• 제목/요약/키워드: SizeKorea 2004

Search Result 1,145, Processing Time 0.029 seconds

Spatial Distribution of Benthic Macrofauna on the Tidal Flat of Garolim Bay, West Coast of Korea (서해 가로림만 갯벌의 대형저서동물 공간분포)

  • Shin, Sang Ho;Gu, Bon Joo;Je, Jong Geel
    • Journal of Wetlands Research
    • /
    • v.6 no.1
    • /
    • pp.57-72
    • /
    • 2004
  • Macrobenthic fauna were studied on a tidal flat in Garolim Bay in July 2002, in order to understand their spatial distribution with the surface sediment types. Forty-nine stations were set on the tidal flat. A total of 147 species was sampled with the mean density of $1,140ind./m^2$ and the mean biomass of $157.2g/m^2$. The polychaetes were speices- and density-dominant faunal group with 64 species and the mean density of $791ind./m^2$. Mollusks were biomass-dominant faunal group with $132.0g/m^2$. Major dominant species were two polychaetes, Mediomastus californiensis with the mean density of $374ind./m^2$ and Heteromastus filiformis with $224ind./m^2$. Also mollusks such as Umbonium thomasi, Batillaria cumingi and Ruditapes philippinarum was relatively high in the mean density, showing the density of 45, 42, $32ind./m^2$ respectively. Especially, U. thomas was distributed in the mouth of the bay, where sediment grain size is rather coarse, and R. philippinarum at near tidal channel. Based on the cluster analysis, the macrobenthic community on the tidal flat was classified into seven station groups depending on the benthic environmental parameters(sediment types). Compared with other Korean tidal flats, species richness of Garolim tidal flats is more and less low.

  • PDF

Morphology of La-Co substituted SrM ferrite (La-Co 치환량에 따른 스트론튬 페라이트의 미세구조)

  • Jang Se-Dong
    • Proceedings of the Korean Institute of Resources Recycling Conference
    • /
    • 2004.12a
    • /
    • pp.27-34
    • /
    • 2004
  • This experiment was carried out to examine the effects of morphology on properties of La-Co substituted SrM ferrite. The magnetic properties of calcined and sintered materials varied with the substitutional amount of La and Co elements in Sr-ferrite. In the substituted SrM ferrite, the atomic fraction x of La is directly related to the mole ratio n of iron oxide and the atomic fraction y of Co by equation x=2ny. The HcJ values of the calcined powder were about 270 kA/m and 240 kA/m with x=0.3 and K=0.2, respectively at stoichiometriy, n=6.0. Crystallites of the sintered material were grown with a plate shape, and their size decreased with increasing mole ratios. Such a shape was caused by the initial state of crystallite formed after calcination. In case of x=0.3 and n=6.0, Br was 415 mT and HcJ was 355 kA/m, and in x=0.2 and n=6.0, Br was 410 mT and HcJ was 370kA/m. The squareness in 2nd quarter of BH curve with x=0.2 was smoothly improved compared with x=0.3

  • PDF

An Empirical Test of Negative Correlations between Operating and Financial Leverages (레버리지 분석에 의한 국내제조기업의 재무의사결정 행태 분석)

  • Jang, Ik-Hwan;Yoon, Yeo-Jun
    • The Korean Journal of Financial Management
    • /
    • v.21 no.1
    • /
    • pp.33-58
    • /
    • 2004
  • This paper tests Van Home's hypothesis, a negative correlation between degrees of operating leverage(DOL) and financial leverage(DFL). For an empirical analysis, we extract information from financial statements of manufacturing companies listed in the Korea Stock Exchange. Data extend from 1980 to 2001. The DOL continued to increase until 1997, but decreased dramatically after the IMF financial crisis. However, the DOL has been at a higher level than companies of other countries such as USA and Japan. The DFL has been maintained at a much higher level, as expected. The empirical results indicate a positive correlation between the DOL and the DFL, which is inconsistent with the VanHorne's hypothesis. To further investigate, we divide the whole sample into subgroups according to such management elements as asset size, level of leverages, earnings and cash flow. The results for sub-samples are different from those of whole sample. This indicates we need to incorporate specific managerial factors in order to correctly explain financial decision processes.

  • PDF

에너지 소비효율 개선과 리바운드 효과: 수송부문을 중심으로

  • Kim, Dae-Uk;Kim, Jong-Ho
    • Environmental and Resource Economics Review
    • /
    • v.21 no.2
    • /
    • pp.321-340
    • /
    • 2012
  • Korean government recently announced that new passenger cars sold within South Korea in 2009 ran an average of 12.27 kilometers per liter of fuel, which is an 7% point increase of the fuel efficiency. The government interpreted these improvements in the fuel economy as energy savings of 60,000 toe and as a reduction of 160,000 ton $CO_2$ emissions. However, improvements in energy efficiency make energy services cheaper, which is known as rebound effect. If this rebound effect exists, and the size of the effect is not negligible, ignoring this could result in overestimating the energy savings achieved by the fuel efficiency increase. Using detailed data on household and vehicle characteristics, our results suggest that there exist a short-run rebound effect of 0.299(29.9%) for the Korean automobile industry. This is notably smaller than the estimates of West (2004), which finds an estimate of 87% using cross-section data for the US. Furthermore our results highlight the importance of rebound effect on energy savings and the $CO_2$ emissions reduction. Our estimates suggest that the report from Korean government overestimates the energy savings and related $CO_2$ emissions by 29.9% point.

