• Journal of Dental Rehabilitation and Applied Science
• /
• v.37 no.2
• /
• pp.61-72
• /
• 2021

A beautiful smile is made when it is symmetrical and gums are displayed less than 2 - 3 mm. Excessive gingival display also known as "gummy smile" is often recognized to be unaesthetic. Causes of gummy smile can be caused by delayed eruption, vertical maxillary excess, hypermobile upper lip, or a short upper lip. Meanwhile botulinum toxin which is an exotoxin produced from Clostridium botulinum, works by blocking the release of acetylcholine from the cholinergic nerve end plates leading to inactivity of the muscles. The application site and weakens the muscle tone is drawing attention as a gummy smile treatment caused by hypermobile upper lip. There have been many studies about the method of injecting botulinum toxin into muscles around the lips, but there is still no standardized research method and treatment method, so there is controversy over the therapeutic effect. The aim of this study is to review the previous studies about the predictors of indication and effects of gummy smile treatment using botulinum toxin injection. Especially we tried to propose a protocol for optimal dose and efficient injection point through the anatomical considerations for gummy smile treatment using botulinum toxin.

• Journal of Marine Life Science
• /
• v.6 no.2
• /
• pp.106-116
• /
• 2021

To secure basic data by monitoring the growth of salmon (Oncorhynchus keta) released to the Taehwa River. After discharge, the characteristics of the young salmon distribution and migration rate habitat were investigated for two years. A total of 4 points [Sunbawi bridge (St.1), Guyeong bridge (St.2), Samho bridge (St.3), and Myeongchon bridge (St.4)] were investigated. The survey of 2017 indicating an increase of 10 mm in average length and 0.8 g in average weight, and the survey of 2018 indicating an increase of 10 mm in average length and 0.5 g in average weight. Among 39 species, 10 insectivorous and 12 omnivorous, are believed to compete with young salmon for food. 6, 5, 6 and 8 predatory fish species has emerged at each site, respectively. According to this study, it is believed that St.1 and St.2 points are more proper as discharge location of young salmon because these two points have less varied in depth, flow rate, salt concentration etc. In addition, it is thought that the night or dawn time in early January is the best discharge time of young salmon fish because predatory fish such as Korean piscivorous chub and bass etc. does not eat food actively at that time.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.525-536
• /
• 2009

The current residential process adheres to a traditional method of construction involving wood framing on-site on poured concrete foundations which has been widely applied in North America. A conventional residential construction process can include seventeen distinct stages ranging from stake-out to pre-occupancy inspection. The current practice possesses short comings including high construction material wastes, long scheduling timelines, adverse weather conditions, poor quality, low efficiencies and negative environmental impacts from transportation and equipment use. Over CAN $5 billion dollars was spent in the construction sector during 2007 in Canada. Previous findings in CO₂ emissions during the construction process of a conventional dwelling emphasize more than 45 tonnes of CO₂ emissions. Hence, in Alberta alone during 2007, almost 50,000 residential units would release more than two million tonnes of CO₂. These numbers demonstrate the economical and environmental impact in building construction and its relationship with CO₂ emissions. The aim of this paper is to quantify the CO₂ emissions from the current residential construction process in order to establish the baseline for CO₂ emission reduction opportunities. The quantification collection methodology will be approached by identifying the seventeen various stages of construction and quantifying the contributions of CO₂ from specific activities and their impacts of work for each stage. The approach of separating these into separate stages for collection will allow for independent opportunities for analysis from various independent contractors from the entire scope of work. The use of BIM will be implemented to efficiently quantify CO₂ emissions. Based on the CO₂ quantification baseline, emission reduction opportunities such as an industrialized construction process will be introduced that allows homebuilders to reduce the environmental and economical impact of home construction while enabling them to produce higher quality, more energy efficient homes in a safer and shorter period of time.

• 한국노년학
• /
• v.31 no.4
• /
• pp.939-967
• /
• 2011

This study observed elderly women's adaptation process on separation by death in rural areas through grounded theory approach and developed its entity theory. Participants for this study were 14 elderly women who have lost their husbands in the last 12 months. The study was conducted for 8 months starting January 2010. Each interview per session took 40 to 90 minutes, study notes were taken on site, and recorded contents were transcribed by the researcher which was myself. The research data were collected by in-depth interview and with help of local community's nurses who were in charge of taking care of the participants. The collected data were analyzed by applying Strauss & Corbin's grounded theory (1998). As a result of study, 80 concepts, 28 subcategories, and 12 categories were deducted during open coding process. Adaptation process on separation by death was process of 'finding a way to live alone' which used strategy of 'attempting a make changes in life', and 'embracing the situation' which were influenced by conciliatory conditions of 'degree on economic condition', 'change in health', and 'supporting system' which focuses on phenomenon of 'bearing life alone' which is influenced by context condition of 'marital chemistry of couples during lifetime', and 'the couple's leadership during lifetime' together with casual conditions of 'the fall of wall'. The adaptation process accordance to time flow were divided into 4 steps which were step of 'shock and release of emotions', step of 'longing and resentment', step of 'resignation and acceptance', and step of 'life's restructure'. Above results suggest right directions for welfare for the aged and process of 'finding a way to live alone' for participants by controlling several factors and using intervention strategy, and provided basic data required for developing and applying practical welfare mediation.

