• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.625-628
• /
• 2008

Size-effect correction factors of the flexural test specimens, which had controled cement concrete pavement quality, were investigated and derived to be easily used in field. We couldn't find the size-effects in this size range (10, 12, 15cm) of specimens, which were made of 32mm crushed aggregates, and the theoretical verification was presented by Bazant's equations. Finally, non-dimensional chart for size-effect correction was proposed, covering the relationship between compressive strengths and w/c ratios.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.11a
• /
• pp.39-42
• /
• 2012

Pusher-Loaded Scrapers are important construction equipment for large earthmoving operations. Production rates of a Pusher-Loaded Scraper vary greatly in accordance with the temperature or elevation, the equipment performance, haul speed, haul-road conditions, the method of loading, and Number of scrapers per one pusher. Determining of most economical scrapers fleet regarding the size of equipment, model name, and number of scrapers demands time-consuming calculation because it needs to reference of varied performance charts or tables and repeat complicated calculation. In this study, decision-making support system for the Optimal Pusher-loaded Scrapers Fleet is suggested for the purpose of calculating easily and handling effectively variables which are changed depend of the work conditions. The prototype of this program is developed using MATLAB. And the Database of Pusher-loaded Scraper embodies Performance chart & Retarder chart, soil properties, and calculation-support table.

• Communications for Statistical Applications and Methods
• /
• v.10 no.3
• /
• pp.825-833
• /
• 2003

Knowing the time of the process change could lead to quicker identification of the responsible special cause and less process down time, and it could help to reduce the probability of incorrectly identifying the special cause. In this paper, we propose a maximum likelihood estimator of the process change point when a Shewhart $\bar{X}$ chart with variable sample size (VSS) scheme signals a change in the process mean. Also we build a confidence interval for the process change point by using the likelihood function.

• The Korean Journal of Applied Statistics
• /
• v.22 no.6
• /
• pp.1131-1142
• /
• 2009

We suggest a fast and accurate algorithm to compute ARLs of CUSUM chart for controling process variance. The algorithm solves the characteristic integral equations of CUSUM chart (for controling variance). The algorithm is directly applicable for the cases of odd sample sizes. When the sample size is even, by using well-known approximation algorithm combinedly with the new algorithm for neighboring odd sample sizes, we can also evaluate the ARLs of CUSUM charts efficiently and accurately. Based on the new algorithm we consider the optimal design of upward and downward CUSUM charts for controling process variance.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.6
• /
• pp.746-752
• /
• 2010

Rib structure has been used to bed and column of machine tool to heighten weight stiffness ratio, cost performance and weight saving. In this paper the bed rib structure was estimated with thermal characteristics. Using superposition principle, machine tool designer can describe every complicated heat generation in the machine tool thermal source. As thermal characteristics, thermal deformation of guide rail and column and Maximum-minimum temperature variation were selected. The size, configuration and direction against the thermal loading surface operated to the thermal characteristics. The DB chart was made following rib structure estimating thermal characteristics. With superposition principle and DB chart, machine tool designer can prognosticate the thermal characteristics without FEM analysis to every bed rib structure.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.09a
• /
• pp.863-874
• /
• 2009

The engineering characteristics and the reinforcement effect of the elephant foot method were discussed with parametric study. The elephant foot method is adopted to support the loads transferred from tunnel crown and improve bearing capacity of elephant foot in poor ground condition. The evaluation of reinforcement effect, which has the mechanical relationship between ground condition, footing size and reinforcement system, was carried out through the previous research and numerical analysis. In addition, the simple design chart was proposed to estimate the applicability of the elephant foot reinforcement method. It will be practical for the engineer to determine the optimum reinforcement method for safe tunnelling in soft ground condition.

• Proceedings of the Safety Management and Science Conference
• /
• 1999.11a
• /
• pp.247-257
• /
• 1999

There are several models for process quality assurance by quality system(ISO 9000), process capability analysis, acceptance control chart and so on. When a high level process capability has been achieved, it takes a long time to monitor the process shift, so it is sometimes necessary to develop a quicker monitoring system. To achieve a quicker quality assurance model for high-reliability process, this paper presents a model for process quality assurance when the fraction nonconforming is very small. We design an acceptance control chart based on variable quality characteristic and time-censored accelerated testing. The distribution of the characteristics is assumed to be normal of lognormal with a location parameter of the distribution that is a linear function of a stress. The design parameters are sample size, control limits and sample proportions allocated to low stress. These parameters are obtained under minimization of the relative variance of the MLE of location parameter subject to APL and RPL constraints.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.12
• /
• pp.73-82
• /
• 2020

Most process date such as semiconductor and petrochemical processes, autocorrelation often exists between observed data, but when the existing SPC(Statistical process control) is applied to these processes, it is not possible to effectively detect the average change of the process. In this paper, when the average change of a certain size occurs in the process data following a specific time series model, the average of the residuals changes according to the passage of time, and the change pattern of the average is introduced around the ARMA(1,1) process. Based on this result, the reference value required in the design process of the CUSUM (Cumulative sum) control chart is appropriately considered by considering the type of the time series model of the process data of the CUSUM control chart that can detect small mean changes in the process and the width of the process mean change of interest. It was confirmed through simulation that it should be selected and used.

• Proceedings of the Korean Society for Quality Management Conference
• /
• 2007.04a
• /
• pp.302-309
• /
• 2007

To conduct statistical process control needs the assumption that the process data are independent. However, most of chemical processes, like a semi-conduct processes do not satisfy the assumption because of autocorrelation. It causes abnormal out of control signal in the process control and misleading process capability. In this study, we introduce that Shore's method to solve the problem and to find the optimal subgroup size to estimate variance for AR(l) model. Especially, we focus on finding an actual subgroup size for small samples using simulation. It may be very useful for statistical process control to analyze process capability and to make a Shewhart chart properly.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.5 s.153
• /
• pp.779-787
• /
• 2006

Pantyhose is a close-fitting garment. Consumers are highly sensitive to any progress done in fitting their lower body and increasing comfort. However, pantyhose manufactured in Korea are only one-sized. The purpose of this study is to suggest the size designation of pantyhose, using new human body measurement data which were gained from the Year 2004 SIZE KOREA project. For the purpose of this study, the ISO standards and JIS standards were reviewed and questionnaire was carried out to manufacturers and distribution companies. The results are as follows: First, for a difference with size standards established in 2002, applicable age range was expanded from 15 to 70 year-old women to entirely include persons who wear panty hose. Secondly considering the actual condition that panty hose is producing in single size in most companies due to its elasticity of material, number of size was reduced from five to four. Thirdly basic parts of body which were applied to panty hose are height and hip girth. And size of panty hose is decided by a chart which is composed of height-axis and hip-axis.