  • PDF

A Study on Groundwater Flow Modeling in the Fluvial Aquifer Adjacent to the Nakdong River, Book-Myeon Area, Changwon City (창원시 북면 낙동강 주변 하성퇴적층의 지하수유동 모델링 연구)

  • Hamm Se-Yeong;Cheong Jae-Yeol;Kim Hyoung-Su;Hahn Jeong-Sang;Ryu Su-Hee
    • Economic and Environmental Geology
    • /
    • v.37 no.5
    • /
    • pp.499-508
    • /
    • 2004
  • Changwon City first constructed riverbank filtration plants in Book-Myeon and Daesan-Myeon in Korea in the year 2001. This study evaluated hydrogeological characteristics and groundwater flow simulation between the Nakdong River and the fluvial aquifers adjacent to the river in Book-Myeon, Changwon City. The groundwater simulation calculated the influx rate from the Nakdong River and the fluvial aquifers to pumping wells through the riverbank filtration system. The groundwater flow model utilized drilling, grain size analysis, pumping test, groundwater level measurements, river water discharge and rainfall data. Hydraulic heads calculated by the steady-state model closely matched measured heads in pumping and observation wells. According to the transient flow model, using a total pumping amount of 14,000 $m^3$/day, the flux into the pumping wells from the Nakdong River accounts for 8,390 $m^3$/day (60%), 590 $m^3$/day (4%) is from the aquifer in the rectilinea. direction to the Nakdong River, and 5,020 $m^3$/day (36%) is from the aquifer in the parallel direction to the Nakdong River. The particle tracking analysis shows that a particle from the Nakdong River moves toward the pumping wells at a rate of about 1.85 m/day and a particle from the aquifer moves toward the pumping wells at a rate of about 0.75 m/day. This study contributes to surface water/groundwater management modeling, and helps in understanding, how seasonal change affects pumping rates, water quality, and natural recharge.

Bacterial Community Structure and Diversity Using 16S rDNA Analysis in the Intertidal Sediment of Ganghwa Island (16S rDNA 분석을 이용한 강화도 장화리 갯벌 퇴적물 내 미생물 군집구조 및 다양성)

  • Cho Hye Youn;Lee Jung-Hyun;Hyun Jung-Ho
    • Korean Journal of Microbiology
    • /
    • v.40 no.3
    • /
    • pp.189-198
    • /
    • 2004
  • T-RFLP analysis and clone sequencing analysis based on bacterial 16S rDNA were conducted to assess bacterial community structure and diversity in two layers (0-1cm, 6-7cm depth) of the sediment from Janghwari intertidal flat in Ganghwa Island. The results of T-RFLP (terminal-restriction fragment length polymorphism) analysis using restriction enzyme HhaI showed that the T-RFs of various size ($60{\pm}2$) bp-($667{\pm}2$) bp) appeared evenly at the surface sediments but two T-RFs with 60(${\pm}2$)bp and 93 (${\pm}2$)bp predominated at 6-7cm depth. Analysis of partial sequences for 172 clones revealed that 98% of the clones were not matched with the sequences of cultured bacteria strains in the GenBank (${\geq}similarity$ 98%), and approximately 86% of them were classified as different phylotypes. Most clones belonged to $\alpha$-, $\gamma$-, and $\delta$-Proteobacteria, Acidobacteria/Holophaga and green nonsulfur bacteria group. Proteobacteria group occupied the highest proportion in both layers (69% at 0-1cm depth and 46% at 6-7cm depth). $\gamma$-Proteobacteria and $\delta$-Proteobacteria that are associated with oxidation and reduction of sulfur compounds were appeared to be dominant, and comprised 21.5% and 15.7% of total clones, respectively. Overall results indicated that extremely diverse bacterial groups were inhabiting in the sediment of Ganghwa intertidal flat, and bacterial communities associated with the behaviour of sulfur seemed to playa significant role in the biogeochemical environment in this anoxic sediment.

