• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.1126-1133
• /
• 2005

The effects of mean particle size and uniformity coefficient of dredged soils to the liquefaction resistance strength and dynamic characteristics are experimentally studied in this paper. Representative 4 mean particle sizes and 3 uniformity coefficients were selected and 12 representative particle size distribution curves which have different mean particle sizes and uniformity coefficients, were artificially manufactured using the real dredged river soil. Cyclic triaxial tests and torsional shear tests were carried out to analyze the effect of mean particle size and uniformity coefficient to the liquefaction resistance strength and dynamic characteristics of soils.

• Journal of the Optical Society of Korea
• /
• 제20권5호
• /
• pp.586-592
• /
• 2016

This paper proposes a luminance compensation method using optical sensors to achieve high luminance uniformity of active matrix organic light-emitting diode (AMOLED) displays. The proposed method compensates for the non-uniformity of luminance by capturing the luminance of entire pixels and extracting the characteristic parameters. Data modulation using the extracted characteristic parameters is performed to improve luminance uniformity. In addition, memory size is optimized by selecting an optimal bit depth of the extracted characteristic parameters according to the trade-off between the required memory size and luminance uniformity. To verify the proposed compensation method with the optimized memory size, a 40-inch 1920×1080 AMOLED display with a target maximum luminance of 350 cd/m² is used. The proposed compensation method considering a 4σ range of luminance reduces luminance error from ± 38.64%, ± 36.32%, and ± 43.12% to ± 2.68%, ± 2.64%, and ± 2.76% for red, green, and blue colors, respectively. The optimal bit depth of each characteristic parameter is 6-bit and the total required memory size to achieve high luminance uniformity is 74.6 Mbits.

• 한국지반공학회논문집
• /
• 제21권7호
• /
• pp.13-20
• /
• 2005

본 연구에서는 입도분포가 액상화 저항강도 및 동적물성치에 미치는 영향을 실험적으로 검증하였다. 우리나라 준설매립토의 입도분포 조사를 통해 준설매립토의 보편적인 평균입경 4가지와 균등계수 3가지를 선정하였고 평균입경과 균등계수를 각각 달리한 총 12종류의 대표적 준설매립토의 입도분포를 선정, 시료를 제작하였다. 제작된 시료를 이용하여 진동삼축시험을 수행하여 평균입경과 균등계수가 액상화 저항강도에 미치는 영향을 분석하였다. 또한 공진주시험을 수행하여 입도분포가 동적물성치에 미치는 영향도 분석하였다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2015년도 춘계학술대회 논문집
• /
• pp.113-113
• /
• 2015

본 연구에서는 thermal evaporation법을 이용하여 제작한 CdTe 후막의 미세구조, 전기적 특성 및 X-선 조사에 따른 특성을 비교분석하였다. 기판온도를 $370{\sim}450^{\circ}C$로 변화시키며 증착하였으며, CdCl2 첨가에 따른 미세구조 변화를 관찰하였다. CdTe 막의 상 하부에 전극을 형성하여 I-V 특성을 평가하고, 실제 X-ray를 샘플에 조사하여 sensitivity를 측정하였다. 박막형성 초기에는 기판온도가 증가함에 따라 grain size가 증가하였지만, grain uniformity는 감소하였다. X-ray 특성향상을 위해서는 grain size와 uniformity 모두 중요한 인자이기 때문에 uniformity 향상을 위해 Cl을 첨가하였다. 미량의 Cl 첨가에서는 큰 변화를 보이지 않았지만 더 많은 양의 Cl 첨가 시, grain size 와 uniformity 모두 증가되는 것을 확인하였으며, 그에 따라 I-V, X-ray 조사 특성 모두 개선되는 것을 확인할 수 있었다.

• 한국재료학회지
• /
• 제14권3호
• /
• pp.196-202
• /
• 2004

A numerical simulation based on the finite element method is used to investigate the effect of a reciprocal paddle on the uniformity of deposition rates at a patterned electrode. The calculated deposition rates agreed well with the measured values. The influences of the paddle velocity, the gap between cathodes and paddles, anode size and the distance between the anode and cathode have been studied. The optimum conditions on the paddle and geometric factors for electrodeposit uniformity could be obtained.

