• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.5 no.1
• /
• pp.5-10
• /
• 1994

In vivo canine model was made in two mongrel dogs under the general Ⅰ-Ⅴ anesthesia. A vertical skin incision was made on the neck, the larynx and the trachea were dissected. Two tracheal openings were made : lower one for the insertion of the anesthesia tube and upper one for the delivery of air to the larynx to induce phonation. External branch of the superior laryngeal nerves and recurrent laryngeal nerves bilaterally were identified and stimulated electrically constantly. Subglottic pressure. fundamental frequency, intensity, and open quotient were measured when the air flow rate was varying low, medium and high. Glottic resistence was calculated. As the air flow rate was increased, the subglottic pressure and the sound intensity were increased. However, glottic resistance was decreased as the air flow was increased. In falsetto register, fundamenatal frequency was increased with the increment of air flow, but in modal register fundamental frequency was not increased statistically significant Open quotient by the electroglottography was increased according to the increment of airflow.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.9
• /
• pp.3599-3609
• /
• 2010

Recently, the construction of coastal structures and high-rise structures against the horizontal and uplift forces increases with the developing the coastal developments. Especially the application of belled tension pile as foundation type to effectively resist uplift force is increasing in coastal structures. However, research on pullout resistance of belled tension pile has been limited and not yet been fully performed. Therefore, the pullout load tests of belled tension piles in four overseas sites were performed, then the bearing capacity, characteristics on load-displacement of piles and load distribution considering skin friction were investigated in this paper. In addition, the limit pullout bearing capacity calculated by the three-dimensional finite element analysis and theoretical methods were compared with values of in-situ test.

• Proceedings of the Botanical Society of Korea Conference
• /
• 1995.07a
• /
• pp.133-170
• /
• 1995

The major objectives of fruit breeding lie in improvement of cultivar, easy to be cultivated and of high quality, in order to produce unexpensive, delicious fruit both for fresh fruit market and processing. Recently, fruit breeding in Korea has contributed to breeding of several superior cultivars in major fruit crops, resulting in appreciable improvement in qualities such as skin color, taste and fruit-bearing habit concerned with productivity. In spite of accomplishments mentioned above, the need for both highly disease-resistant cultivars and long-keeping, physiological disorder-resistant cultivars to meet long distance transsportation in the temperate fruit crops of apples, oriental pears, stone fruits such as peaches, and grapes grown in Korea is rapidly pressing more than ever, as cultivars of today susceptible to pests and diseases and vulnerable to physiological disorders are very expensive and time-consuming in post-harvest handling and management. Thus, imporvements made in the above problems through breeding level will lead to the really enhanced productivity in fruit industry. The major impediments of tree size, the long length of juvenile period and the highly heterogeneous genetic composition to the improvement of fruit crops are responsible for the lower amount and rate of improvements of fruit crops as compared to annuals. Considering the expected limitations of the above problems to be solved through conventional breeding methods and strategy, a turning point of breeding a near perfect cultivar would be laid down if innovative breakthroughs in biological technology will be realized in applying some of the techniques of genetic manipulation at the molecular level to the cultivar improvement of fruit crops, such as the selective insertion of DNA carrying genes that govern desirable characteristics. More than anything else, those traits such as fruiting habit deciding productivity, elements of fruit qualities conditioned by monogene, and disease-and pest-resistance of vital importance for successful fruit growing are urgently desired to be improved by advancement of biotechnology for they are more than difficult and need long period to be attained through conventional breeding method.

• Clinical and Experimental Pediatrics
• /
• v.48 no.1
• /
• pp.88-92
• /
• 2005

Pyomysitis is a primary acute bacterial infection of large skeletal muscule, usually occuring in the absence of specific cause of infection. Pyomyositis has been reported mainly in tropical countries and was rare in temperate climates. but it has been recognized with increasing frequency. Toxic shock syndrome(TSS) is an acute mutisystemic disease characterized by high fever, hypotension, multisystem dysfunction and erythematous rash followed by skin desquamation 8-12 days after onset. Especially, TSS and pyomyositis are rare conditions in the pediatric population. We experienced one case in a healthy 13-year-girl who developed pyomyositis of the right ileac and gluteal muscles associated with TSS caused by methicillin resistant Staphylococcus aureus. We reports a case of acute pyomyositis with TSS, in which the diagnosis was difficult because of the relative rare incidence in temperate climates and its vague symptoms. To our knowledge, this is the first reported case of pyomyositis with TSS in Korean pediatric population.

• Geotechnical Engineering
• /
• v.9 no.3
• /
• pp.23-34
• /
• 1993

Model pile teats, using large calibration chamber in which the stress state and the relative density can be controlled, were performed in order to study on the effect of soil condition on the behavior of open-ended steel pipe pile. The model pipe pile was made up of two pipes to separately measure each component of bearing capacity of open -ended steel pipe pile. According to the tests results, pile plugging and driving resistance of the pile installed in sand were primarily dependent on the horizontal stress and the relative density. Plug bearing capacity, outside skin fricition and total bearing capacity were also mainly dependent on the horizontal stress and relative density. Moreover, the ratio of the horizontal stress acting on the outside wall of open -ended pipe pile after installation to the original horizontal stress was not nearly affected by original value of horizontal stress. It is bigger than one in the case of dense deposit, equal to one for medium deposit, and smaller than one for very loose deposit. It seems to be mainly dependent on the relative density for a given soil.

