• Journal of Sericultural and Entomological Science
• /
• v.5
• /
• pp.47-51
• /
• 1965

This report was prepared to find the relationship between silk finishing method and winding test result and the obtained results were as followings. 1. The breaks of a lot double skein was larger than that of single skein during winding test. 2. The rear side of test skein showed about double breaks of surface side of it. 3. The skein on silk book corner showed worst breaks, but the inner skeins showed least breaks. 4. The silk breaks per every ten minutes winding period decreased by and by. 5. The danger of silk breaks during winding test showed more in double skein than single skein in case of inperfect silk finishing. 6. The proper moisture content of raw silk after finishing is 10∼11％.

• The KIPS Transactions:PartC
• /
• v.19C no.3
• /
• pp.179-184
• /
• 2012

Due to the absence of an alternative algorithm SHA-2, NIST (National Institute of Standards and Technology) is proceeding to development project of SHA-3. NIST announced five candidates of the final round at the end of 2010. Side-channel attack scenarios of five candidates for SHA-3 final round have been proposed. In this paper, we prove the possibility of the analysis against 32-bit modular addition by 8-bit blocks from our experiment on ARM chip board with a register size of 32-bit. In total we required 9700 power traces to successfully recover the 128-bit secret key for the attack against.

• Bulletin of the Korean Mathematical Society
• /
• v.48 no.3
• /
• pp.469-474
• /
• 2011

The Kauffman bracket skein module $K_t$(M) of a 3-manifold M becomes an algebra for t = -1. We prove that this algebra has no non-trivial nilpotent elements for M being the exterior of the twist knot in 3-sphere and, therefore, it is isomorphic to the $SL_2(\mathbb{C})$-character ring of the fundamental group of M. Our proof is based on some properties of Chebyshev polynomials.

• Journal of Sericultural and Entomological Science
• /
• v.13 no.1
• /
• pp.69-72
• /
• 1971

1. To study proper sample size in boiling-of test, we extracted samples in size of 200, 100, 50, 20, and 10 grams and tested them. In the result of this test we couldn't find a statistical significance among them, but it is seemed that the proper sample size is 100 gram to think about the errors of measurement and treatment when the sample size is either too little or too much in ordinary test. 2. We tested boil-of result by twisted sample skein (sizing skein) and untwisted sample. In this test to use sodium carbonate (Na$_2$CO$_3$) having powerful sericin dissolving power as a scouring agent, boil-off percents made no statistical significance between two kinds of sample skein. And to use marseilles soap having less powerful sericin dissolving power as a scouring agent, boil-off percents made a difference between twisted and untwisted sample skein. 3. We compared five kinds of scouring agent, for example sodium carbonate, monogen, synthetic detergent (HiTi), marseilles soap A (made in Japan) and marseilles soap B (made in Korea). Among them synthetic detergent and marseilles soap B showed no statistical significance compared with marseilles soap A which we used in ordinary boil-off test. So synthetic detergent and marseilles soap B can be substituted for marseilles soap A. 4. Generally the higher pH value of boil of solution, tile more sericin dissolution, showed and vice versa.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.9
• /
• pp.2388-2404
• /
• 2012

Cryptographic hash functions are widely used in many information security applications like digital signatures, message authentication codes (MACs), and other forms of authentication. In response to recent advances in cryptanalysis of commonly used hash algorithms, National Institute of Standards and Technology (NIST) announced a publicly open competition for selection of new standard Secure Hash Algorithm called SHA-3. One important aspect of this competition is evaluation of hardware performances of the candidates. In this work we present efficient hardware implementations of SHA-3 finalists: JH, Keccak and Skein. We propose high speed architectures using Look-Up Table (LUT) resources on FPGAs, to minimize chip area and to reduce critical path lengths. This approach allows us to design data paths of SHA-3 finalists with minimum resources and higher clock frequencies. We implemented and investigated the performance of these candidates on modern and latest FPGA devices from Xilinx. This work serves as performance investigation of leading SHA-3 finalists on most up-to-date FPGAs.

• Kyungpook Mathematical Journal
• /
• v.48 no.2
• /
• pp.233-240
• /
• 2008

We present a quantum theorical background of the existence of multi-variable link invariants, for example the Kauffman polynomial, by observing the quantum (sl(2,$\mathbb{C}$), ad)-invariant from the Kontsevich invariant point of view. The background implies that the Kauffman polynomial can be studied by using the sl(N,$\mathbb{C}$)-skein theory similar to the Jones polynomial and the HOMFLY polynomial.