• Macromolecular Research
• /
• 제12권2호
• /
• pp.240-245
• /
• 2004

Monodisperse PMMA micro spheres are prepared by means of a simple soap-free emulsion polymerization in methanol-enriched aqueous medium in a single step process. The size and uniformity of the microspheres are dependent on the polymerization temperature. In a stable system, the uniformity is improved with the polymerization time. The most uniform and stable micro spheres are obtained under mild agitation speed of 100 rpm at 70$^{\circ}C$. The monodisperse PMMA microspheres in the size range of 1.4-2.0 $\mu\textrm{m}$ having less than 5% size variation are successfully achieved with varying concentrations of monomer and initiator. As the monomer and initiator concentrations increase, the larger micro spheres with enhanced uniformity are obtained. However, the decreased amount of water induces the polydisperse PMMA particles due to the generation of secondary particles.

• 한국환경과학회지
• /
• 제22권11호
• /
• pp.1481-1498
• /
• 2013

The SCR (selective catalytic reduction) system is highly-effective technique for NOx reduction from exhaust gases. In this study, the effects of the direction and size of nozzle and the ammonia injection concentration on the performance of SCR system are analyzed by using the computational fluid dynamics method. When the nozzle is arranged in zigzaged direction which is normal to exhausted gas flow, it is shown that the uniformity of gas flow and the NH3/NO molar ratio is improved remarkably. With the change of the ammonia injection concentration from 0.2 vol%(wet) to 1.0 vol%(wet), the uniformity of gas flow shows a good results. As the size of nozzle diameter changes from 6 mm to 12 mm, the uniformity of gas flow is maintained well. It is shown that the uniformity of the $NH_3/NO$ molar ratio becomes better with decreasing the ammonia injection concentration and the size of nozzle diameter.

• 반도체디스플레이기술학회지
• /
• 제21권3호
• /
• pp.125-129
• /
• 2022

The current display technology tends to be highly integrated with high resolution, the element size is gradually downsized, and the structure becomes complicated. Inductively coupled plasma (ICP) dry etcher of various types of etching equipment is a structure that places a large multi-divisional antenna source on the top lid, passes current to the Antenna, and generates plasma using the induced magnetic field generated at this time. However, in the case of a device of a large area size, a support that can withstand a load structurally is necessary, and when these support portions are applied, arrangement of antenna becomes difficult, which causes reduction in uniformity. As described above, the development of antenna source of a large area having a uniform plasma density on the whole surface is difficult to restrict hardware (H/W). As a solution to this problem, we confirmed the change in uniformity of plasma by applying two kinds of specific shape faraday shield(FICP) to the lower part of the large area upper lid antenna of 6 and 8th more than that generation size. In this thesis, we verify the faraday shield effect which can improve plasma uniformity control of ICP dry etcher equipment applied to medium and large displays.

• 한국수소및신에너지학회논문집
• /
• 제32권5호
• /
• pp.331-339
• /
• 2021

This study presents a novel way to enhance uniformity of the gas flow inside the solid oxide fuel cell (SOFC), which is critically important to fuel cell performance, by using dimples. A pattern of dimple, which works as a flow distributor/collector, is designed at the inlet and outlet section of a straight channel gas separator. Size of the dimples and the gap between them were changed to optimize the flow uniformity, and any change in size or gap is considered as one design. The results show that some dimple patterns significantly enhance the uniformity compared to baseline, about 4%, while the others slightly reduce it, about 1%. Besides, the dimple pattern also affects to the pressure drop in the flow channel, however the pressure drop in all cases are negligible (less than 26.4 Pa).

• 전기전자학회논문지
• /
• 제27권4호
• /
• pp.679-682
• /
• 2023

무선센서 네트워크에서 센서 노드간의 통신 연결 실패는 계속된 연결 시도를 유발하여 많은 전력 손실이 발생한다. 본 논문에서는 CH(Cluster Head) 노드와 통신되는 센서 노드 사이의 적정 거리를 제한하여, 2차원 평면상에 적정 크기의 클러스터 그룹이 형성되도록 하였다. 클러스터 크기의 균일화를 위해 최단 거리에 존재하는 센서 노드들이 서로 통신하여 멤버 노드를 구성하고 근접한 노드를 모아서 클러스터가 형성되도록 하였다. 제안한 클러스터 균일화 알고리즘을 기반으로 클러스터링을 위한 최단 거리 기반의 클러스터링 방식에 대한 클러스터 균일화 개선율을 시뮬레이션 결과로 나타내었다. 제안한 방식은 네트워크의 클러스터 균일성을 약 30% 향상시킬 수 있다.