되는 것으로 알려진 COX2 단백질의 발현을 현저히 감소시켰으며, MMP-1을 억제하여 콜라겐 분해를 막았다. 따라서 본 연구결과는 쌍별귀뚜라미 추출물이 미세먼지 유발 피부 염증에 대한 잠재적인 치료 표적이 될 수 있으며 더 나아가 피부 노화를 늦추는 데 긍정적인 효과를 가질 수 있음을 시사한다.

• 대한의용생체공학회:의공학회지
• /
• 제22권5호
• /
• pp.459-468
• /
• 2001

Average Coordinate Reference System (ACRS) 방법은 인체 보행 분석 시 발생하는 실험오타를 줄이기 위해서 개발되었다. 실험적으로 측정되어지는 운동학 데이터가 인체 모델링 분석을 수행하기 위해서 사용되어지며. 그 모델의 정확성은 그 측정된 데이터에 직접적인 연관 관계가 있다. 그러나, 인체가 보행하는 동안에 피부의 움직임과 골격구조의 변형이 발생하고 또한 운동 분석 실험장비 자체가 가지고 있는 여러 가지의 한계 때문에. 그 실험 데이터에 정확도는 의문시되어 진다 개발된 ACRS 방법은. 인체 운동분석을 수행하는 여러 종류의 시스템에 적용할 수 있는데. 본 연구에서는 ACRS 방법을 광학적으로 추적이 되는 표적을 인체의 각 세그멘트에 붙인 시스템에 적용하였다 ACRS 방법에서는. 각 세그멘트에 붙어있는 각각의 표적들이 독립적으로 그 세그멘트 안에서 국부좌표계의 원점으로 취급되어질 수 있다. 실험 과정에서 발생하는 본래부터의 오타 때문에. 각 원점에서 계산된 Euler angle은 서로 상이한 값을 갖는다 실험 초기에 측정한 보정 세그멘트 기준 프레임의 지식을 이용하면, 각 표적 위치에서 계산된 Euler angles들의 평균값을 계산할수 있고, 그 평균값은 피부의 확장과 회전의 영향을 최소화한 값이다. 운동분석에 일반적으로 적응되는 Euler angle 방법과 개발된 ACRS 방법을 비교하여 보면. ACRS 방법을 사용하였을 때 오차가 줄어들었다 만약에, 보행 실험 데이터에 오타가 존재하지 않는다면, 절대좌표계를 사용한 무릎 관절의 분리와 관통된 거리는 일회 보행구간 동안에 제로가 될 것으로 생각된다. 일반적으로 적용되는 Euler angle 방법을 적용하였을 때, 분리와 관통된 거리는 약 18 mm 가지 분포가 되었고, 개발된 ACRS 방법을 사용하였을 시에는 약 12 mm 까지 분포가 되었다.

• 한국지반신소재학회논문집
• /
• 제18권1호
• /
• pp.39-53
• /
• 2019

현장에서의 양방향재하시험은 극한지지력을 판단할 수 있는 하중재하 단계까지의 재하시험이 실시되지 않기 때문에 항복하중 및 극한하중을 정확하게 알 수 없는 문제점이 있다. 그리고 정적압축재하시험과 달리 주면과 선단이 분리되어 하중이 전이되고, 주면부의 하중재하 방향이 반대이기 때문에 실제 말뚝의 거동과 다른 결과를 나타낼 우려가 있다. 따라서 본 연구에서는 대구경 현장타설말뚝인 바렛말뚝의 현장 양방향재하시험 결과로부터 3차원 유한요소해석을 실시하고, 재산정된 설계정수를 정적압축재하시험의 3차원 유한요소해석에 적용하여 수치해석을 실시하였으며, 그 결과로부터 현장타설말뚝의 실제 거동을 추정하는 방법을 제안하였다. 먼저, 현장타설말뚝의 현장 양방향재하시험 결과를 이용하여, 상 하향으로의 하중재하에 따른 하중-변위 분석을 실시하였다. 그리고 양방향재하시험을 3차원 유한요소해석을 통해 모사하고 역해석을 실시하여 재산정된 설계정수들을 정적압축재하시험의 3차원 유한요소해석에 적용하였으며, 이 결과로부터 양방향재하시험을 통한 정적압축재하시험의 거동을 분석하였다. 양방향재하시험을 통한 정적압축재하시험의 3차원 유한요소해석 결과를 {정적압축재하시험과 양방향재하시험의 지지력 비(y)} ~ {기준침하량과 말뚝주면장 비(x)}의 관계식으로 나타내었고, 10.0mm, 15.0 mm, 25.4mm일 때의 기준침하량에 따라 각각 구분하여 제안하였다.

