• Title/Summary/Keyword: Size trend

Search Result 1,200, Processing Time 0.025 seconds

A Study on the Change of Humidity by City Size in South Korea (한국의 도시 규모별 습도 변화에 관한 연구)

  • Ko, Myungchan;Lee, Seungho
    • Journal of the Korean Geographical Society
    • /
    • v.48 no.1
    • /
    • pp.19-36
    • /
    • 2013
  • This study aimed to investigate the change of humidity by city size in South Korea. Using daily mean relative humidity and water vapor pressure during the period of 1954~2011 for 14 weather stations in South Korea, the change of humidity by city size was analyzed. The change of relative humidity had a continuous decreasing trend for the period of 1954~2011. The decreasing trend in large city was bigger than these of rural one. The seasonal relative humidity was significantly changed in spring and winter. The change of water vapor pressure was rarely changed significance of the results by city size. It was not shown the result to constant trend by city size. There was a negative correlation between relative humidity and mean temperature. And change of relative humidity was correlated with city size. Moreover, there was not correlation between relative humidity and water vapor pressure by city size. The decreasing trend of relative humidity was similar to increasing trend of temperature by urbanization. However, there was not shown significant result of water vapor pressure.

  • PDF

Adaptive Queue Management Based On the Change Trend of Queue Size

  • Tang, Liangrui;Tan, Yaomu
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • v.13 no.3
    • /
    • pp.1345-1362
    • /
    • 2019
  • Most active queue management algorithms manage network congestion based on the size of the queue but ignore the network environment which makes queue size change. It seriously affects the response speed of the algorithm. In this paper, a new AQM algorithm named CT-AQM (Change Trend-Adaptive Queue Management) is proposed. CT-AQM predicts the change trend of queue size in the soon future based on the change rate of queue size and the network environment, and optimizes its dropping function. Simulation results indicate that CT-AQM scheme has a significant improvement in loss-rate and throughput.

A Study on the Trend Analysis of the Parking Demands According to the Housing Unit Size at Apartment Complex - Focused on high-rise apartment complexes in Daegu Metropolitan City - (아파트 단지의 세대규모별 주차수요 추세분석에 관한 연구 - 대구광역시 고층분양아파트단지를 중심으로 -)

  • Park Chan-Don
    • Journal of the Korean housing association
    • /
    • v.16 no.1
    • /
    • pp.55-63
    • /
    • 2005
  • The purpose of this study is to find a way of solving on parking problems at apartment complex through the trend analysis research of the parking demands according to the housing unit size. The subjects of this study are high-rise apartment complexes in Daegu city which are constructed within 10 years. The parking demand according to the housing unit size at apartment complexes had been surveyed every July for 4 years from 2000 to 2003. Specially, we knew that the parking demand of $85 m^2$ below sized housing unit at apartment complex was exceeded architectural regulation of parking supply, and the parking demand of $85 m^2$ over sized housing unit at apartment complex was kept within architectural regulation of parking supply. And, the estimating formula that can predict the future parking demand by the trend analysis according to the housing unit size at apartment complexes in Daegu city was gotten through this study. But, in order to get more accurate estimating formula, it should be based on data of funker research and investigation about apartment complexes and it should be studied continuously.

Comparison of Heat Transfer in Both the Riser and Downcomer of a Circulating Fluidized Bed

  • Hassanein, Soubhi A.;Dahab, O.M.
    • 한국연소학회:학술대회논문집
    • /
    • 2004.11a
    • /
    • pp.24-32
    • /
    • 2004
  • The characteristics of heat transfer from horizontal cylinder immersed in both a riser and downcomer of a circulating fluidized beds were investigated experimentally under different values of solids mass flux, superficial air velocity, particle size diameter, and different bed materials. The test results indicated that local heat transfer coefficients in both riser and downcomer are strongly influenced by angular position, and mass flux, as well as by particle size and bed materials. The local heat transfer coefficients around a circumference of the cylinder inside a riser and downcomer of a CFB exhibited a general tendency to increase with decreasing particle size and increasing solids mass flux and vary with different bed materials. Also the averaged heat transfer coefficient calculated from local heat transfer coefficient exhibited the same trend as a local i.e increase with decrease particle size and increasing solids mass flux and vary with varying bed materials. The general trend for a riser local heat transfer coefficient is decrease with increase angle until ${\Phi}$ = 0.5-0.6 (Where at angle =180$^{\circ}$ ${\Phi}$ =1). Also the general trend for a local heat transfer coefficient in downcomer is to increase with increase the angle until ${\Phi}$= ${\theta}/{\Pi}$ = 0.3-0.5 (Where at angle =180$^{\circ}$ ${\Phi}$ =1). Comparison the results of the heat transfer in the riser and downcomer of a circulating fluidized beds shows that they have approximately the same trend but the values of heat transfer coefficients in riser is higher than in downcomer.