• Journal of Sericultural and Entomological Science
• /
• v.13 no.1
• /
• pp.73-78
• /
• 1971

The purpose of this study is to find out the method of conditioned weight test by which the dealing weight of raw silk can be calculated from true fiber in order to do the fair trading. The results of this study were as follows. 1. It is more reasonable than the current test that conditioned weight as a dealing weigh can be calculated by boil-off and moisture regain which is a percentage of boil-on and moisture regain to net weight. Because the boil-off and moisture regain can show directly the amount of true fiber and reproductibility in raw silk. In this study the boil-off and moisture regain is to take dry weight after boiling-off from net weight. 2. To calculate the conditioned weight from boil-of and moisture regain it would be proper that the standard additional ratio is 44 per cent of dry weight after boiling-off. 3. Boil-of percent of the sizing sample skein used in the size test did not show a statistical significance comparing with the boil-off percent of sample skeins (24 skeins) which may represent that of a lot. To observe this result boil-off percent of the sizing sample skein may represent that of a lot. 4. In Korea if conditioned weight test substitute for test of boil-off and moisture regain, we make a profit of two billion won in a year at the current market-price.

• Journal of Biomedical Engineering Research
• /
• v.39 no.5
• /
• pp.220-228
• /
• 2018

The internal resistance of microbial fuel cell (MFC) using stainless steel skein for oxidizing electrode was investigated and the factors affecting the voltage generation were identified. We also investigated the effect of power management system (PMS) on the usability for MFC and the removal efficiency of organic pollutants. The performance of a stack microbial fuel cell connected with (PMS) or PMS+LED was analyzed by the voltage generation and organic matter reduction. The maximum power density of the unit cells was found to be $5.82W/m^3$ at $200{\Omega}$. The maximum current density was $47.53A/m^3$ without power overshoot even under $1{\Omega}$. The ohmic resistance ($R_s$) and the charge transfer resistance ($R_{ct}$) of the oxidation electrode using stainless steel skein electrode, were $0.56{\Omega}$ and $0.02{\Omega}$, respectively. However, the sum of internal resistance for reduction electrode using graphite felts loaded Pt/C catalyst was $6.64{\Omega}$. Also, in order to understand the internal resistance, the current interruption method was used by changing the external resistance as $50{\Omega}$, $300{\Omega}$, $5k{\Omega}$. It has been shown that the ohm resistance ($R_s$) decreased with the external resistance. In the case of a series-connected microbial fuel cell, the reversal phenomenon occurred even though two cells having the similar performance. However, the output of the PMS constantly remained for 20 hours even when voltage reversal occurred. Also the removal ability of organic pollutants (SCOD) was not reduced. As a result of this study, it was found that buffering effect for a certain period of time when the voltage reversal occurred during the operation of the microbial fuel cell did not have a serious effect on the energy loss or the operation of the microbial fuel cell.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.11
• /
• pp.753-757
• /
• 2014

Anode electrode in a microbial fuel cell (MFC) should transfer the receiving electron as well as provide large surface area that can be immobilized microorganisms. Microorganisms' population is one of important factors to improve the current generation and to treat the livestock wastewater by biological treatment. These studies were attempted to investigate if stainless-steel wire skein (SSWS) could be used as anode electrode replacement a graphite felt electrode in microbial fuel cell. For these studies, pretreated livestock wastewater was used diluted to 500 mg/L as COD before use. At this time, the current showed a little difference of about 5% when using each of a SSW and graphite felt (control). There was no significant difference in the current value. The organic removal rate in the microbial fuel cells used graphite felt and SSWS was 82.4% and 88.3%, respectively. The COD removal in the MFC used the SSWS was higher than that of graphite felt. Ammonium nitrogen was showed similar trend in two case all. These results about current generation and organic matter reduction seem possible that SSWS was used to anode electrode. When SSWS is used, the initial investment for system construction is expected to be able to reduce by approximately 1/50.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.4
• /
• pp.219-225
• /
• 2022

1950-meter-tall goddess is Seolmundae Grandmother with the head of the 1950m Hallasan Mountain Baengnokdam and the body of the mountain ridgeline. Seolmundae Grandmother in Jeju is a folk belief that has been passed down from generation to generation in Jeju. Unlike inland, Seolmundae Grandmother, which had femininity in the customs of Jeju, which was a matrilineal society, developed into an absolute faith in Jeju, metaphorizing that in some way it was inevitable. Seolmundae Grandmother was the only subject that could mentally solve the biggest problem for Jeju residents, even if they were disconnected from the mainland. In other words, Seolmundae Grandmother was unable to make underwear for Seolmundae Grandmother because it was short of 100 bottles of silk, the god of Hallasan, a huge being and a physical symbol. Therefore, Semyungju Grandmother gave up the bridge connecting the mainland and Jeju. In this paper, focusing on the fact that Mt. Halla, covered with snow in winter, is like a skein of silk thread that we usually use in our daily lives, the etymology of Seolmundae has been changed to Saengmyeongju, - Semyungju, which is a skein of fine silk. As a basis for this, there is a custom of tying a thread of silk in 'Semyungju', a shrine to Semyeongju in Halmangdang, 'Hanmosal' along the coast of Pyoseon-myeon. The silk thread is the core of the Packing DNA gene. The summit of Mt. Halla, Ninety-Nine Valleys, and five hundred generals, found in Seolmundae Grandmother or White Silk, expressed the symbols of Jeju. The Packing DNA gene was found to originate in the Jeongnang