• Journal of Conservation Science
• /
• v.31 no.3
• /
• pp.255-265
• /
• 2015

In this study, the potash glass beads of 281 samples in 30 sites analyzed until now were classified according to the chemical composition. And the color, size, manufacturing technique and distribution period were compared. Korea potash glass beads are divided into 3 types depending on the stabilizer content. I, II type is the CaO and $Al_2O_3$ content of less than 5%. Relatively, I type has a high CaO and II type has a high $Al_2O_3$. In contrast, III type comprises more than CaO 5%. I, II type is the saltpetre, III type is estimated using plant ash as row material of flux. A review of the properties by type, I type is cobalt blue, copper blue and purple beads. The outer diameter is sized to the range 1.4~7.4mm. Also it was produced by the drawing technique. It was used continuously from BC 1C until around AD 6C. On the other hand, II type is outer diameter of 1.9~3.6mm and a copper blue beads. manufacturing technique is the same as the I type. This seems to have been in use since around AD 1C to 4C. Finally, III type is brown, colorless, amber beads and an outer diameter of about 10mm. It was formed by winding technique and appeared in the tombs of Goryeo and Joseon Dynasty. As a result, 3 types of potash glass beads distributed in Korea is likely to flowing through the various trade routes from different provenances.

• Journal of the Mineralogical Society of Korea
• /
• v.28 no.2
• /
• pp.95-108
• /
• 2015

Nano-sized iron colloids are formed as acid mine drainage is exposed to surface environments and is introduced into surrounding water bodies. These iron nanomaterials invoke aesthetic contamination as well as adverse effects on aqueous ecosystems. In order to control them, the characteristics of their behaviour should be understood first, but the cumulative research outputs up to now are much less than the expected. Using zero-valent iron (ZVI) and magnetite, this study aims to investigate the behaviour of iron nanomaterials according to the change in the composition and pH of background electrolyte and the concentration of natural organic matter (NOM). The size and surface zeta potential of iron nanomaterials were measured using dynamic light scattering. Characteristic behaviour, such as aggregation and dispersion was compared each other based on the DLVO (Derjaguin, Landau, Verwey, and Overbeek) theory. Whereas iron nanomaterials showed a strong tendency of aggregation at the pH near point of zero charge (PZC) due to electrostatic attraction between particles, their dispersions became dominant at the pH which was higher or lower than PZC. In addition, the behaviour of iron nanomaterials was likely to be more significantly influenced by cations than anions in the electrolyte solutions. Particularly, it was observed that divalent cation influenced more effectively than monovalent cation in electrostatic attraction and repulsion between particles. It was also confirmed that the NOM enhanced the dispersion nanomaterials with increasing the negative charge of nanomaterials by coating on their surface. Under identical conditions, ZVI aggregated more easily than magnetite, and which would be attributed to the lower stability and larger reactivity of ZVI.

• Journal of Navigation and Port Research
• /
• v.39 no.3
• /
• pp.233-239
• /
• 2015

Recently, Due to variable marine accident occurred, problems relating to marine accidents have been raised. Of these accidents, designated anchorage of Korea coastal port, spcially open-sea anchorage, occurred dragging anchor and accidents are likely, due to failure to obtain a valid ship's holding power so that it is the situation unsatisfactory that ensuring the safety of the anchored ship and anchorage systematic safety management stadars for the efficent operation of the anchorage. also in case of open-sea anchorage vulnerable to external force of certain conditions due to geographical location and topographical characteristics of the port, accidents are likely dragging anchor by typoon or suddenly strong wind and secondary accidents are concerned. This paper shows standard of limit external force to ensure the safety anchorage each of ship's size through review marine accidents on Pohang port, also it is determined to be used as a basic reference for anchoring safety and efficient anchorage management.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.1
• /
• pp.453-461
• /
• 2015

The aim of this study was to find out the relationship between hospital structural factors and nurses' turnover rate. Nurse turnover rate and the hospital's characteristics was using Statistics for Hospital Management Data of Korean Health Industry Development Institute. The data were reported 247 hospitals in 2008 all over the country. The turnover rate among nurses was 32.0% in Korea as of 2008; those factors actually affecting the rate included whether the hospital was managed publicly or privately, the hospital size, region, the average salary for nurses, and the number of nurses per 100 beds. While each hospital had the turnover rate correlated with the total number of beds (r=-.322), the average salary for nurses(r=-.186) and the number of nurses per 100 beds (r=-.390), variables explaining the turnover rate were whether the hospital was managed publicly or privately, the number of beds, and the number of nurses per 100 beds ($R^2=.257$). In conclusion, nurses working in a privately-managed hospital and hospitals which had a smaller number of beds and which had a smaller number of nurses per 100 beds showed a higher turnover rate. Further study is required to elucidate the factors of the nurses' turnover.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.23 no.4
• /
• pp.74-85
• /
• 2015

Recently, the number of anaerobic digestion facility for livestock manure is on the rise in Korea. All of the livestock manure anaerobic digestion facilities in operation use pig manure slurry as a substrate for anaerobic digestion. Generally, pig manure slurry is composed of 97% water and 3% solids. The particulate matter, such as corn in the form of particles that is undigested by pig is contained in the pig manure slurry. Particulate matter is a factor reducing the effectiveness of biogas production in the anaerobic digestion process. In this study, mechanical grinding treatment was applied to analyze the effect of methane production from pig manure slurry by reducing the particle size of the slurry. On the other hand, the effect of the solid concentration levels on methane production and methane content of the biogas was analyzed. The fine particle concentration in the pig manure slurry was increased by the mechanical grinding treatment. And methane production and methane content of the biogas were higher in grinded pig manure slurry than untreated raw slurry.

