• 한국시뮬레이션학회논문지
• /
• 제24권4호
• /
• pp.107-118
• /
• 2015

군 워게임 분야에서 많은 에이전트 협력과 관련된 연구들이 제시되었고, 그러한 연구들은 주어진 목표를 달성하기 위해 존재하는 한 팀을 이루는 모의개체간 협업을 위한 기법들을 다루고 있다. 급격히 변화하는 전장을 모의하기 위해서, 실제 전장상황에서 빈발하는 임무 인계를 반영하기 위해 하나의 모의개체는 다른 개체의 역할을 인계 받을 수 있어야 하며, 이를 위해 개체는 자신의 과업과 느슨하게 연결되어 있어야 한다. 이 요건을 만족함으로써 모의상황에서 파괴된 개체가 자신의 과업을 수행하지 못할 경우 다른 개체에게 자신의 과업을 전달하는 것을 가능케 한다. 그러나 개체와 과업간의 긴밀한 연결은 긴박한 전장상황에서의 임무 승계를 반영하는 것을 저해한다. 기존의 문제점으로서, 기존의 연구 및 워게임들은 설계단계에서 과업을 개체에 엄격하게 지정함으로써 그러한 느슨한 연계를 어렵게 한다. 이 결함을 극복하기 위해 역할기반명령계층(ROCH) 모델은 실행상태에서 개체의 주변 상황에 근거하여 역할을 동적으로 할당한다. 이 모델에서 역할(Role)은 개체와 과업을 분리한다. 본 논문에서는 하나의 개체와 다른 부하 개체들 간의 역할과의 연결이 긴밀하지 않도록 출판/구독(publish/subscribe)패턴을 활용하여 ROCH 모델을 하나의 컴포넌트로 구현한다.

• Journal of Radiation Protection and Research
• /
• 제39권2호
• /
• pp.109-117
• /
• 2014

방사선비상계획은 원자력시설에 대한 사고해석을 통해 산출한 방사선원항과 기상자료에 근거한 선량평가 결과를 기초로 비상계획이 필요한 거리를 산출하고, 비상계획이 필요한 거리 내에 거주하고 있는 거주민에 대한 옥내대피, 소개, 갑상선방호 등의 보호조치 계획을 수립하는 방식으로 이루어진다. 본 연구에서는 연구용원자로 '하나로'에서 가상할 수 있는 최대사고 조건 하에서 부지내외 거주자에 대한 보호조치 전 후의 선량변화를 1년간 기상자료에 기초하여 확률론적으로 평가하고, 국제방사선방호위원회의 2007년 권고에서 제시한, 비상피폭상황에서 보호조치 이후 잔여선량으로 정의된 참조준위 개념을 사용하여, 최적의 보호조치 유형을 도출하였다. 하나로의 경우 최대 가상사고시 최적의 보호조치 유형은 반경 300 m 이내 거주자 소개, 반경 800 m 이내 거주자 옥내대피로 평가되었으며, 갑상선방호는 반경 600 m 이내 거주자에 국한하여 해당되는데 이 지역 거주자가 소개 또는 옥내대피시는 방사능방재요원 외에 필요가 없는 것으로 평가되었다.

