• Journal of the Korean Society of Physical Medicine
• /
• 제8권3호
• /
• pp.443-448
• /
• 2013

PURPOSE: In recent years, senior friendly device is growing rapidly because of population aging The study was designed to investigate the effects of table height of electronic bed on upper extremity and trunk EMG in elderly. METHODS: Thirty right-handed elderly without history of neurological and musculoskeletal dysfunction were participated in this study. Three heights of the table (3/3 height, 2/3 height, and 1/3 height between top of the shoulder and olecranon) were provided. During the eating performance, surface electromyography (EMG) was used to measure muscle activity, and electrodes were attached to the deltoid middle fiber, serratus anterior, suprapinatus, upper trapezius, rhomboideus, cervical part of longissimus, thoracic part of longissimus, lumbar part of longissimus on right. One way ANOVA was conducted for the statistical analysis. RESULTS: There were significant differences in deltoid middle fiber, suprapinatus, upper trapezius, rhomboideus, lumbar part of longissimus in the 3 different height of table (p<.05). The deltoid middle fiber, suprapinatus, upper trapezius, and lumbar part of longissimus were significantly increased in higher table than lower table(p<.05). And the rhomboideus was significantly decreased in higher table than lower table(p<.05). CONCLUSION: This study demonstrates that different height of table affect upper extremity and trunk muscle activity. The table height of olecranon is the best for elderly.

• Journal of Korean Institute of Industrial Engineers
• /
• 제39권3호
• /
• pp.192-197
• /
• 2013

In this study, it is investigated the relationship between sitting discomfort and major design variables of lumber support, such as prominence, height and width through volunteer tests. Korean $50^{th}$ percentile males and American $50^{th}$ percentile males are recruited among 36 to 45 years old peoples who have driving experiences and have no back pain during the past 12 months. Subject ratings are asked by changing design variables randomly. Body pressure and lumber position changes are also measured as object measures. And correlation among subject ratings, object measures and three design variables are analyzed using statistical analysis. As a result, it is revealed that prominence is the most dominant factor that correlates to the discomfort strongly for both-Koreans and Americans and contribution of other two variables are very low.

• Physical Therapy Korea
• /
• 제20권3호
• /
• pp.54-61
• /
• 2013

This study was to determine the reliability and validity of manual measurements of patellar height to standard radiographic measurements in 30 knees of 15 subjects. Patellar height was measured using manual and radiographic methods. The manual measurements were performed by two examiners using digital vernier calipers with the subject sitting and the knees in $30^{\circ}$ of flexion. The radiographic measurements were performed in the same position. The reliability of the manual measurements was assessed by means of intraclass correlation coefficients [ICC(3,1)], and the validity was investigated using the Pearson's product-moment correlation coefficient and an independent t-test. The intra- and inter-rater reliabilities of the manual measurement of patellar height were excellent (ICC=.86 and .88 respectively). The validity of patellar height measured manually compared to the radiographic method was good (Pearson's r=.69). In conclusion, the manual method is an objective, qualitative measurement of patella height.

• PNF and Movement
• /
• 제14권2호
• /
• pp.149-155
• /
• 2016

Purpose: The purpose of this study was to investigate the effects of using proprioceptive neuromuscular facilitation (PNF) exercise in the progressive sitting position on the dynamic balance ability of a patient with a cerebellar injury. Methods: The subject had ataxia due to cerebellar injury. The subject participated in a PNF bilateral scapular pattern exercise with stabilizing reversal technique during a progressive sitting position session as well as baseline for 20 minutes a day for 4 weeks. In the first session, PNF exercises were performed at a height of 40 cm for 10 minutes, and in the second session they were performed at 50 cm for 10 minutes from a lower center of gravity (COG) to a higher COG sitting position. We used the Berg Balance Scale (BBS), Five-Times-Sit-to-Stand Test (FTSST), and the Timed Up and Go Test (TUGT) to measure the subject's dynamic balance ability every two days through the entire session. Results: After participating in the program, the subject's dynamic balance ability improved compared to the first baseline, as measured by BBS (2 points increased), FTSST (5.3 sec decreased), and TUGT (2 sec decreased). The increase was also maintained in the second baseline session. Conclusion: PNF exercise using bilateral scapula patterns with a stabilizing reversal technique helps to enhance the dynamic balance ability of a cerebellar injury patient.