• Parasites, Hosts and Diseases
• /
• 제47권3호
• /
• pp.213-218
• /
• 2009

Leishmaniasis is a neglected disease and endemic in developing countries. A lack of adequate and definitive chemotherapeutic agents to fight against this infection has led to the investigation of numerous compounds. The aim of this study was to investigate the effect of RT-01, an organotellurane compound presenting biological activities, in 2 experimental systems against Leishmania amazonensis. The in vitro system consisted of promastigotes and amastigotes forms of the parasite, and the in vivo system consisted of L.amazonensis infected BALB/c mice, an extremely susceptible mouse strain. The compound proved to be toxic against promastigotes and amastigotes. The study also showed that treatment with RT-01 produces an effect similar to that treatment with the reference antimonial drug, Glucantime, in L.amazonensis infected mice. The best results were obtained following RT-01 intralesional administration (720 ${\mu}g$/kg/day); mice showed significant delay in the development of cutaneous lesions and decreased numbers of parasites obtained from the lesions. Significant differences in tissue pathology consisted mainly of no expressive accumulation of inflammatory cells and wellpreserved structures in the skin tissue of RT-01-treated mice compared with expressive infiltration of infected cells replacing the skin tissue in lesions of untreated mice. These findings highlight the fact that the apparent potency of organotellurane compounds, together with their relatively simple structure, may represent a new avenue for the development of novel drugs to combat parasitic diseases.

• The Korean Journal of Pain
• /
• 제23권1호
• /
• pp.11-17
• /
• 2010

Background: The target of lumbar sympathetic ganglion block is the anterolateral surface of the L2, 3 and 4 vertebral bodies, where the lumbar sympathetic ganglion usually lies. In most cases, a block-needle is inserted approximately 5-8 cm lateral to spinous process on the skin and directed to the anterolateral surface of vertebral body obliquely. The purpose of this study is to determine the safe entry angle and entry point in Korean by using the abdominal CT scan images. Methods: The abdominal CT images of eighty five patients were recruited to this study. The minimal angle aimed at the lumbar sympathetic ganglion that can pass through the lateral aspect of body and maximal angle that avoids puncturing the kidney, ureter or retroperitoneal space were measured. The distance from midline to skin entry point was also measured. Results: There was no significant difference in entry angle among L2, 3, and 4 level. The entry angle was similar in the right and left side, and in males and females. The entry angle of old age group was significantly smaller than that of young age group. The calculated safe entry angle was $30.5{\pm}0.4^{\circ}$ and entry point was $7.7{\pm}0.2\;cm$ and $6.7{\pm}0.1\;cm$ lateral from midline in males and females respectively. Conclusions: These measurements can be used as a reference for lumbar sympathetic ganglion block and radiofrequency lesioning. Prior to performing the lumbar sympathetic ganglion block for cancer patients, the abdominal CT scan should be reviewed to prevent complications.

• Journal of Microbiology and Biotechnology
• /
• 제20권2호
• /
• pp.311-318
• /
• 2010

Antimicrobial finishing of textiles has been found to be an economical way to prevent (or treat) skin disorders. Hence, this research effort was aimed at elucidating the relationship between the molecular weight (MW) of chitosan and its antimicrobial activity upon six dermal reference microorganisms, as well as the influence of the interactions with cotton fabrics on said activity. Using 3 chitosans with different MWs, as well as two chitooligosaccharide (COS) mixtures, a relevant antimicrobial effect was observed by 24 h for the six microorganisms tested; it was apparent that the antimicrobial effect is strongly dependent on the type of target microorganism and on the MW of chitosan - being higher for lower MW in the case of E. coli, K. pneumoniae, and P. aeruginosa, and the reverse in the case of both Gram-positive bacteria. Furthermore, a strong antifungal effect was detectable upon C. albicans, resembling the action over Gram-positive bacteria. Interactions with cotton fabric resulted in a loss of COS activity when compared with cultured media, relative to the effect over Gram-negative bacteria. However, no significant differences for the efficacy of all the 5 compounds were observed by 4 h. The three chitosans possessed a higher antimicrobial activity when impregnated onto the fabric, and presented a similar effect on both Gram-positive bacteria and yeast, in either matrix. Pseudomonas aeruginosa showed to be the most resistant microorganism to all five compounds.

