• Journal of the Korea Fashion and Costume Design Association
• /
• v.22 no.1
• /
• pp.1-13
• /
• 2020

The purpose of this study is to create a 3D avatar from 3D human body shape data using the CLO 3D virtual clothing program and to verify the feasibility of avatar production using the virtual clothing system for verifying size and shape. The research method was to select one virtual representative model that is the closest to the mean size of each body item for each age group. Using the 3D human body scan shape of a 40-69 years old male was applied to the CLO 3D virtual wearing system. Using the CLO 3D Avatar conversion menu, we verified the feasibility of creating a 3D avatar that reproduces the human body scan shape. In the dimension comparison between the 3D avatar and the fictitious representative model, the dimension difference was noticeable in height, circumference, and length. However, as a result, the converted 3D avatar showed less than a 5% difference in most human dimensions. In addition, since the body shape and posture were reproduced similarly, the utilization of the avatar was verified.

• Journal of the Korean Home Economics Association
• /
• v.40 no.12
• /
• pp.119-129
• /
• 2002

This research aims at finding out situation on purchasing clothes for kids, size recognition and fitting to provide basic data in order to establish standard sizes for kids' clothes. A survey was conducted to 360 mothers who have children ranging from first to third grade in elementary school on clothes purchasing method, wearing situation, criteria in deciding size and fitting preference. In terms of data analysis, frequency, percentage, mean, $X^2$-test, ANOVA and Duncan-test were used via SPSS PC program. The result is as follows; 1. While the recognition on brand was high, the recognition on body size was low: as a result, it is believed that it would be effective to mark the weight along with the brand. 2. Many times, they would select one or two size bigger on all items and they would go for a regular or one that fits as far as filling is concerned showing that it is different from adult clothes. 3. As far as obese kids, they would choose based on the diameter, so the diameter item is right but they are too long in general. The length question should be given special attention when manufacturing clothes for obese kids.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.43 no.3
• /
• pp.416-426
• /
• 2019

This study measured and analyzed male firefighters hand sizes as well as suggested data for developing firefighting gloves with a good fit. Accordingly, body dimensions related to the hand were measured for 100 male firefighters. Twenty-three measuring items related to the hand and lower arm were selected. The firefighters' measurement data were compared to general adult male measurements from the 6th Korean Anthropometric data to analyze the hand sizes characteristics of firefighters. As a result, height, hand circumference, hand breadth, wrist circumference, elbow-wrist length, forearm-fingertip length and firefighter weight were significantly larger than adult males. A correlation analysis for 23 items was conducted to select items used as standards for setting a size when manufacturing firefighting gloves. Hand length and circumference were selected as representative hand parts for making firefighting gloves. Cross analysis between hand length and circumference were conducted to find the section showing the highest distribution ratio. As a result, the highest sections were between 19cm and 21cm for hand circumference and between 18.5cm and 19.5cm for hand length, which may be suggested as the most important ranges.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.21 no.5
• /
• pp.501-509
• /
• 2001

For the enhancement of ECT reliability on the primary water stress corrosion cracks of nuclear steam generator tubes, of which the occurrence is on the increase, it is important to comprehend the signal characteristics on crack morphology and to select an appropriate probe type. In this paper, the sizing accuracy and the detectability for the inner wall axial cracks of tubes were quantitatively evaluated using the following specimens: the electric discharge machined notches and the corrosion cracks which were developed on the operating steam generator tubes. The difference of eddy current signal characteristics between pancake and axial coil were also Investigated. The results obtained from this study provide a useful information for more precise evaluation on the inner wall axial tracks oi stram generator tubes.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.19 no.3
• /
• pp.73-82
• /
• 2011