• Journal of Korean Physical Therapy Science
• /
• 제29권1호
• /
• pp.41-46
• /
• 2022

Background: The purpose of this study was to develop a sit-to-stand transfer assistive device, and to conduct a feasibility test. Design: A technical note. Methods and results: In this study, we developed a sit-to-stand transfer assistive device for the elderly and the disabled who have difficulty standing up independently from sitting positions. The sit-to-stand transfer assistive device allows the user to transfer the weight from a sitting position to a standing position while shifting the weight forward by grabbing and pulling a support stand. Ten healthy adults participated in the feasibility test of the device. Each participant used the developed sit-to-stand transfer assistive device and investigated supplementation through a brief interview. As a result of the feasibility test, the opinion was that the device could assist the sit-to-stand transfer to some extent. There were opinions that it needed a function to adjust the height of the knee protective plate in the sitting position according to the user's physical characteristics. Because of the inconvenience of operating the lock device for fixing the position and adjusting inclination, there was an opinion that the improvement for a locking device is needed. There were opinions that it would be better to reduce the size of the device due to its inconvenience of portability. Conclusion: In this study, we developed the sit-to-stand transfer assistive device for the elderly and the disabled who have difficulty standing up independently from sitting positions. In addition, it is considered that the upgrade of the device is necessary for the future since there are supplementary opinions on some points.

• Journal of the Ergonomics Society of Korea
• /
• 제36권2호
• /
• pp.69-86
• /
• 2017

Objective: The present study is intended to develop an improved bus seat armrest design by evaluating various bus armrest designs from ergonomic aspects. Background: An ergonomic armrest design which considers the sitting postures and body shapes of passengers can improve the convenience and comfort of a bus seat. Method: Subjective satisfaction of each of five design dimensions (length, width, height from seatpan, shape, and angle) was evaluated for seven bus seat armrest designs in various sizes and shapes by 58 participants (28 males and 33 females) using a 7-point scale (1: very dissatisfied, 4: neutral, and 7: very satisfied). Improved bus seat armrest designs adjustable in length and rotatable to the left or right (sliding and rotating armrest, SRA) with a concave, flat, or convex shape of the upper part were developed by considering the preferred design features and the body size and shape in sitting posture and needs of passengers and then compared with a conventional armrest. Results: A bus seat armrest with a wide width (40~50mm), a long length (360mm), a lower height (213mm), and a curved shape was found significantly preferred in terms of comfort. The proposed armrest designs (SRA-convex, SRA-flat, and SRA-concave) improved satisfaction by 46~62% for length suitability, 184~216% for width suitability, 205~214% for angle suitability, 138~181% for contact area suitability, and 49~64% for height suitability, 138~174% for comfort, and 93~111% for overall satisfaction. Conclusion: The preferred design features and passengers' needs of bus seat armrest were identified and the SRA designs were recommended for better usability. Application: The ergonomic design process of bus seat armrest employed in the present study can be applied to designing armrests in various vehicles for better convenience and comfort.

• Journal of Nutrition and Health
• /
• 제6권1호
• /
• pp.53-69
• /
• 1973

For the purpose of ascertaining the status of physical growth and development of the University students, an intensive survey was conducted by the authors towards a total of 2,197 (male: 1,694, female: 503) who passed the written enterance examination at the Korea University in 1972. The items included the measurements on physical growth, various physical indices, status of visual distourbance and pulmonary infiltration. The findings and results can be summarized as follows. 1. Physical growth: The average of body height by sex were 167.2 cm in male and 156.0cm in female, body weight 59.3kg and 51.9kg, chest-girth 86.7cm and 81.2cm, sitting height 91.7cm and 85.8cm, respectively. 2. Various indices about physical growth & development; Relative body weight by sex were 35.47 and 33.27, relative chest girth 51.85 and 52.05, relative sitting height 54.84 and 55.00, respectively. $R{\ddot{a}}here$ index was 1,269 in males and 1,367 in females, Kaup index 2,121 and 2,133, Verveck index 87.32 and 85.32, respectively. 3. Status of visual distaurbance: The vision of the students under 0.9 with Han's testing chart was 52.83% and 55.27% in left eye and 53.60% and 54.87% in right eye, respectively. 4. Pulmonary infiltration Among the total 58 students were diagncsed as pulmonary infiltration (tuberculosis), of whom 43 were minimal case, 12 were moderately advanced cases and 3 were far advanced cases.

