• 한국의류학회지
• /
• 제22권6호
• /
• pp.737-748
• /
• 1998

This study was carried out on 132 obese women who satisfied both of conditions for obesity: equal to or over 1.6 in Rohrer index and 90 in bust girth. The purpose of the study was to set up a sizing system using the loss function which would be a guide for obese women to select ready-to-wear of suitable size. The results were as follows. 1) In the sizing system for large size apparel industry, each company has 4 to 7 sizes that differ in their content and number. Producing only 5 sizes was trying to minimize the producti on expenses. 2) The sizing system according to the loss function was the follwings. The height was 3: 149, 154.5 and 161 cm. The bust girth was 5:96.5, 100.5, 104, 107.5, 112 cm. The hip girth was 5: 95, 99, 102.5, 105.5, 110 cm. 3) In comparing the cover ratio of the newly suggested sizing system for obese women's garment with that of the Korea Sizing system for women's garment, the former was founded to have the greater cover ratio.

• Journal of Electrical Engineering and Technology
• /
• 제6권6호
• /
• pp.731-741
• /
• 2011

Conventional methodologies (empirical, analytical, numerical, hybrid, etc.) for sizing photovoltaic (PV) systems cannot be used when the relevant meteorological data are not available. To overcome this situation, modern methods based on artificial intelligence techniques have been developed for sizing the PV systems. In the present study, the optimum PV/inverter sizing ratio for grid-connected PV systems with orientation due south and inclination angles of $45^{\circ}$ and $60^{\circ}$ in selected Algerian locations was determined in terms of total system output using type-2 fuzzy logic. Because measured data for the locations chosen were not available, a year of synthetic hourly meteorological data for each location generated by the PVSYST software was used in the simulation.

• 펄프종이기술
• /
• 제38권2호
• /
• pp.9-15
• /
• 2006

Neutral sizing is required for linerboard to solve the troubles in strength and process caused by recycled raw materials. AKD sizing efficiency can be influenced by process condition like white water quality, fines retention and so on. Therefore, this study was aimed to evaluate sizing performance of general and fast cure type AKDs using process water obtained from linerboard mill. To evaluate effect of process water quality on AKD sizing, white water was diluted with tap water at the different dilution ratios and UKP slurry was sized using the prepared water. Also, effects of inorganic and organic ion material on sizing were examined. When white water was used for stock forming, UKP sheet showed very low sizing degree. Sizing degree of sheet was increased with increase of dilution ratio because water quality was improved. Especially anionic organic material had a greater influence on AKD sizing than inorganic material. When white water quality was deteriorated, fast cure type AKD showed superior sizing performance to general type AKD.

• 한국의류학회지
• /
• 제44권2호
• /
• pp.310-320
• /
• 2020

This study established a lower garment sizing system for abdominal obesity adult women aged 30-59 based on 277 females selected from the 7th Size Korean Anthropometric survey. The criteria for subjects in this study were over 25 kg/㎡ of the BMI, over 85 cm of waist, and over 0.8 waist hip ratio. The results are as follows. The lower body analysis of abdominal obesity adult women showed that average circumference items were larger than the ordinary size, and the average length items were smaller. The standard deviation was applied around the average values of waist circumference and hip circumference for the suggestion of a lower garment sizing system for abdominal obesity adult women. The interval between the designation was ±1.5 cm with a waist circumference of 100 cm and ±2.5 cm with an average hip circumference of 100 cm. We established 13 designation sections in consideration of the cover ratio and cover efficiency. The cover ratio in the 13 nominal sections was 71.5%. The segmental distribution rate presented in the results will also be useful for production planning in specific sizes that helped enable rational production.

• 보존과학회지
• /
• 제35권2호
• /
• pp.153-158
• /
• 2019

아교포수는 안료가 한지에 번지거나 채색이 바탕에 흡수되는 것을 막아 바탕에 잘 고착되도록 하며, 바탕재와 물감 사이의 접착력을 강화한다. 본 연구는 아교포수 시 사용되는 아교와 백반의 혼합비, 아교포수의 횟수 변화에 따른 포수의 특성이 한지의 색상과 견뢰도에 미치는 영향을 평가하기 위하여 촉진노화시험을 실시하고 결과를 비교 분석하였다. 아교포수 된 한지의 색상 측정결과 아교수의 농도 및 아교포수의 횟수가 증가할수록 백색도 및 $L^*$ 값은 감소하였으나, 황색도는 증가하였다.