• 산업경영시스템학회지
• /
• 제10권16호
• /
• pp.101-106
• /
• 1987

Statistical control charts are useful tools to monitor and control the manufacturing processes and are widely used in most Korean industries. Many Korean companies, however, do not always obtain desired results from the traditional control charts by Shewhart such as the $\bar{X}$-chart, $\bar{X}$-chart, $\bar{X}$-chart, etc. This is partly because the quality charterstics of the process are not distributed normally but are skewed due to the intermittent production, small lot size, etc. In Shewhart $\bar{X}$-chart. which is the most widely used one in Kora, such skewed distributions make the plots to be inclined below or above the central line or outside the control limits although no assignable causes can be found. To overcome such shortcomings in nonnormally distributed processes, a distribution-free type of confidence interval can be used, which should be based on order statistics. This thesis is concerned with the design of control chart based on a sample median which is easy to use in practical situation and therefore properties for nonnormal distributions may be easily analyzed. Control limits and central lines are given for the more famous nonnormal distributions, such as Gamma, Beta, Lognormal, Weibull, Pareto, Truncated-normal distributions. Robustness of the proposed median control chart is compared with that of the $\bar{X}$-chart; the former tends to be superior to the latter as the probability distribution of the process becomes more skewed. The average run length to detect the assignable cause is also compared when the process has a Normal or a Gamma distribution for which the properties of X are easy to verify, the proposed chart is slightly worse than the $\bar{X}$-chart for the normally distributed product but much better for Gamma-distributed products. Average Run Lengths of the other distributions are also computed. To use the proposed control chart, the probability distribution of the process should be known or estimated. If it is not possible, the results of comparison of the robustness force us to use the proposed median control chart based oh a normal distribution. To estimate the distribution of the process, Sturge's formula is used to graph the histogram and the method of probability plotting, $\chi$$^2$-goodness of fit test and Kolmogorov-Smirnov test, are discussed with real case examples. A comparison of the proposed median chart and the $\bar{X}$ chart was also performed with these examples and the median chart turned out to be superior to the $\bar{X}$-chart.

• 한국통신학회논문지
• /
• 제40권1호
• /
• pp.96-107
• /
• 2015

네트워크(Vehicular Ad-hoc Networks; VANET) 기술은 텔레매틱스/지능형 교통시스템을 구축하여 실시간 정보를 수집 및 공유하여 교통 체증 완화, 교통사고 예방뿐만 아니라, 차량 안에서 인포테인먼트(Infotainment) 서비스를 제공한다. 요구하는 서비스 증가로, 고정된 프레임 안에서 한정된 자원을 사용하는 기존의 기술은 효율적인 차량통신 서비스에 한계가 있다. 따라서 주변 상황에 따라 유연한 동작의 프로토콜 설계와 정보를 효율적으로 인식, 예측, 분배, 공유를 할 수 있도록 적응적인 설계가 필요하다. 본 논문에서는 차량과 RSU(Road Side Units) 기반의 V2I(Vehicle to Infrastructure) 구조와 차량간 통신 V2V(Vehicle to Vehicle) 구조를 상호 결합하여 차량 통신에 할당된 자원을 보다 효율적으로 관리, 사용하기 위한 새로운 방법을 제안한다. 성능 평가를 통해 제안된 V2I/V2V 협력 스케줄 메시지 전송을 통해 높은 자원 이용률을 달성할 수 있음을 보였고, 제어정보를 넓은 범위로의 신속한 전송을 위한 최적 전송 기회 시간과 2차 릴레이 차량 전송 확률 값을 도출하였다.

• 유통과학연구
• /
• 제13권1호
• /
• pp.57-70
• /
• 2015

Purpose - Open source software has high utilization in most of the server market. The utilization of open source software is a global trend. Particularly, Internet infrastructure and platform software open source software development has increased rapidly. Since 2003, the Korean government has published open source software promotion policies and a supply promotion policy. The dynamism of the open source software market, the lack of relevant expertise, and the market transformation due to reasons such as changes in the relevant technology occur slowly in relation to adoption. Therefore, this study proposes an assessment model of services provided in an open source software service company. In this study, the service level of open source software companies is classified into an enterprise-level assessment area, the service level assessment area, and service area. The assessment model is developed from an on-site driven evaluation index and proposed evaluation framework; the evaluation procedures and evaluation methods are used to achieve the research objective, involving an impartial evaluation model implemented after pilot testing and validation. Research Design, data, and methodology - This study adopted an iteration development model to accommodate various requirements, and presented and validated the assessment model to address the situation of the open source software service company. Phase 1 - Theoretical background and literature review Phase 2 - Research on an evaluation index based on the open source software service company Phase 3 - Index improvement through expert validation Phase 4 - Finalizing an evaluation model reflecting additional requirements Based on the open source software adoption case study and latest technology trends, we developed an open source software service concept definition and classification of public service activities for open source software service companies. We also presented open source software service company service level measures by developing a service level factor analysis assessment. The Behavior-Structure-Evolution Evaluation Model (BSEM) proposed in this study consisted of a rating methodology for calculating the level that can be granted through the assessment and evaluation of an enterprise-level data model. An open source software service company's service comprises the service area and service domain, while the technology acceptance model comprises the service area, technical domain, technical sub-domain, and open source software name. Finally, the evaluation index comprises the evaluation group, category, and items. Results - Utilization of an open source software service level evaluation model For the development of an open source software service level evaluation model, common service providers need to standardize the quality of the service, so that surveys and expert workshops performed in open source software service companies can establish the evaluation criteria according to their qualitative differences. Conclusion - Based on this evaluation model's systematic evaluation process and monitoring, an open source software service adoption company can acquire reliable information for open source software adoption. Inducing the growth of open source software service companies will facilitate the development of the open source software industry.