Most of countries start to restrict the emission gases of vehicles especially CO2 because of the global warming. Many vehicle companies including Toyota have launched various HEVs to satisfy the restriction laws and to improve the vehicle's efficiency. However, development for heavy-duty hybrid system is not plentiful rather than the passenger car. In this study, we choose the optimal size of engine, motor and battery for heavy-duty hybrid systems using dynamic programming. Also we analyze the correlation of the system's cost and efficiency because the added cost of vehicle to make the hybrid system is very important factor for the manufacturing companies. Finally, this study suggests a method to choose the appropriate system components size considering its performance and the cost. With this method, it is possible to select the component size for various systems.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.11
• /
• pp.64-74
• /
• 1999

A new clock skew optimization for clock routing using link-edge insertion is proposed in this paper. It satisfies the given skew bound and prevent the total wire length from increasing. As the clock skew is the major constraint for high speed synchronous ICs, it must be minimized in order to obtain high performance. But clock skew minimization can increase total wire length, therefore clock routing is performed within the given skew bound which can not induce the malfunction. Clock routing under the specified skew bound can decrease total wire length Not only total wire length and delay time minimization algorithm using merging point relocation method but also clock skew reduction algorithm using link-edge insertion technique between two nodes whose delay difference is large is proposed. The proposed algorithm construct a new clock routing topology which is generalized graph model while previous methods uses only tree-structured routing topology. A new cost function is designed in order to select two nodes which constitute link-edge. Using this cost function, delay difference or clock skew is reduced by connecting two nodes whose delay difference is large and distance difference is short. Furthermore, routing topology construction and wire sizing algorithm is developed to reduce clock delay. The proposed algorithm is implemented in C programming language. From the experimental results, we can get the delay reduction under the given skew bound.

• Korean Journal of Organic Agriculture
• /
• v.19 no.3
• /
• pp.357-372
• /
• 2011

We carried out the experiment to select the suitable sprout soybean varieties for environment-friendly cultivation in paddy field of southern part area, compares of excess moisture injury degree and yield ability among 29 sprout soybean varieties. Plant growth of sprout soybean was generally low in beginning and recovered after flowering due to rainfall. In paddy field cultivation, number of pod per individual and number of seed per individual were less in difference than upland cultivation, and maturing date was delayed 5-14 days than upland cultivation in most species. When environment-friendly cultivation, pest injury was not caused major problem for the growth during the vegetative period of soybean due to ground spider as natural enemy to insect pest. However, damage of stink bugs showed severe during grain filling period, and Dawonkong, Anpyeongkong, Dachaekong and Wonhwangkong showed susceptible to sting bug. SMV infection was weak and showed some necrosis symptoms in Sokangkong, but black root rot was not infected at all. Bacterial pustule began to be infected slowly from pod enlargement stage in most species, displayed severe symptoms in Dawonkong, Pungsannamulkong, Seonamkong and Sobaeknamulkong. The symptoms of pod anthracnose, pod blight and purple spot were greatly appeared after flowering. Disease resistance varieties was Paldokong, Kwangankong, Doremikong, Somyeongkong, Pungsannamulkong, Iksa-namulkong, Seonamkong, Sojinkong, Pureunkong, Bosugkong, Namhaekong and Sorokkong. Lodging index showed 3 in Saebyeolkong, and other species displayed slight lodging in 0-3 degree. 100-seed weight is 9.8-17.2g extent and increased 0.1-3.7g than upland cultivation in most species, but decreased in some species. Government purchase standard, species correspond to small-seed-size namulkong (Sizing screen diameter 4.0-5.6 mm) was Dawonkong, Dachaekong, Bosugkong, Seonamkong, Sokangkong, Hannamkong, Somyeongkong and Wonhwangkong. Species which seed yield was higher than Pungsannamulkong (266kg/10a) were Sorokkong, Hannamkong, Bosugkong and Sowonkong. Considering sprout soybean species, disease endurance, insect resistance, lodging resistance, 100-seed weight, yield ability and excess moisture tolerances synthetically, Seonamkong, Hannamkong, Doremikong, Bosugkong, Pungwonkong, Kwangankong, Sowonkong, Dagikong, Paldokong, Eunhakong and Pungsannamulkong were promising for environment-friendly cultivation in paddy field.