• Journal of the Korean Geotechnical Society
• /
• v.16 no.1
• /
• pp.107-116
• /
• 2000

Dynamic and static load tests are conducted in four construction sites by using steel pipe piles(SPP) and concrete piles to compare differences of load bearing mechanism. Steel pipe piles are instrumented with electric strain gages and are subject to dynamic load tests during driving. The damage of strain gages attached is checked simultaneously. Static load test is also conducted on the same piles after two to seven days' elapse. Then load-settlement behavior and shaft and/or tip resistances are measured. As a result, the allowable bearing capacity calculated by the Davisson's offset method of CAPWAP analysis shows 2~33% larger than that of static load test. The average value of allowable bearing capacity of static load test is closer to the allowable capacity obtained at the safety factor of 2.5 applied on ultimate bearing capacity than to the one obtained from the Davisson's offset method. The analysis of strain gage readings shows that unit skin friction increases with depth. Furthermore, the friction mobilized around the 1~2m above the pile tip considerably contributes to the total shaft resistance.

• Journal of the Korean Magnetics Society
• /
• v.12 no.3
• /
• pp.109-116
• /
• 2002

We designed the flyback planar transformer, which had 8 W capacity, with 70 V input voltage and 8.2 V output voltage for the establishment of design method and the confirmation of application possibility. The numerical value of inductance measured under the switching frequency of 120 kHz was 1650 $\mu$H, which was the inductance efficiency of'85∼87% against theoretical value. The A.C. resistance of primary and secondary coil was 4.2 Ω and 0.25 Ω respectively, On the other hand, the quality factor for each wound numbers showed quite a high value of 158 and 75 respectively. And the Coupling Factor was 0.96∼0.97 under 120 kHz switching frequency. The inductance rapidly increased as the thickness of the core plane increased until it became 1.4 mm but under the thickness more than 1.4 mm, there was no substantial change. Therefore, the critical value of the plane thickness of core was 1.4 mm. And the shape of the output wave of the planar transformer at 70V input voltage was a stable square wave.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.27 no.1
• /
• pp.17-27
• /
• 2001

A cell-based assay system for monitoring NF-$textsc{k}$B activity was developed to determine the influence of activated NF-$textsc{k}$B in human HaCaT cells. The pNF-$textsc{k}$B-SEAP-NPT plasmid that permits expression of the secreted alkaline phosphatase (SEAP) reported gene in response to the NF-$textsc{k}$B activity and contains neomycin phosphotransferase (NPT) gene for the geneticin resistance in host cells was constructed and transfected into human keratinocyte cell line HaCaT. Human HaCaT transfectant cells secreted the SEAP enzyme into the culture medium in a time-dependent manner until 72h. NF-$textsc{k}$B activities were measured in the SEAP reporter gene assay using a fluorescent detection method. The treatment of HaCaT cell transfectants with known antioxidants [e.g., N-acetyl-L-cysteine and vitamin C] showed inhibition of NF-$textsc{k}$B activity in a time-and concentration-dependent manner. The phorbol 12-myristate 13-acetate (PMA) known as a stimulator of NF-$textsc{k}$B expression demonstrated that it increased NF-$textsc{k}$B activity in a time- and concentration-dependent manner. This assay system could be used to determine the quantitative measurement of NF-$textsc{k}$B activity in the human skin and allow the screening of anti-inflammatory agents from various synthetic chemicals and natural products for dermatological purpose. Abbrevitions used: NF-$textsc{k}$B, nuclear factor kappa B; I-$textsc{k}$B, Inhibitory kappa B; SEAP, secreted alkaline phosphatase; NPT, neomycin phosphotransferease; PCR, polymerase chain reaction: dNTP, deoxynucleoside triphosphates; DMEM, dulbecco’s modified eagle medium; FBS, fetal bovine serum; PBs, phosphate-buffered saline; MUP, 4-methylumbellifery phosphate; NAC, N-acetyl-L-cysteine; DMSO, dimethyl sulfoxide; PMA, phorbol 12-myristate 13-acetate.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.20 no.1
• /
• pp.228-238
• /
• 1996

The purpose of this study was to evaluate the effect of chacteristics of knit fabrics on the microclimate of the skin simulating system. To determine the effect of characteristics of knit fabrics, vapor state of sweat pulse was simulated in the closed system. Different contents of fibers such as cotton, wool and polyester with different yarn size and knit types were chosen for specimens. The changes of humidity and temperature of air layer in the simulated systems were measured. Buffering indices, $K_d$ and $\beta_r$, were determined by considering $\alpha_p, \DeltaP_{max}, t_{max}, and tan\beta$. Physical properties of knit fabrics such as thickness, porosity, air resistance and moisture vapor transport were measured. Results showed that vapor pressure of wool was lower than cotton or polyester This was attributed to the hydrophilicity of wool which absorbed moisture rather quickly and retained in the knit fabric. The time to decrease vapor pressure was faster for polyester than cotton or wool. As a result, $K_d$ was in the order of wool> polye, item> cotton. $\beta_r$ of wool was rower than cotton or polyester due to its lowers porosity and slower desorption rate. For the yarn size, $K_d$ was in the order of 80's> 60's> 30's; thinner and lighter yarn showed better water vapor transport property. For knit type, buffering capacity of single jersey was better than interlock knit fabric. Statistical analysis showed that the air permeability was the most influential factor far the water vapor transport properties.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.3
• /
• pp.545-550
• /
• 2016

The main purpose of this study is to analyze and evaluate the feasibility of ligthweight pavement system with pile foundation on soft soil by laboratory small chamber test. In order to verify the stability of lightweight pavement system, the 1/30 scaled downed model system was tested at lab. The soft soil condition was simulated and group piles for skin friction resistance were used. Within the limited lab test, the settlements of pavement system were 0.86 mm for Case A, 0.70 mm for Case B, and 0.50 mm for Case C. The converted maximum settlement differential settlement were 25.8 mm and 10.8 mm. These values meet the inside of specification of Bridge Design Guide in Korea. The use of lightweight pavement systems on soft soils could be an alternative construction method on soft soils to reduce the challenges of conventional design and constructions.