Recycling of Waste XLPE Using a Modular Intermeshing Co-Rotating Twin Screw Extruder (모듈라 치합형 동방향회전 이축 스크류식 압출기를 이용한 폐 XLPE의 재활용)

  • Bang, Dae-Suk;Oh, Soo-Seok;Lee, Jong-Keun
    • Elastomers and Composites
    • /
    • v.39 no.2
    • /
    • pp.131-141
    • /
    • 2004
  • The recycling of waste XLPE(crosslinked polyethylene), which is a major source of scraps from high voltage power transmission cables, has been discussed. The waste XLPE scraps were ground into fine powder with various sizes from less than $100{\mu}m$ up to about $1000{\mu}m$ using two types of tailor-made pulverizers. The compounds were prepared in a modular intermeshing co-rotating twin screw extruder at various conditions such as different compositions, types and powder sizes of waste XLPE, screw configurations and various polymer matrices (LDPE, HDPE, PP, PS). The mechanical and rheological properties and the fracture surface or the compounds were investigated. It was found that an improved impact strength was obtained from the compound with white XLPE powder pulverized from the scraps without outer/inner semi-conductive layers. Generally, the impact strength increases with the content of XLPE but decreases with the size of XLPE. Especially for LDPE, the extrusion was possible up to 80 wt% loading of XLPE. Also, the impact strength increases with the number of kneading disc blocks in the given screw configurations. The melt viscosity of the compounds increases with increasing XLPE loading. However, the higher shear thinning behavior of the compounds at common shear rates implies proper processibility of the compounds. In addition, the impact strength for other polymer matrices used increases with XLPE and it is noticeable that the impact strength of PS/XLPE (80/20 wt%) compound was improved twice that of pure PS.

Performance Analysis of the Gated Service Scheduling for Ethernet PON (Ethernet PON을 위한 Gated Service 스케줄링의 성능분석)

  • 신지혜;이재용;김병철
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.41 no.7
    • /
    • pp.31-40
    • /
    • 2004
  • In this paper, we analyze mathematically the performance of the gated service scheduling in the Interleaved Polling with Adaptive Cycle Time(IPACT) was proposed to control upstream traffic for Gigabit Ethernet-PONs. In the analysis, we model EPON MAC protocol as a polling system and use mean value analysis. We divide arrival rate λ into three regions and analyze each region accordingly In the first region in which λ value is very small, there are very few ONUs' data to be transmitted. In the second region in which λ has reasonably large value, ONUs have enough data for continuous transmission. In the third region, ONUs' buffers are always saturated with data since λ value is very large. We obtain average packet delay, average Queue size, average cycle time of the gated service. We compare analysis results with simulation to verify the accuracy of the mathematical analysis. Simulation requires much time and effort to evaluate the performance of EPONs. On the other hand, mathematical analysis can be widely used in the design of EPON systems because system designers can obtain various performance results rapidly. We can design appropriate EPON systems for varioustraffic property by adjusting control parameters.

The Cell Resequencing Buffer for the Cell Sequence Integrity Guarantee for the Cyclic Banyan Network (사이클릭 벤얀 망의 셀 순서 무결성 보장을 위한 셀 재배열 버퍼)

  • 박재현
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.41 no.9
    • /
    • pp.73-80
    • /
    • 2004
  • In this paper, we present the cell resequencing buffer to solve the cell sequence integrity problem of the Cyclic banyan network that is a high-performance fault-tolerant cell switch. By offering multiple paths between input ports and output ports, using the deflection self-routing, the Cyclic banyan switch offer high reliability, and it also solves congestion problem for the internal links of the switch. By the way, these multiple paths can be different lengths for each other. Therefore, the cells departing from an identical source port and arriving at an identical destination port can reach to the output port as the order that is different from the order arriving at input port. The proposed cell resequencing buffer is a hardware sliding window mechanism. to solve such cell sequence integrity problem. To calculate the size of sliding window that cause the prime cost of the presented device, we analyzed the distribution of the cell delay through the simulation analyses under traffic load that have a nonuniform address distribution that express tile Property of traffic of the Internet. Through these analyses, we found out that we can make a cell resequencing buffer by which the cell sequence integrity is to be secured, by using a, few of ordinary memory and control logic. The cell resequencing buffer presented in this paper can be used for other multiple paths switching networks.

How Much should the Poor Pay for their Health Care Services under the National Health Insurance System? (계층간 진료비 본인부담의 형평성에 관한 연구)

  • Kim, Hak-Ju
    • Korean Journal of Social Welfare
    • /
    • v.56 no.3
    • /
    • pp.113-133
    • /
    • 2004
  • Although National Health Insurance(NHI) in the South Korea has guaranteed access to health insurance coverage to virtually all the people, a significant portion of out-of-pocket spending can create substantial financial burdens for some beneficiaries, particularly those with low incomes. Previous studies have estimated the magnitude of out-of-pocket spending by types of chronic illness or in- and out-patients. Prior estimates, however, have not given a complete picture of the impact of health care costs on lower-income populations. The result from this study shows that 20 percent of beneficiaries in the lowest-income quintile spent more than twelve percent of their household equivalent income out-of-pocket health services, whether they were enrolled in a Health care services or not. In comparison, the beneficiaries in the highest-income quintile level spent only 2 percent of their income out-of-pocket on health care. Also, the regression analysis suggests that age, household income, number of chronic illness, type of hospital in addition to the number of usage may affect the size of out-of-pocket spending.

  • PDF