• 대한화학회지
• /
• 제65권3호
• /
• pp.209-218
• /
• 2021

이 연구는 탐구보고서에 기반하여 화학교사의 학생 역량 평가 실태를 알아보았다. 이를 위해 2020학년도 1급 화학 정교사 연수를 수행한 2개의 대학에서 연수를 수강한 화학교사를 대상으로 탐구보고서를 수합하였다. 교사들이 탐구보고서를 통해 학생의 어떠한 역량을 평가하고 있는지를 국가수준학업성취도 평가틀에서 제시한 과학과 교과 역량을 이용하여 분석하였다. 총 63명의 화학교사 탐구보고서를 수집하였으며, 이를 역량별, 각 역량의 하위 요소별, 세부 요소별로 분석하여 실태를 분석하였다. 연구결과, 대부분의 화학교사들은 탐구보고서를 통해 '과학적 탐구 및 문제 해결 능력'을 평가에 반영하고 있었다. 지필평가를 통해 주로 평가하는 '과학 원리의 이해 및 적용 능력'은 탐구 시작 시 선수학습의 확인으로 일부 사용되고 있었으며, '과학적 의사소통 능력'을 평가 하는 비중은 크지 않았다. 탐구보고서를 통해 '과학적 탐구 및 문제 해결력' 의 경우 '탐구 설계 및 수행', '자료의 분석과 해석', '결론 도출 및 해결 방안 제시'가 주로 평가되고 있었으며, '문제 발견 및 인식'과 '모형의 개발과 사용'은 거의 평가되지 않는 것으로 나타났다.

• 한국정보시스템학회지:정보시스템연구
• /
• 제30권1호
• /
• pp.151-177
• /
• 2021

Purpose This paper aims to improve management performance by effectively responding to production needs and reducing inventory through synchronizing production planning and procurement in the aviation industry. In this study, the differences in production planning and execution were first analyzed in terms of demand, supply, inventory, and process using the big data collected from a domestic aircraft manufacturers. This paper analyzed the problems in procurement and inventory management using legacy big data from ERP system in the company. Based on the analysis, we performed a simulation to derive an efficient procurement and inventory management plan. Through analysis and simulation of operational data, we were able to discover procurement and inventory policies to effectively respond to production needs. Design/methodology/approach This is an empirical study to analyze the cause of decrease in inventory turnover and increase in inventory cost due to dis-synchronize between production requirements and procurement. The actual operation data, a total of 21,306,611 transaction data which are 18 months data from January 2019 to June 2020, were extracted from the ERP system. All them are such as basic information on materials, material consumption and movement history, inventory/receipt/shipment status, and production orders. To perform data analysis, it went through three steps. At first, we identified the current states and problems of production process to grasp the situation of what happened, and secondly, analyzed the data to identify expected problems through cross-link analysis between transactions, and finally, defined what to do. Many analysis techniques such as correlation analysis, moving average analysis, and linear regression analysis were applied to predict the status of inventory. A simulation was performed to analyze the appropriate inventory level according to the control of fluctuations in the production planing. In the simulation, we tested four alternatives how to coordinate the synchronization between the procurement plan and the production plan. All the alternatives give us more plausible results than actual operation in the past. Findings Based on the big data extracted from the ERP system, the relationship between the level of delivery and the distribution of fluctuations was analyzed in terms of demand, supply, inventory, and process. As a result of analyzing the inventory turnover rate, the root cause of the inventory increase were identified. In addition, based on the data on delivery and receipt performance, it was possible to accurately analyze how much gap occurs between supply and demand, and to figure out how much this affects the inventory level. Moreover, we were able to obtain the more predictable and insightful results through simulation that organizational performance such as inventory cost and lead time can be improved by synchronizing the production planning and purchase procurement with supply and demand information. The results of big data analysis and simulation gave us more insights in production planning, procurement, and inventory management for smart manufacturing and performance improvement.

