• Journal of Information Processing Systems
• /
• v.8 no.3
• /
• pp.445-458
• /
• 2012

Image feature extraction is one of the basic works for biometric analysis. This paper presents the novel concept of application of ridgelets for iris recognition systems. Ridgelet transforms are the combination of Radon transforms and Wavelet transforms. They are suitable for extracting the abundantly present textural data that is in an iris. The technique proposed here uses the ridgelets to form an iris signature and to represent the iris. This paper contributes towards creating an improved iris recognition system. There is a reduction in the feature vector size, which is 1X4 in size. The False Acceptance Rate (FAR) and False Rejection Rate (FRR) were also reduced and the accuracy increased. The proposed method also avoids the iris normalization process that is traditionally used in iris recognition systems. Experimental results indicate that the proposed method achieves an accuracy of 99.82%, 0.1309% FAR, and 0.0434% FRR.

• Journal of Power Electronics
• /
• v.12 no.5
• /
• pp.830-841
• /
• 2012

Active power filters (APF) can be employed for harmonic compensation in power systems. In this paper, a fuzzy based method is proposed for identification of probable APF nodes of a radial distribution system. The modified adaptive particle swarm optimization (MAPSO) technique is used for final selection of the APFs size. A combination of Fuzzy-MAPSO method is implemented to determine the optimal allocation and size of APFs. New fuzzy membership functions are formulated where the harmonic current membership is an exponential function of the nodal injecting harmonic current. Harmonic voltage membership has been formulated as a function of the node harmonic voltage. The product operator shows better performance than the AND operator because all harmonics are considered in computing membership function. For evaluating the proposed method, it has been applied to the 5-bus and 18-bus test systems, respectively, which the results appear satisfactorily. The proposed membership functions are new at the APF placement problem so that weighting factors can be changed proportional to objective function.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.684-685
• /
• 2006

In the present study, the powder metallurgical fabrication of $Bi_{0.4}Te_3Sb_{1.6}$ thermoelectric materials has been studied with specific interest to control the microstructure by the mechanical grinding process. The $Bi_{0.4}Te_3Sb_{1.6}$ thermoelectric powders with a various particle size distribution were prepared by the combination of the mechanical milling and blending processes. The specific electric resistivity of the $Bi_{0.4}Te_3Sb_{1.6}$ sintered bodies mainly depended on the orientation of the crystal structure rather than the particle size of the raw powders.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.418-419
• /
• 2006

In the present, the focus is on the synthesis of nanostructured TiC/Co composite powder by the spray thermal conversion process using titanium dioxide powder has an average particle size of 50 nm and cobalt nitrate as raw materials. The titanium-cobalt-oxygen based oxide powder prepared by the combination of the spray drying and desalting methods. The titanium-cobalt-oxygen based oxide powder carbothermally reduced by the solid carbon. The synthesized TiC-15wt.%Co composite powder at 1473K for 2 hours had an average particle size of 150 nm.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1997.10a
• /
• pp.20-25
• /
• 1997

Magnetic bearings have been widely used to support rotors without any physical contact. This however, requires the control of five degrees-of-freedom and needs a separate driving motor. This paper introduces selfbearing motors which use the combination of a rotary motor and a magnetic bearing. These motors are suitable for use in high speed rotor or in special circumstances because they are small in size and can replace the contact components. The radial type one has the merit of being small in size and capable of controlling two degrees-of-freedom in x and y directions. The axial type motor controls only one degree-of-freedom in z direction. Theoretical background of the functions, of the motor and magnetic bearing will also be introduced. New research works are reviewed and the application in rotary blood pump is discussed.

• Structural Engineering and Mechanics
• /
• v.73 no.4
• /
• pp.463-479
• /
• 2020

This paper is aimed to address a simultaneous optimization of the size, shape, and topology of steel lattice towers through a combination of the radial basis function (RBF) neural networks and the artificial bee colony (ABC) metaheuristic algorithm to reduce the computational time because mere metaheuristic optimization algorithms require much time for calculations. To verify the results, use has been made of the CIGRE Tower and a 132 kV transmission towers as numerical examples both based on the design requirements of the ASCE10-97, and the size, shape, and topology have been optimized (in both cases) once by the RBF neural network and once by the MSTOWER analyzer. A comparison of the results shows that the neural network-based method has been able to yield acceptable results through much less computational time.

