• Steel and Composite Structures
• /
• v.15 no.2
• /
• pp.151-162
• /
• 2013

In this study, an electrolyzing device for the production of metal powders was designed and fabricated. The production of copper powders was performed using a variety of current densities, anode-cathode distances and power removal times. The effect of these parameters on powder particle size and shape was determined. Particle size was measured using a laser diffraction unit while the powder shape was determined by SEM. Experimental results show that an increase in current density leads to a decrease in powder particle size. In addition particle shape changed from globular dendritic to acicular dendritic with increasing the current density. Distance between the cathode and anode also showed a similar influence on powder particle size and shape. An increase in time of powder removal led to an increase in powder particle size, as the shape changed from acicular dendritic to globular dendritic.

• Journal of Fashion Business
• /
• v.15 no.1
• /
• pp.63-79
• /
• 2011

This study examines the relationship between breast shape and brassiere construction through the comparative analysis of brassiere pattern on the breast shape. This researcher drew the brassiere pattern of developing a pre-study for Chinese female adults according to average size based on the four breast shapes. And then we measures brassiere pattern size and comparatively analyzes breast between size and shape. Comparative analysis results of brassiere patterns are verified differences of size and shape on the breast shape. Above all an angle of cup dart showed remarkable differences on the breast shape. An angle of cup dart isn't proportioned to breast size. An angle of cup dart for cone shape is bigger than dome shape. Because cone shape breast is protruded center part but dome shape breast have a shape of smooth curve like a half globe. So an angle of a cone shape breast cup dart is determined bigger than dome shape breast. For increasing the uplift effect of brassiere, brassiere pattern is different on the breast shape. And a brassiere pattern need different drawing methods about the angle of cup dart, breast inner side diameter, slope and so on. This study has an important significance that it established a mechanical relationship of breast shape and brassiere pattern.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.702-703
• /
• 2006

The particle size distribution and shape are among the important parameters for characterisation of quality of metal powders. Specific material properties such as ability to flow, reactivity as well as compressibility and its hardening potentials hence the most important characteristics of sintered metals - are determined by the size distribution and shape. The correct particle size distribution and particle shape information are the key to best product quality in atomisation processes of aluminium, milling of pure metals and other processes. This paper presents state-of-the-art technology for characterization of particle size distribution and shape.

• Advances in materials Research
• /
• v.3 no.4
• /
• pp.199-216
• /
• 2014

Noble metal nanoparticles (mainly Au, Ag, Pt and Pd) have received enormous attention owing to their unique and fascinating properties. In the past decades, many researchers have reported methods to control the shape and the size of these noble metal nanoparticles. They have consequently demonstrated outstanding and tunable properties and thus enabled a variety of applications such as surface plasmonics, photonics, diagnostics, sensing, energy storage and catalysis. This paper focuses on the recent advances in the solution-phase synthesis of shape- and size-controlled noble metal nanoparticles. The strategies and protocols for the synthesis of the noble metal nanoparticles are introduced with discussion of growth mechanisms and important parameters, to present the general criteria needed for producing desirable shapes and sizes. This paper reviews their remarkable properties as well as their shape- and size- dependence providing insights on the manipulation of shape and size of metal nanoparticles, necessary for appropriate applications. Finally, several applications using the shape- and size-controlled noble metal nanoparticles are highlighted.

• Korean Journal of Human Ecology
• /
• v.23 no.6
• /
• pp.1171-1189
• /
• 2014

In order to provide the basic data for creating the environment which can efficiently reflect prefer fit along with body size when selecting clothes size in the indirect purchasing environment, this study analyzed the difference of ready-made jacket part-specific fit preferred by fashion models in their twenties and female college students. This study was to analyze the impact of body size, recognition of body part-specific characteristics shape, body satisfaction on prefer fit of jacket. As for the difference of prefer fit depending on the body size, female college students preferred more loose fit than models. The difference according to recognition of body part-specific characteristics shape turned out to be significant for prefer fit depending on the degree of bend of neck, arm length, bend of back recognition and matching fit was found to be preferred as they recognize their body shape to be normal and the difference according to body satisfaction appeared to be significant in the terms of bend of back, hip width/protrusion, torso size/length, sleeve length, whole body shape and they turned out to prefer matching fit as they are satisfied with their body. As shown above, body size, recognition of body part-specific characteristics shape, especially body satisfaction have a great influence on prefer fit of jacket and therefore, if preparing for a size selection step according to body shape and satisfaction in the jacket size selection process, customers' satisfaction in jacket size may be improved and it is considered to be helpful for both consumers and sellers.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.10
• /
• pp.1443-1454
• /
• 2002