• 스마트미디어저널
• /
• 제10권4호
• /
• pp.35-44
• /
• 2021

최근 국가적으로 수도권광역급행철도 공사가 진행되고 있다. 도심 내의 터널 굴착공사 시 진동, 소음이 발생하며 이로 인한 인근 거주자에 불편한 영향을 미칠 수 있다. 이와 같은 상황을 대비하고자 건설사는 공사계획단계에서부터 인근지역의 주민들과의 협의, 제기된 민원에 대한 대응방안 수립 등으로 현장내 소음 및 진동 관리계획을 수립한다. 그러나 소음 및 진동 관리계획수립에도 불구하고, 공사기간 동안 산발적으로 발생하는 소음과 진동으로 인해 민원이 근본적으로 해결되지 못하고 있다. 이와 같은 문제점을 해결하기 위해서 프로젝트 계획단계에서부터 인근지역 주민들 대상으로 현실과 몰입감이 높은 소음 및 진동 시뮬레이션 기술을 제공하는 것이 하나의 해결책일 수 있다. 따라서 본 연구는 현실감과 몰입감을 높일 수 있는 가상현실을 기반으로 발파소음 및 진동을 직접 체험할 수 있는 시뮬레이션 시스템 개발의 필요성을 인지하고 개발에 앞서 시스템 사용의 용이성 및 편이성을 고려한 UI를 설계하고자 한다. 본 연구 결과는 향후 가상현실 기반 발파소음 및 진동 시뮬레이션 개발에 기여할 것으로 사료하며, 최종 결과물은 도심 내의 터널 굴착공사계획 수립 및 민원대응에 효과적일 것으로 예상된다.

• 국제학술발표논문집
• /
• The 3th International Conference on Construction Engineering and Project Management
• /
• pp.30-31
• /
• 2009

Early detection of schedule delay in field construction activities is vital to project management. It provides the opportunity to initiate remedial actions and increases the chance of controlling such overruns or minimizing their impacts. This entails project managers to design, implement, and maintain a systematic approach for progress monitoring to promptly identify, process and communicate discrepancies between actual and as-planned performances as early as possible. Despite importance, systematic implementation of progress monitoring is challenging: (1) Current progress monitoring is time-consuming as it needs extensive as-planned and as-built data collection; (2) The excessive amount of work required to be performed may cause human-errors and reduce the quality of manually collected data and since only an approximate visual inspection is usually performed, makes the collected data subjective; (3) Existing methods of progress monitoring are also non-systematic and may also create a time-lag between the time progress is reported and the time progress is actually accomplished; (4) Progress reports are visually complex, and do not reflect spatial aspects of construction; and (5) Current reporting methods increase the time required to describe and explain progress in coordination meetings and in turn could delay the decision making process. In summary, with current methods, it may be not be easy to understand the progress situation clearly and quickly. To overcome such inefficiencies, this research focuses on exploring application of unsorted daily progress photograph logs - available on any construction site - as well as IFC-based 4D models for progress monitoring. Our approach is based on computing, from the images themselves, the photographer's locations and orientations, along with a sparse 3D geometric representation of the as-built scene using daily progress photographs and superimposition of the reconstructed scene over the as-planned 4D model. Within such an environment, progress photographs are registered in the virtual as-planned environment, allowing a large unstructured collection of daily construction images to be interactively explored. In addition, sparse reconstructed scenes superimposed over 4D models allow site images to be geo-registered with the as-planned components and consequently, a location-based image processing technique to be implemented and progress data to be extracted automatically. The result of progress comparison study between as-planned and as-built performances can subsequently be visualized in the D4AR - 4D Augmented Reality - environment using a traffic light metaphor. In such an environment, project participants would be able to: 1) use the 4D as-planned model as a baseline for progress monitoring, compare it to daily construction photographs and study workspace logistics; 2) interactively and remotely explore registered construction photographs in a 3D environment; 3) analyze registered images and quantify as-built progress; 4) measure discrepancies between as-planned and as-built performances; and 5) visually represent progress discrepancies through superimposition of 4D as-planned models over progress photographs, make control decisions and effectively communicate those with project participants. We present our preliminary results on two ongoing construction projects and discuss implementation, perceived benefits and future potential enhancement of this new technology in construction, in all fronts of automatic data collection, processing and communication.