• Korean Journal of Materials Research
• /
• v.24 no.10
• /
• pp.520-525
• /
• 2014

Effects of Cu and B on effective grain size and low-temperature toughness of thermo-mechanically processed high-strength bainitic steels were investigated in this study. The microstructure of the steel specimens was analyzed using optical, scanning, and transmission electron microscopy; their effective grain size was also characterized by electron back-scattered diffraction. To evaluate the strength and low-temperature toughness, tensile and Charpy impact tests were carried out. The specimens were composed of various low-temperature transformation products such as granular bainite (GB), degenerated upper bainite (DUB), lower bainite (LB), and lath marteniste (LM), dependent on the addition of Cu and B. The addition of Cu slightly increased the yield and tensile strength, but substantially deteriorated the low-temperature toughness because of the higher volume fraction of DUB with a large effective grain size. The specimen containing both Cu and B had the highest strength, but showed worse low-temperature toughness of higher ductile-brittle transition temperature (DBTT) and lower absorbed energy because it mostly consisted of LB and LM. In the B-added specimen, on the other hand, it was possible to obtain the best combination of high strength and good low-temperature toughness by decreasing the overall effective grain size via the appropriate formation of different low-temperature transformation products containing GB, DUB, and LB/LM.

• Korean Journal of Plant Resources
• /
• v.26 no.6
• /
• pp.709-717
• /
• 2013

The objective of this study was to examine the effect of root pruning intensity in combination with different initial seedling size on the growth of transplanting seedlings of Quercus acutissima. One-year-old seedlings were divided into three groups depending on their height, i.e. small (< 15 cm), medium (25-35 cm) and large size (35 cm <). Root of seedlings was pruned by three intensity such as, leaving 5 cm (severe), 10 cm (medium) and 15 cm (light) of taproot from the root-collar. After one year, we investigated survival rate, height and root-collar diameter (RCD) increment and final shoot dry weight. Also we measured characteristics of newly developed lateral roots such as number, total length, dry weight and diameter. Severe root pruning showed the lowest survival rate in all seedling size. Height increment, RCD increment and shoot dry weight were decreased with increasing intensity of root pruning. Seedlings of medium and light root pruning showed similar above-ground growth and dry weight of lateral roots. More large seedlings showed good survival rate, height increment and final shoot dry mass in all root pruning intensity. Therefore, one-year-old seedlings of Q. acutissima should be pruned taproot by 10 cm and transplanted to obtain excellent performance and increase the efficiency of transplanting work. Based on the findings of this study, it is important that applying to different root pruning intensity depending on initial seedling size for producing 2-year-old seedlings with excellent growth and high quality.

• Fashion & Textile Research Journal
• /
• v.22 no.3
• /
• pp.378-385
• /
• 2020

The purpose of this study was to present basic data for development of shoe last suitable for women of plus size (BMI 25 kg/㎡ or higher) by type and to analyze the characteristics of each type of foot type. The results of the study are as follows. A comparison of the feet of a plus-size woman and a normal-weight woman showed that the feet of a plussize woman were thicker and wider in the toes, cheeks and feet than those of a normal-weight woman, while the ankle area was thicker. As a result of the cluster analysis by type of foot type of plus-size woman, type 1 was classified into four types, type 1 was 49 (19.5%), type 2 was 43 (17.1%), type 3 was 53 (21.1%), and type 4 was distributed among 106 (42.2%). Type 1 appeared to be a long, low heel, thick foot and wide H-type, and Type 2 appeared to be a D-type with a low heel and a thinner and narrow foot compared to other types, but with wide outer width of the foot. Type 3 showed short feet, low heels, narrow feet, but slanted sides, and Type 4 showed type A with long feet, high heels, thick and wide feet or a combination of toes.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.3 s.168
• /
• pp.115-122
• /
• 2005

As the digital TV markets rapidly growing, many manufacturers introduce large size flat screen TV units. There are two different display types available to large size models which are plasma and TFT-LCD. Since both are constructed with thin large panels that are mostly fragile to even moderate mechanical shock inputs. Some large size panels are severely resonated by the acoustic sound generated TV which deteriorates video quality. Recognizing the potential problems of large displays, accurate measurement of the panels is to be an essential task for the reliable design. Measurement of mechanical properties of a thin large crystallized panel such as TFT-LCD display with traditional material testing equipments is challenging. Since TFT-LCDs are constructed with combination of brittle glass panels, polymer sheets, and liquid crystal, their properties are not only anisotropic but also usually non-linear. Accurate measurement of the properties often requires very expensive facilities. Especially when the size of the test sample is as large as 40-inch or wider, direct measurement cost is prohibitive. Even worse, machining of the large TFT-LCD to make a smaller size specimen that could be fit into a material tester is not possible because of liquid crystal leakage. A new method fer the measurement of elastic modulus of large TFT-LCD panel is presented in this article. The suggested method provides a simple, economic, and user-friendly way fer measuring the elastic modulus of large panels with considerable level of accuracy.