• Journal of Nutrition and Health
• /
• 제4권4호
• /
• pp.29-38
• /
• 1971

A survey on 4,117 (Boys:2,004, Girls:2,113) High School students in an urban area was conducted for assessing their physical growth, development and nutritional status from may throuth june 1971, and the following results were obtained. 1. Physical Growth and Development. a) Maximum growth was seen during the period from 12 to 16 years of age. b) The Maximum annual growth rates were as follows; Height: Boys-8.1cm from 14 to 15 years of age Girls-4.7cm from 13 to 14 Weight: Boys-8.0kg from 14 to 15 Girls-4.5kg from 13 to 14 Chest Girth: Boys-6.1cm from 14 to 15 Girls-4.2cm from 13 to 14 Sitting Height: Boys-4.6cm from 14 to 15 Girls-2.5cm from 13 to 14 c) The greatest individual differences in growth and development were observed during 12-15 years of age. d) Korean students were shorter than Japanese in 12-16 years of age group but after 17, Korean students become taller than Japanese. e) The standards of growth of rescent urban korean students show much improved than that of 1955. 2. Various Indices about Physical Growth and Development. a) Relative body weight was increased steadily annually and the crossing point of boys and girls appeared at age 11 at which girls surpassed boys and at 14, boys surpassed girls. b) Relative chestgirth showed narrow chest style in boys from 11 to 15 and from 11 to 14 in girls. c) The average relative sitting height was 54.0 in both sexes. d) The $R\ddot{o}hrer$ index was 1.1 in boys and 1.2-1.3 in girls. e) The Kaup index was lower than 2.0 in boys from 11 to 16 and in girls from 11 to 14. It becomes higher than 2.0 after 17 in boys but in girls after 15.

• Journal of Nutrition and Health
• /
• 제26권8호
• /
• pp.982-997
• /
• 1993

This study was conducted to evaluate the nutritional status and nutrition knowledge of upper elementary school children attending a rural type school lunch programs. The subjects of this study consisted of 186 elementary school students in the 5th and 6th grades. Anthropometric measurements were taken for body weight, hight, sitting height, triceps skinfold thickness, and circumferences of midarm and chest. Dietary intakes of nutrients were assessed by modified 24-hour recall method. Test consisted of multiple-cholic items was used to assess nutrition knowledge of subjects. The results are summerized as follows: 1) The children's average body weight were 34.8kg in and 37.6kg in girls. Their average heights were 140.2cm in boys and 143.9cm in girls. Body weight, height, sitting height, triceps skinfold and body surface area of girls were significantly higher than those of boys(p<0.05). Anthropometric data of children approximated to the Korean standards, but were lower than those of children in Seoul and other rural area. 2) Total daily energy and nutrient intakes were below the RDA's, except for intakes of niacin and ascorbic acid. School lunch provided 30.5% of total energy intake ; 3.13% of carbohydrate intake, 30.3% of protein intake and 32.4% of fat intake. Therefore, school lunch largely contributed to the nutritional balance of these children. 3) The mean scores on the nutrition knowledge test of fifth grade and sixth grade students were 16.8(out of possible 40 points) and 23.5 (out of a possible 50 points), respectively. 4) Score of food habit had positive correlations with intakes of protein, iron and niacin. But score of nutrition knoweldge test showed to be only related to intake of ascorbic acid.

• IE interfaces
• /
• 제18권3호
• /
• pp.288-296
• /
• 2005

Many jobs and activities in our daily lives require squatting postures. The fore part includes housekeepers, farmers, and welders and the latter includes a wide variety of activities such as housekeeping; planting, cultivating and harvesting various agricultural products; grinding, welding, etc. It is speculated that prolonged squatting postures without any supporting stool would gradually cause musculoskeletal injuries to workers. This study is conducted to examine the proper height of stools according to the position of the working materials and to develop wearable stools for workers with squatting posture. Forty male and female subjects participated in the experiment to find the proper height of stools according to the position of the working materials. Subjects were asked to squat and work with 3 different working positions: floor level; ankle level; shank level of 3 different stool height conditions: 10cm height; 15cm height; and 20cm height. After 5 minutes of maintaining a squatting work posture while sitting on the different height stools, Likert summated rating method as well as pairwise ranking test was applied to evaluate the user preferences for provided stools under the conditions of different working positions. The results of statistical analysis show that the subjects preferred 10cm height stool for floor level, 15cm height stool for ankle level, 20cm height stool for knee level. We thus strongly recommend to use appropriate height stools in accordance with the different working positions. Moreover, a prototype wearable stool was designed such that workers with squatting posture do not need to move the stool while they are moving about. The purpose of developing wearable stool was to decrease the physical stress and hence promote worker's health who work with squatting posture.