The purposes of this study were to classify body type of adult males into several kind of shape and to provide the characteristics of size of each group which has same shape. As the sample, subjects were 1290 males of 20 to 54 year-old. The procedure and results were follows; 1. As the result of the previous reserch, the front line of body was classified in X, H, Y and A types. 2. The principal component analysis was used to obtain the shape factor of the side line of the trunk. 9 factors in the side were extracted. As the result of the cluster analysis of factor scores, the side line of body was classified in 5 types. It was named X, A, Y and H type in the front and S, D1, d, I and D2 type in the side. 3. In order to consider the shape of body as a whole, the body shape of the front and side were compounded. The whole body shapes of adult male were very various, and 6 body shapes, XS, YS, Yd, YI, AD2 and HD1 were selected as the basic types. In each type of body, several groups were classified by size factor, height and chest girth and master size was selected considering appearance frequency.

• 한국공간정보시스템학회:학술대회논문집
• /
• 2004.05a
• /
• pp.43-52
• /
• 2004

The objective of this study is the development of size, shape and topology discrete optimum design algorithm which is based on the genetic algorithms. The algorithm can perform both shape and topology optimum designs of trusses. The developed algerian was implemented in a computer program. For the optimum design, the objective function is the weight of trusses and the constraints are stress and displacement. The basic search method for the optimum design is the genetic algorithms. The algorithm is known to be very efficient for the discrete optimization. The genetic algorithm consists of genetic process and evolutionary process. The genetic process selects the next design points based on the survivability of the current design points. The evolutionary process evaluates the survivability of the design points selected from the genetic process. The efficiency and validity of the developed size, shape and topology discrete optimum design algorithms were verified by applying the algorithm to optimum design examples

• Korean Journal of Human Ecology
• /
• v.9 no.4
• /
• pp.459-469
• /
• 2000

The purpose of this study is to investigate the Myokmok, a kind of shroud. This study classifies Myokmok by its size, shape, cloths and color. Korean Myokmok through literatures are as follows. The size of Myokmok was one Ch'ok(尺) two Ch'on(寸). The surface of Myokmok were mostly black and the lining was mostly red. The cloths of Myokmok were Paek(帛) and Chu(紬). Myokmok through relics was various in size and the cloths were Kongdan(貢緞), Myongchu(明紬) and the color was various. Actual conditions of current Myokmok were various. The size, shape and cloths were more variable than the literatures and relics. In the Chinese Myokmok through literatures, the size were one Ch'ok two Ch'on, one Ch'ok and one Ch'ok five Ch'on. The cloths of Myokmok were Paek and Kyon(絹). The surface of Myokmok were mostly black and the lining was mostly red. Myokmok in Munkonggaryoieuichul was tide by the strings of four corners. The size of the Chinese Myokmok was various. The shape of the current Myokmok was various than the literatures and relics.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.616-619
• /
• 2000

The optimum design of a structure requires to determine economical member size and shape of a structure which satisfies the design conditions and functions. In this study, it is attempted to minimize a dead weight of the bogie frame. Therefore, shape optimization is performed for a bolster rib at first and then size optimization for the thickness of top and bottom plate. For the efficient reduction of a weight of a bogie frame, various ellipses centered at a centroid of a bolster rib are made and tried. For the shape optimization, a major axis and an eccentricity of an ellipse are chosen as design variables. From the numerical results of shape and size optimization of a bogie frame, it is known that the weight can be reduced up to 12.476 Y4717.21 kg) with displacement and stress constraints.

• Journal of the Korean Society of Costume
• /
• v.44
• /
• pp.104-116
• /
• 1999

This study was intended to make an inquiry into the effect of lines, shapes and colors (achromatic colors) as apparel design elements on the perceptions of facial size, brightness and shape through an empirical research based on the theories of visual perception and optical illusion that have been studied in Gestalt Psychology, which becomes the basis of apparel design principles. It was shown that the facial size was influenced by the collar size, the degree of neckline cut, and the thickness of the trimming line. The white scarf with the white jacket made the face look darkest while the black scarf with the black jacket made the face look brightest. When the neckline had the characteristic of the line contrasted with the facial shape, the oval-shaped face was perceived to be the most ideal. When the facial shape and the neckline shape were similar, the facial shape was perceived to be more highlighted.