• 한국표면공학회지
• /
• 제41권6호
• /
• pp.287-291
• /
• 2008

Reactively magnetron sputtered TiN films were deposited on Si wafers under varying bias voltage and characterized by X-ray diffraction, field-emission scanning electron microscopy and Nanoindentation. The films deposited under an Ar + $N_2$ atmosphere exhibited a mixed (200)-(111) orientation with a strong (200) texture, which subsequently changed to a strong (111) texture with increasing bias voltage. The changes in texture and grain size of the TiN thin films are due to one or a combination of factors such as strain energy, surface free energy, surface diffusivity and adatom mobility. The influence of each factor depends on the processing conditions. The average deposition rate and grain size were calculated from FE-SEM images of the films indicating that the deposition rate was lower at the films deposited under bias voltage.

• 산업경영시스템학회지
• /
• 제35권3호
• /
• pp.129-135
• /
• 2012

Companies strive for quality improvement and use process data obtained through measurement process to monitor and control the process. Measurement data contain variation due to error of operator and instrument. The total variation is sum of product variation and measurement variation. Gage R&R is for repeatability and reproducibility of measurement system. Gage R&R study is usually conducted to analyze the measurement process. In performing the gage R&R study, several parameters such as the appropriate number of operators (o), sample size of parts (p), and replicate (r) are used. In this paper we propose how to determine the optimal combination of number of operators (o), sample size of parts (p), and replicates (r) considering measurement time and cost by statistical method.

• 한국정밀공학회지
• /
• 제31권6호
• /
• pp.535-541
• /
• 2014

In this research, three degree-of-freedom parallel spherical robot is developed for an artificial eyeball. The proposed system is comprised of a moving and a base plate, three prismatic actuators, and a ball joint for an angular movement of the moving plate. The vector analysis is employed to investigate the relationship between positions of the actuators and a pose of the moving plate. The required ranges for every actuators are calculated using the derived inverse kinematics in regard to the combination of two different levels for the size of the system component. Then the size of every components is determined from the analyzed trend. PI controller is employed for the position control of the moving plate. Finally the proposed system is verified using an arbitrary path of the angular movement.

• 천문학회보
• /
• 제38권1호
• /
• pp.47.2-47.2
• /
• 2013

We have performed a set of high-resolution simulations of nuclear star-forming ring that results in an inward gas migration from the galactic disk. Our simulations consider gas heating/cooling, star formation, and supernova feedback. The galactic potential was obtained from a snapshot of a 6.3 million particle simulation of a galactic disk at 1 Gyr, which manifests spiral arms and pseudo-bulge. The potential was modeled with a combination of 3-dimensional spherical (for the pseudo-bulge) and 2-dimensional cylindrical (for the disk) multipole expansion technique. With such a potential model, one can easily set up various realistic 3-dimensional potential models by slightly changing the expansion coefficients. We have performed a set of simulations with a few million gas particles covering the central ~6 kpc of the disk for different pseudo-bulge sizes and non-axisymmetry, and we report the dependence of the gas inflow rate, size of the star-forming ring, and star-formation rate in the ring on the size and strength of the non-axisymmetry in the bulge.

• Journal of the Korean Data and Information Science Society
• /
• 제15권2호
• /
• pp.467-476
• /
• 2004

Recently, an approximation of a wavelet series has been developed in the analyses of an unknown function. Most of articles have been studied on thresholding and shrinkage methods for its wavelet coefficients based on (non)parametric and Bayesian methods when the sample size is considered as a maximum resolution in wavelet series. In this paper, regardless of the sample size, we are focusing only on the choice of a maximum resolution in wavelet series. We propose a Bayesian approach to the choice of a maximum resolution based on the linear combination of the wavelet basis functions.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2018년도 전력전자학술대회
• /
• pp.105-107
• /
• 2018

This paper presents a new hybrid multilevel converter topology, which consists of a combination of the series connected switched capacitor units with boost ability, and an H-bridge with T-type bidirectional switches. The proposed converter boosts the input voltage without any bulky inductors, and has the small number of components, which can make the size and cost of a power converter greatly reduced. The output filter size and harmonics are also reduced by the high quality multilevel output. In addition, there is no need for complicated methods to balance the capacitor voltage. Simulation and experimental results with a nine-level converter system are presented to validate the proposed topology and modulation method.