• Korean Journal of Environment and Ecology
• /
• v.28 no.5
• /
• pp.550-558
• /
• 2014

This study was conducted to investigate the distribution and the population dynamics of Hipparchia autonoe by using a line transect and Mark-Release-Recapture (MRR) at the Mt. Halla in Jeju Island. The results showed that H. autonoe was found from 1,500 m above the sea level. Total 1,493 H. autonoe with 978 males and 515 females were captured and released in the MRR study site. Among them, 518 individuals including 284 males and 234 females were recaptured. The average survival time was 2.31 days with 2.14 days for males and 3.47 days for females, indicating longer survival time in case of females than males. The daily population size of males estimated in the MRR study site was maintained about 1,000 individuals in July and gradually decreased less than 200 in August. The number of females showed peak at 335 individuals on July 24, and gradually decreased less than 120 in August. Thus, female population was 1/3 of males. The average travel distance of male and female H. autonoe were $116.8{\pm}191.9m$ and $118.4{\pm}161.5m$, respectively, indicating almost same between sexes. H. autonoe in the Mt. Halla formed single population group in the wide meadow around the Baekrokdam Lake. The highest population density of H. autonoe was occurred in the restored area from damages, where host plants such as the sheep's fescue or the food plant are abundant by artificial restoration efforts.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.23 no.2
• /
• pp.36-46
• /
• 2015

Integration of crop-livestock farming has been a problem-solving mode for abatement of environmental pollution and recovery of resources in recent years. The objectives of this study were 1) to suggest the customized integration of crop-livestock farming model reflecting the regional characteristics through in-depth analysis of case study and 2) to analyze the livestock nutrients flow in terms of three primary elements as nitrogen(N), phosphorous(P), and potassium(K). The personal interview and survey were carried out in 2012 for a total of 161 farms from four different regions(NS, NW, JJ, YC) in South Korea. The mass balance analysis was used to suggest and evaluate the models for two sites(JJ and YC). The results showed that NS and NW sites produced relatively more livestock manure than the sites of YC and JJ because of the regional differences in livestock numbers and urbanization. The models were suggested for the site JJ and site YC, and 'two track model(energy and resource recovery)' and 'dispersal type model' were assigned respectively. For the nutrient flows, the releasing P and K with new models had increased up to 7%, while N release had decreased down to 15% in both YC and JJ sites compared to the present treatment system. Estimated value showed that there was oversupply of N (719 ton/yr) and $P_2O_5$ (1,269 ton/yr) in YC and deficiency of N (671 ton/yr) and excessive $P_2O_5$ (32 ton/yr) in JJ respectively. Therefore, P runoff has to be considered an eutrophication occurs in rural small stream when an integration of crop-livestock farm system is applied into both sites.

• Clinical and Experimental Reproductive Medicine
• /
• v.23 no.3
• /
• pp.247-268
• /
• 1996

