• 천문학회보
• /
• 제39권2호
• /
• pp.82-82
• /
• 2014

One of the subjects in clouds' structure and development is small scale structure of interstellar cloud. The possibility of AU scale structure (Marscher et al. 1993; Moore & Marscher 1995; Roy et al. 2012) is discussed, and this small scale structure is considered as the result of hydrogen volume density (Moore & Marscher 1995), or small-scale chemical and other inhomogeneities (Liszt & Lucas 2000). In order to study this subject with emission line, extremely high resolution is mandatory by VLBI system. However, the alternative method could be observing the absorption line of interstellar cloud on the continuum object. In this case, the resolution would be restricted to the size of the continuum object, if the size of the object is smaller than the resolution of a used telescope. We observed the previous researchers' three objects (BLLAC, NRAO150, B0528+138), whose spectrums are changed from 1993 to 1998 (Liszt & Lucas 2000), with KVN. Through KVN observation, we found the changes of optical depth spectrum compared with the previous spectrums. We will discuss the optical depth spectrum variation by time variation and the meaning of it.

• 한국분무공학회지
• /
• 제9권3호
• /
• pp.1-7
• /
• 2004

This experiment was undertaken to investigate the atomization characteristics of the low viscosity biodiesel blended fuel and ultrasonic energy added one. Test fuels were conventional diesel fuel and biodiesel fuel. We compared to the characteristics of viscosity and surface tension, SMD between low viscosity biodiesel blended fuel and ultrasonic energy added one. Sauter mean diameter was measured under the variation of the spray distance. Viscosity and surface tension was measured under the variation of the time trace. To measure the droplet size, we used the Malvern system 2600C. Droplet size distribution was analyzed from the result data of Malvern system. Through this experiment, we found that the condition of the ultrasonic energy added situation had smaller Sauter mean diameter of droplet, viscosity and surface tension than that of the conventional situation.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 추계학술대회 논문집
• /
• pp.122-127
• /
• 2004

The purpose of this study is to introduce the standard of the durability and evaluation method for paper shredder. The major evaluation criteria include shredding capability, shredding blade (or cutter) hardness and edge roughness, and durability. Due to the difficulties in assessing the durability directly, performance deterioration of the shredder was assessed by measuring the torque variation along with the variation in shredded chip size and load, thereby proposing the indirect method of assessing the paper shredder durability.

• Applied Microscopy
• /
• 제42권4호
• /
• pp.194-199
• /
• 2012

The anatomy and morphology of seeds from 10 Hawaiian Portulaca taxa were examined to explore patterns of variation among the taxa, and to evaluate their phylogenetic relationships. Features of seeds were assessed employing microtechnique procedures, statistical analysis, and scanning electron microscopy (SEM). Anatomically, the orientation of embryo was consistent across taxa, and all seeds examined had central nutritive tissue and integuments comprising the peripheral embryo. Seeds were generally small, circular to ovoid in shape, and either smooth or rough-surfaced, with tubercules. Variation in seed size was noted, although minimal within small seeded group. The size of seeds ranged from 0.50~1.26 mm in length, and 0.55~1.34 mm in width, with similar weights. Seeds were distinguished by the sculpture and arrangement of the testa epidermis and the way in which their stellulate-tessellate cells uniquely fit together. Using a multiple range test (ANOVA), two groups were established by seed characteristics. The SEM also demonstrated morphological differences in testa sculpturing. The results obtained confirm the usefulness of seed characteristics in the identification of the species examined, and furthermore, allow for the separation of the Hawaiian Portulaca into two groups.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.171-172
• /
• 2006

Most existing studies for stress analysis of teeth have employed small number of teeth, and used big element size using F-E models. Therefore, the results are not accuracy enough for showing the internal stress variation. 15 males' and 13 females' mandibular first premolar are employed for internal structure's study of teeth and small element size for a FE model are used. According to these processes, stress distribution of internal parts of teeth are well shown, and the stresses are varied a lot between enamel layer and dentine layer, but there is little variation on pulp chamber.

• 한국표면공학회지
• /
• 제39권3호
• /
• pp.115-120
• /
• 2006

The codeposition behavior of WC particles from an additive-free nickel sulfate and sulfamate solution has been investigated. Electroplating of Ni/WC composites was carried out at different current density with variation of WC particle size. The Guglielmi adsorption mechanism is applied to the electroplating of the fine WC in Ni matrix. The contents of WC in Ni composite coating were increased both by increasing current density and WC concentration in the bath. The hardness of Ni/WC composite coating at low current density is higher than that at high current density since finer WC particles dispersed through the coating. The codeposition behaviors of Co coated WC particles were also investigated. Conducting layer of particles promoted the codeposition behavior of Ni/WC-Co composite coatings.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.879-880
• /
• 2006

Effect of phase transformation and grain-size variation of hot-pressed cobalt on its dry sliding wear was investigated. The sliding wear test was carried out against glass (83% $SiO_2$) beads at 100N load using a pin-on-disk wear tester. Worn surfaces, cross sections, and wear debris were examined by an SEM. Phases of the specimen and wear debris were identified by an XRD. Thermal transformation of the cobalt from the hcp $\varepsilon$ phase to the $\gamma$ (fcc) phase during the wear was detected, which was deduced as the wear mechanism of the sintered cobalt.

• 한국해양공학회지
• /
• 제13권2호통권32호
• /
• pp.58-65
• /
• 1999

The effect of specimen thickness on fatigue crack growth rate was studied. The objective of the present study is to investigate the effect of specimen thickness on the fatigue crack growth behavior at various stress intensity factor ranges and also the variation of material restance to fatigue crack growth. The fatigue crack growth resistance was treated as a spatial stochastic process, which varies randomly on the crack path, Compact tension specimens with a LT orientation for structural steel were used. All testing was done at a constant stress intensity level. The experimental data were analyzed for the size effect to determine the Weibull distributions of the material resistance.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.861-864
• /
• 2000

Ferroelectric thin film capacitors with high dielectric constant are important for the application of memory devices. In this work, thin films of PLT(28)(Pb$\sub$0.72/La$\sub$0.28/Ti$\sub$0.93/O$_3$) were fabricated on Pt/Ti/SiO$_2$/Si substrates in-situ annealing and ex-situ annealing have been compared depending on the annealing time. We have systematically investigated the variation of grain sizes depending on the condition of post-annealing and the variation of deposition rate. C-V measurement, ferroelectric properties, leakage current and SEM were performed to investigate the electrical properties and the microstructural properties of Pb(La,Ti)O$_3$.

• 한국세라믹학회지
• /
• 제56권1호
• /
• pp.84-90
• /
• 2019

The varistor properties and stability against dc-accelerated stress of $V_2O_5-Mn_3O_4-Co_3O_4-Dy_2O_3-Nb_2O_5-Bi_2O_3$ (VMCDNB)-doped zinc oxide ceramics sintered at $850-925^{\circ}C$ were investigated. Increasing the sintering temperature increased the average grain size from 4.6 to 8.7 mm and decreased the density of the sintered pellet density from 5.54 to $5.42g/cm^3$. The breakdown field decreased from 5919 to 1465 V/cm because of the increase in the average grain size. Zinc oxide ceramics sintered at $875^{\circ}C$ showed the highest nonlinear coefficient (43.6) and the highest potential barrier height (0.96 eV). Zinc oxide ceramics sintered at $850^{\circ}C$ showed the highest stability: the variation rate of the breakdown field was -2.0% and the variation rate of the nonlinear coefficient was -23.3%, after application of the specified stress (applied voltage/temperature/time).