• Journal of Technology Innovation
• /
• v.23 no.3
• /
• pp.341-372
• /
• 2015

While creativity and innovation is the key to drive the creative economy in the South Korea, the development of analysis framework to evaluate the size and performance is limited. The present study suggests a framework and a method to assess economic impact of the creative economy using inter-industry analysis which employs input-output efficiencies populated by the Korean Bank and empirical data from the national informatization survey conducted by the National Information-society Agency(NIA). The results indicated that, as of 2013, despite of economy downturn, the creative innovation based on the information communication technology(ICT) had been significantly led the production, value-added, and employment inducement. The effect is predominant in the creative industry in an broad sense, that is, technology intensive manufacturing industry. Theoretical and policy implications are discussed.

• Research in Plant Disease
• /
• v.21 no.1
• /
• pp.36-39
• /
• 2015

In June 2012 and 2013, a destructive stem rot symptoms of Ligularia fischeri occurred sporadically in Hoengseong-gun and Pyeongchang-gun Gangwon-do, Korea. The typical symptom included water-soaking on the main stem, rotting, wilting and blighting, which eventually leads to death of the plant. White mycelial mats were spread over lesions and brown sclerotia were formed on stems and near soil surface. The sclerotia were white to brown, spherical or irregular, 1-3 mm in size on potato dextrose agar (PDA), The optimum temperature range of hyphal growth was $25-30^{\circ}C$ and the hyphal diameter was $4-10{\mu}m$. The typical clamp connections were observed in the hyphae of the fungus grown on PDA. The resulting sequence of 695 bp was deposited in GenBank. A BLAST search revealed that sequences of the this isolates showed >99% identity with those of Sclerotium rolfsii. On the basis of the morphological characteristics and phylogenetic analyses of molecular markers ITS rDNA, the fungi were identified as S. rolfsii. A pathogenicity test was carried out to fulfill Koch's postulates. To our knowledge, this is the first report of S. rolfsii on Ligularia fischeri in Korea.

• Journal of Broadcast Engineering
• /
• v.20 no.5
• /
• pp.697-705
• /
• 2015

This paper proposes a high-speed and high-quality haze removal method based on dual dark channels. In the conventional method, the halo artifacts are suppressed by the additional transmission refinement, but the transmission refinement is computationally intensive and the quality of the haze removal is sometimes unsatisfactory because of the residual halo artifacts. In the proposed method, the transmission is estimated with the mixture of the two dark channels with different window size. By mixing the two dark channels so as to avoid the halo artifacts, the proposed method realizes a high-quality haze removal even without the transmission refinement. Experimental results demonstrate that the quality of the results by the proposed method is superior to those by the conventional method and the speed of the haze removal is about 14.2 times higher than that of the conventional method.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.6
• /
• pp.777-783
• /
• 2015

Wood is an anisotropic material that shows the changes in hardness, quality and dimensions depending on the types of cells on three cross sections, size, array and so on. It can also be used in different ways according to its use, which requires a meticulous research, in order to maximize the utilization by understanding the nature and use; and by clarifying the theory and technologies. The research on relationship among wood's physical properties, density, and elasticity of modulus have been studied in Korea and abroad, but those studies were based on correlation gained through standardized specimen. Rather, the study on complete product is rare. Moreover, the previous reports are mostly concentrating on vibration mode and batting, though the wood's physical properties as a material have not been in the main focus. Therefore, this study will carried out for analyzing MOE through figuring material property out and comparing frequency adapting to the Canadian HardMaple bat. For comparison of material properties, we studied the annual ring and density of the bat; calculated the MOE with resonance frequency and formula (ASTM C1259); and verified the repulsive force of this material. As a result, the relevance of the resonance frequency and annual ring is weak, and in comparison in the grain direction in wood, the MOE value is higher when the grain direction in wood is excited horizontally than when is excited vertically, because the material is repulsive when grain direction is horizontal.

• Journal of the Korean Data and Information Science Society
• /
• v.28 no.6
• /
• pp.1457-1469
• /
• 2017

Private education expenses is one of the key issues in Korea and there have been many discussions about it. Academically, most of previous researches for private education expenses have used multiple regression linear model based on ordinary least squares (OLS) method. However, if the data do not satisfy the basic assumptions of the OLS method such as the normality and homoscedasticity, there is a problem with the reliability of estimations of parameters. In this case, quantile regression model is preferred to OLS model since it does not depend on the assumptions of nonnormality and heteroscedasticity for the data. In the present study, the data from a survey on private education expenses, conducted by Statistics Korea in 2015 has been analyzed for investigation of the impacting factors for private education expenses. Since the data do not satisfy the OLS assumptions, quantile regression model has been employed in Bayesian approach by using gibbs sampling method. The analysis results show that the gender of the student, parent's age, and the time and cost of participating after school are not significant. Household income is positively significant in proportion to the same size for all levels (quantiles) of private education expenses. Spending on private education in Seoul is higher than other regions and the regional difference grows as private education expenditure increases. Total time for private education and student's achievement have positive effect on the lower quantiles than the higher quantiles. Education level of father is positively significant for midium-high quantiles only, but education level of mother is for all but low quantiles. Participating after school is positively significant for the lower quantiles but EBS textbook cost is positively significant for the higher quantiles.