• 패션비즈니스
• /
• 제6권1호
• /
• pp.137-154
• /
• 2002

It's not easy to renew old brand of over 50 years history to the tastes of new consumer of our time. Most of national brands that has a history of some 20 years in Korea have strove for continuation and growth of brand to no avails, which can be taken as a good example of current situation. For instance, C company, one of the National brand of US which has a history of 51 years, has made its position secure as a fashion group and based itself on a sound foundation by establishing new marketing strategy and completing successful brand renewal in the process of strategic M&A with Italian company. Those successful marketing strategies are as follows. 1) they regarded both market and consumer oriented marketing activity as company's highest priority strategy and put great emphasis upon concentration on target market and reestablishment of brand image of business casual wear. 2) Setting up and operating planning team composed of merchandizer alone in Milano, they set the direction of plan on the basis of concentrated research on potential item in market according to thorough market research done by buying office in Korea, branch office in Hong Kong and buyer in US prior to blueprint planning for season. 3) Great emphasis was placed on business which focused on intensive presentation of basic key item for apparel career women who are main consumer group in the midium-low prices market in US and on supplementation of size and color. they named this line 'collectibles' and helped their customer develop their own clothes plan without worrying about the change of color and fabric by supporting same fabric and color throughout the year and enabled them to add variation easily by supplementing new trend item. 4) Company set black as a main color that lots of apparel career women find easy to care and to express their own image and presented them with pebble which belongs to navy and beige and added fashion color such as wine and brown etc as season goes by. They constructed basic line in order for their customers to coordinate purchased item with new one or to add them to present collection, and to achieve efficient sale by setting up strategy which allows this cross coordination and changing pattern occasionally. 5) Though basic jacket for 99$, short slim skirt for 49$ are products within midium-low prices range, in the material planning stage aiming at production of item that has both resonable function appealing to consumer and is fashionable, synthetic material had to be used as a main source due to price competitiveness. Despite this situation, considering comfortable sense of fit and refined drape of silhouette that has no sign of cheap material, whole collectible line was divided into two items, which contributed to reduction of cost. In case of material that is composed of triacetate and polyester in 70 to 30 ratio, was used up to 4 million yard, which allowed drastic curtailment of cost accompanied by concentration. In case of 'collectibles' line, using Korean material mainly, C company chose to have their product sewed in Southeast Asian countries where transportation is well developed and both productivity and quality verified by operating global production system which aiming at cutdown of cost through outsourcing production from the country where labor cost is low and getting finished product. Polarization between present consumers telling us that consumers with the mind of middle classes in the past no longer exists between consumers who seek after only fine article of highest quality and wise consumers who are sensible enough to judge bubble on correlation between price and quality. To cope with this change in new consumer mind, apparel makes changing their policy so as to produce item that has reasonable quality and falls within affordable price range anywhere in the world. and they're striving to get out of difficult situation by operating global marketing strategy which stresses separation of planning, production and sale and sensibility of fashion shared worldwide. The marketing strategy of C company can be exemplified as a successful one.