• 한국의류학회지
• /
• 제28권11호
• /
• pp.1524-1535
• /
• 2004

The purpose of this study was to develop middle school girl's' school uniform sizing system according to their body types. The data collected with anthropometric measurements from 390 middle school girls aged 12-15 years old was analyzed using t-test, ANOVA, factor analysis and cluster analysis. A new sizing system was developed in accordance with each of the 2 body-type clusters. The analysis of two-way distribution of 'height-bust girth' and 'height-waist girth' was conducted for the girls of the first grade, which is the time when they purchase their school uniforms. The interval of sizing system was defined in consideration with the most efficient distribution of the body sizes utilizing Loss Function. This study also provided Reference-Sizes and Growth-Allowance Measures for each sizing system to help pattern drafting and clothing construction of the uniform manufacturers. The cover ratio of sizing system proposed by this study was higher when compared with that of the National Agency for Technology and Quality and uniform manufacturing companies, Thus, the result of this study is expected to make up the current sizing system of the school uniform.

• 대한산업공학회지
• /
• 제31권3호
• /
• pp.194-200
• /
• 2005

A stochastic dynamic lot sizing problem for multi-item is suggested in the case that the distribution of the cumulative demand is known over finite planning horizons and all unsatisfied demand is fully backlogged. Each item is produced simultaneously at a variable ratio of input resources employed whenever setup is incurred. A dynamic programming algorithm is proposed to find the optimal production policy, which resembles the Wagner-Whitin algorithm for the deterministic case problem but with some additional feasibility constraints.

• 한국생활과학회지
• /
• 제12권4호
• /
• pp.553-558
• /
• 2003

The purpose of this paper was to design the sizing system of the head gears which would be a guide of men for selecting their head gears of suitable size. This study was carried out on 214 men and was done by cluster analysis with two variables(head circumference and bitragus to vertex arc length). The results were as follows : First, most of measurements were larger in men than in women. Second, the suitable numbers of size were found that 5 sizes were proper by cluster analysis with two variables. After the design of sizing system, the cover ratio was investigated in order to decide whether it is proper or not. Third, in the cover ratio, the 5 sizes were the highest in all of them.

• 한국항공우주학회지
• /
• 제40권7호
• /
• pp.590-600
• /
• 2012

본 논문에서는 태양전지나 연료전지와 같은 전기 에너지원을 사용하는 항공기에 적용할 수 있는 일반화된 사이징 방법에 대해 연구를 수행하였다. 다중 추진 시스템이나 에너지원이 사용되는 경우를 고려하여 다중 동력경로를 모델링하였고 소모성 에너지와 비소모성 에너지 중량을 각 임무 단계의 중량변화 계산에 반영하였다. 구속조건의 분석에서 기존의 추력 대 중량비 대신 동력 대 중량비를 선택하여 동력 균형 및 에너지 균형의 사이징 과정에 사용하였다.

• 한국항행학회논문지
• /
• 제22권2호
• /
• pp.111-122
• /
• 2018

현재 우리나라를 포함한 다수의 국가에서 지상 교통수송 체계가 포화상태에 이르렀다. 이를 해결하기 위해 교통체계의 3차원 화로 교통체증을 완화하고 door-to-door 이동성을 달성하고자 도로주행형 개인용 항공기 (PAV; personal air vehicle)에 관한 많은 연구가 진행되고 있다. 본 연구에서는 도로주행형 PAV의 사이징에서 지상 활주거리, 상승률, 최대 순항속도, 최대 상승고도, 실속 속도 등의 구속조건하에서 주요 설계 변수인 추력대중량비, 익면하중, 동력대중량비를 구하기 위한 구속조건 해석을 수행하였다. 또한 사이징 과정에서 국내 환경과 일반항공기급 인증기준인 FAR PART 23을 고려한 임무형상에 대하여 추력대중량비, 익면하중, 동력대중량비, 그리고 제동마력의 그래프를 통해서 설계점을 결정하는 연구도 수행하였다.