• 대한기계학회논문집B
• /
• 제24권5호
• /
• pp.718-724
• /
• 2000

A model for depicting the rocket engine combustion process is presented and several experiments near a design point are provided with a FOOF type of unlike impinging injector for a propellant combination of Jet A-1 fuel and liquid-oxygen. The model is based on the assumption that the vaporization is the rate-controlling combustion process. The effects of initial drop size and initial drop velocity are systematically shown and discussed. It is seen that in the midst of considered parameters the change of initial drop size is more sensitive to the performance. The proposed model describes qualitative trends of combustion process well despite of its simplicity.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제2권2호
• /
• pp.239-245
• /
• 2013

Modern electric controlled valves are demanded that its solenoid actuator should be smaller size, lighter weight, lower consumption power, and higher response time. For achieving these purposes, the major design factors of solenoid actuator such as magnetic flux density, coil turn numbers, plunger size, bobbin dimension, and etc. are must be optimized. In this study, for optimal design of high speed solenoid actuator for hydraulic servo valve operation, we draw up governing equations which are composed by combination of electromagnetic theories and empirical knowledge, and deduct the values of major design factors by use of them. For more increase the operating speed, voice coil are used as main armature in manufacturing of prototype actuator. And, we have proven the propriety of the governing equations and speed increasing method by experiments using the hydraulic valve assembly adopted the prototype of solenoid actuator.

• 한국컴퓨터정보학회논문지
• /
• 제4권3호
• /
• pp.47-52
• /
• 1999

마이크로 프로세서와 DSP(Digital Signal Process)의 성능에 매우 중요한 역할을 하는 가산기는 어떠한 캐리 생성 방식을 적용하느냐에 따라 그 성능이 크게 좌우된다. 이에 본 논문에서는 연산속도 면에서 우수한 캐리 륵어헤드 방식(Carry Look-ahead Algorithm)과 면적 면에서 우수한 캐리 선택 방식(Carry Select Algorithm)을 이용하였으며, 이 두 방식의 최적조합을 적용하여 고속 64비트 가산기를 설계하였다. 따라서 본 논문은 연산속도와 면적을 모두 개선한 최적의 CLSA(Carry Look-ahead Select Adder) 방식을 제안하였으며. 시뮬레이션을 통하여 설계된 회로의 우수성을 입증하였다.

• 대한가정학회지
• /
• 제34권3호
• /
• pp.123-136
• /
• 1996

This report deals with the relations between the vibration restraint and the stress-strain properties of the stretch fabrics. For this purpose, a survey was carried out about the preferences in sports-brassiere. Six experimental sports-brassieres of an equal design, but of different materials were tested for vibration using an accelerometer and a motion analyzer while the subject is jogging. 1. The results of the survey on sports-brassiere preferences are as follows; Preferable factors are simple design, shield and close adhesion of sports brassiere. Dissatisfied factors on the sports-brassiere are drooping, vibrating of the breast, itching and wetting. The B-cup-size group perceive the bigger vibration and drooping than A-cup-size. 2. The results of the wearing tests are as follow; This experiment shows the vibration restraint effects on different stretch fabrics, such as hard, medium and soft nature. There was a linear relationship between the vibration restraint and combination of different types of stretch fabrics. Among different brassiere types, the 2-layered brassiere (inner layer of high tension fabric and outer layer of lower stretch fabric) showed the least vibration. In the case of 2-lay brassiere, the wearing comfort rate was highest.