• 대한방사선기술학회지:방사선기술과학
• /
• 제43권1호
• /
• pp.9-14
• /
• 2020

Commercial plate bolus is generally used for treatment of surface tumor and required surface dose. We fabricated 3D-printed bolus by using 3D printing technology and usability of 3D-printed bolus was evaluated. RT-structure of contoured plate bolus in the TPS was exported to DICOM files and converted to STL file by using converting program. The 3D-printed bolus was manufactured with rubber-like translucent materials using a 3D printer. The dose distribution calculated in the TPS and compared the characteristics of the plate bolus and the 3D printed bolus. The absolute dose was measured inserting an ion chamber to the depth of 5 cm and 10 cm from the surface of the blue water phantom. HU and ED were measured to compare the material characteristics. 100% dose was distributed at Dmax of 1.5 cm below the surface when was applied without bolus. When the plate bolus and 3D-plate bolus were applied, dose distributed at 0.9 cm and 0.8 cm below the surface of the bolus. After the comparative analysis of the radiation dose at the reference depth, differences in radiation dose of 0.1 ~ 0.3% were found, but there was no difference dose. The usability of the 3D-printed bolus was thus confirmed and it is considered that the 3D-printed bolus can be applied in radiation therapy.

• 한국항행학회논문지
• /
• 제15권4호
• /
• pp.672-679
• /
• 2011

본 논문에서는 텔레비전 칼라영상에서 사람의 피부색을 기반으로 얼굴영역을 검출하는 방법을 제안하였다. 제안된 방법은 피부색을 샘플링하여 기준영상으로 놓고, 텔레비전 영상의 화소와 기준영상의 화소 사이의 유클리디안(Euclidean) 거리를 이용하여 얼굴후보 영역결정을 하였다. 얼굴 후보영역에서 눈 검출은 RGB 칼라를 CMY칼라 모델로 변환 하여 Y와 C 사이의 색차성분에 대한 평균값과 표준 편차를 이용하여 검출 하였다. 입술 영역은 RGB 칼라모델에서 YIQ 칼라 공간으로 변환 하여 Q 요소로 입술 영상을 검출 하였다. 얼굴영역 검출은 눈 영상과 입술 영상을 논리연산 하여 지식 기반으로 결정 하였다. 제안된 방법의 타당성을 입증하기 위하여 텔레비전 칼라영상에서 입력받은 정면 칼라 영상으로 실험한 결과, 얼굴영역 검출이 얼굴의 위치와 크기에 관계없이 검출됨을 보였다.

• Archives of Plastic Surgery
• /
• 제42권6호
• /
• pp.769-775
• /
• 2015

Background The radial forearm flap is a versatile, widely used flap. However, the possibility of donor site complications has led to concern over its use. Some surgeons prefer using other flaps whose donor sites can be closed primarily with less morbidity, including avoiding unpleasant scarring. However, in our experience, donor site stability of the radial forearm flap can be reliably achieved by using well-implemented specific procedures. Here, we present a collection of donor site cases of the radial forearm flap and investigate factors that affect the aesthetic results as the basis for a reference for selecting a radial forearm flap. Methods In this retrospective study, we reviewed 171 cases in which a radial forearm flap was used for free tissue transfer after resecting head and neck cancer. We focused on donor site morbidity rates. Each operation involved a detailed procedure designed to minimize donor site morbidity. Moreover, statistical investigations were conducted for 22 cases to determine factors affecting the scar appearance. Results Only one case developed total skin graft necrosis as a major complication. Scar-related aesthetic results were acceptable, and the body-mass index, body weight, diabetes, and cardiac problems were significant factors related to the appearance of scars. Conclusions Performing the radial forearm flap using a well-implemented detailed technique helps achieve acceptable donor site morbidity results. The aesthetic results were more promising for patients without excess body weight, diabetes, or cardiac problems. Therefore, anxiety about donor site morbidity should not be a reason to avoid selecting the radial forearm flap in suitable patients.