  • PDF

A Study of Discriminant Analysis about Korean Quick Response System Adoption (국내(國內) 신속대응(迅速對應)시스템 도입업체(導入業體)의 판별분석(判別分析) 연구(硏究))

  • Ko, Eun-Ju
    • Journal of Fashion Business
    • /
    • v.4 no.3
    • /
    • pp.103-114
    • /
    • 2000
  • The purpose of this study was to test the discriminant analysis model of Quick Response system and to examine the detailed relationship between each discriminant factor and Quick Response adoption. In this discriminant analysis model of Quick Response system, firm size, strategic type, product category, fashion trend, selling time and the Quick Response benefits were included as discriminant factors. Onehundred and two subjects were randomly selected for the survey study and discriminant analysis, descriptive analysis, t-test, and x square test were used for the data analysis. The results of this study were: 1. Wilks Lambda and F value support the discriminant analysis model that, taken together firm size, strategic type, product category, fashion trend, selling time and the Quick Response benefits significantly help to explain Quick Response adoption. 2. The importance of discriminant ability was, in order, firm size, the Quick Response benefits, women's wear, fashion trend, analyzer, selling time, reactor, defender and men's wear. 3. The discriminant function had the high hit ratio, so this can be well used for the classification of Quick Response adoption/nonadoption.

  • PDF

A Study on Stock Trend Determination in Stock Trend Prediction

  • Lim, Chungsoo
    • Journal of the Korea Society of Computer and Information
    • /
    • v.25 no.12
    • /
    • pp.35-44
    • /
    • 2020
  • In this study, we analyze how stock trend determination affects trend prediction accuracy. In stock markets, successful investment requires accurate stock price trend prediction. Therefore, a volume of research has been conducted to improve the trend prediction accuracy. For example, information extracted from SNS (social networking service) and news articles by text mining algorithms is used to enhance the prediction accuracy. Moreover, various machine learning algorithms have been utilized. However, stock trend determination has not been properly analyzed, and conventionally used methods have been employed repeatedly. For this reason, we formulate the trend determination as a moving average-based procedure and analyze its impact on stock trend prediction accuracy. The analysis reveals that trend determination makes prediction accuracy vary as much as 47% and that prediction accuracy is proportional to and inversely proportional to reference window size and target window size, respectively.

A Case Study on the Entry-Level Housing Trends in American Suburbs (미국 동북부 교외 저소득층 주택경향에 관한 사례 연구)

  • 진정화
    • Journal of the Korean housing association
    • /
    • v.11 no.1
    • /
    • pp.37-44
    • /
    • 2000
  • The purpose of this research is to examine the evolution of low-cost sales housing and give suggestions for the future housing for the 21st century. This paper investigates the trends of low-cost suburban housing since world War II, as examplified by the Levitt housing in the Northeastern regions of the States. This research analyzes the trends of 14 variables including total floor area. lot size, living room size, kitchen size, mean bedroom size, master bedroom size, number of bedrooms, number of bathrooms, family room, garage, number of story, appliances and features, values, and values per sq ft. Nine entry-level houses were chosen as cases for comparative purpose at different points in time from 1940's to 1990's. This research finds that house sizes have been grown until 1960s, but this trend has reversed with shrinking economy and changing family lifestyles. The trend for smaller housing equipped with several features and convenient equipments will be continued for the next decades to come.

  • PDF

Next Generation AMLCD Production Technologies for Large Substrate

  • Ohta, Takashi
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 2001.08a
    • /
    • pp.3-8
    • /
    • 2001
  • This paper will review the state of the latest development of AMLCD manufacturing facilities for large Substrate and discuss the future technologies. The trend of the display size enlargement of Note book PC has hauled the enlargement of the mother glass substrate in past 10 years. The enlargement of a substrate size has brought about the productivity improvement of the TFT panel with process innovation as yet. Will this trend be continuing hereafter too? The issues of the processing and facilities related with the large square substrate and mask step reduction will be overviewed and the future processing and facilities will be discussed.

  • PDF