It has been known for a long time that gonadotropins and steroid hormones play a pivotal role in a series of reproductive biological phenomena including the maturation of ovarian follicles and oocytes, ovulation and implantation, maintenance of pregnancy and fetal growth & development, parturition and mammary development and lactation. Recent investigations, however, have elucidated that in addition to these classic hormones, multiple growth factors also are involved in these phenomena. Most growth factors in reproductive organs mediate the actions of gonadotropins and steroid hormones or synergize with them in an autocrine/paracrine manner. The insulin-like growth factor(IGF) system, which is one of the most actively investigated areas lately in the reproductive organs, has been found to have important roles in a wide gamut of reproductive phenomena. In the present communication, published literature pertaining to the intrauterine IGF system will be reviewed preceded by general information of the IGF system. The IGF family comprises of IGF-I & IGF-II ligands, two types of IGF receptors and six classes of IGF-binding proteins(IGFBPs) that are known to date. IGF-I and IGF-II peptides, which are structurally homologous to proinsulin, possess the insulin-like activity including the stimulatory effect of glucose and amino acid transport. Besides, IGFs as mitogens stimulate cell division, and also play a role in cellular differentiation and functions in a variety of cell lines. IGFs are expressed mainly in the liver and messenchymal cells, and act on almost all types of tissues in an autocrine/paracrine as well as endocrine mode. There are two types of IGF receptors. Type I IGF receptors, which are tyrosine kinase receptors having high-affinity for IGF-I and IGF-II, mediate almost all the IGF actions that are described above. Type II IGF receptors or IGF-II/mannose-6-phosphate receptors have two distinct binding sites; the IGF-II binding site exhibits a high affinity only for IGF-II. The principal role of the type II IGF receptor is to destroy IGF-II by targeting the ligand to the lysosome. IGFs in biological fluids are mostly bound to IGFBP. IGFBPs, in general, are IGF storage/carrier proteins or modulators of IGF actions; however, as for distinct roles for individual IGFBPs, only limited information is available. IGFBPs inhibit IGF actions under most in vitro situations, seemingly because affinities of IGFBPs for IGFs are greater than those of IGF receptors. How IGF is released from IGFBP to reach IGF receptors is not known; however, various IGFBP protease activities that are present in blood and interstitial fluids are believed to play an important role in the process of IGF release from the IGFBP. According to latest reports, there is evidence that under certain in vitro circumstances, IGFBP-1, -3, -5 have their own biological activities independent of the IGF. This may add another dimension of complexity of the already complicated IGF system. Messenger ribonucleic acids and proteins of the IGF family members are expressed in the uterine tissue and conceptus of the primates, rodents and farm animals to play important roles in growth and development of the uterus and fetus. Expression of the uterine IGF system is regulated by gonadal hormones and local regulatory substances with temporal and spatial specificities. Locally expressed IGFs and IGFBPs act on the uterine tissue in an autocrine/paracrine manner, or are secreted into the uterine lumen to participate in conceptus growth and development. Conceptus also expresses the IGF system beginning from the peri-implantation period. When an IGF family member is expressed in the conceptus, however, is determined by the presence or absence of maternally inherited mRNAs, genetic programming of the conceptus itself and an interaction with the maternal tissue. The site of IGF action also follows temporal (physiological status) and spatial specificities. These facts that expression of the IGF system is temporally and spatially regulated support indirectly a hypothesis that IGFs play a role in conceptus growth and development. Uterine and conceptus-derived IGFs stimulate cell division and differentiation, glucose and amino acid transport, general protein synthesis and the biosynthesis of mammotropic hormones including placental lactogen and prolactin, and also play a role in steroidogenesis. The suggested role for IGFs in conceptus growth and development has been proven by the result of IGF-I, IGF-II or IGF receptor gene disruption(targeting) of murine embryos by the homologous recombination technique. Mice carrying a null mutation for IGF-I and/or IGF-II or type I IGF receptor undergo delayed prenatal and postnatal growth and development with 30-60% normal weights at birth. Moreover, mice lacking the type I IGF receptor or IGF-I plus IGF-II die soon after birth. Intrauterine IGFBPs generally are believed to sequester IGF ligands within the uterus or to play a role of negative regulators of IGF actions by inhibiting IGF binding to cognate receptors. However, when it is taken into account that IGFBP-1 is expressed and secreted in primate uteri in amounts assessedly far exceeding those of local IGFs and that IGFBP-1 is one of the major secretory proteins of the primate decidua, the possibility that this IGFBP may have its own biological activity independent of IGF cannot be excluded. Evidently, elucidating the exact role of each IGFBP is an essential step into understanding the whole IGF system. As such, further research in this area is awaited with a lot of anticipation and attention.

• Tuberculosis and Respiratory Diseases
• /
• v.44 no.4
• /
• pp.871-888
• /
• 1997

Background : It is now thought that the earliest manifestation of idiopathic pulmonary fibrosis is alveolitis, that is, an accumulation of inflammatory and immune effector cells within alveolar walls and spaces. Inflammatory cells including alveolar macrophages and resident normal pulmonary tissue cells participate through the release of many variable mediators such as inflammatory growth factors and cytokines, which contribute to tissue damage and finally cause chronic pulmonary inflammation and fibrosis. This study was performed to investigate the source and distribution pattern of transforming growth factor-${\beta}_1$(TGF-${\beta}_1$), platelet derived growth factor(PDGF), basic fibroblast growth factor(bFGF), interleukin 1(IL-1), interleukin 6(IL-6), tumor necrosis factor-$\alpha$ (TNF-$\alpha$) and the role of these mediators on bleomycin(BLM)-induced pulmonary injury and fibrosis in rats. Method : Wistar rats were divided into three groups(control group, BLM treated group, BLM and vitamine E treated group). Animals were sacrificed periodically at 1, 2, 3, 4, 5, 7, 14, 21, 28 days after saline or BLM administration. The effects were compared to the results of bronchoalveolar lavage fluid analysis, light microscopic findings, immunohistochemical stains for six different mediators(TGF-${\beta}_1$, PDGF, bFGF, IL-1, IL-6 and TNF-$\alpha$) and mRNA in situ hybridization for TGF-${\beta}_1$. Results : IL-1 and IL-6 are maximally expressed at postbleomycin 1~7th day which are mainly produced by neutrophils and bronchiolar epithelium. It is thought that they induce recruitment of inflammatory cells at the injury site. The expression of IL-1 and IL-6 at the bronchiolar epithelium within 7th day is an indirect evidence of contribution of bronchiolar epithelial cells to promote and maintain the inflammatory and immune responses adjacent to the airways. TNF-$\alpha$ is mainly produced by neutrophils and bronchiolar epithelial cells during 1~5th day, alveolar macrophages during 7~28th day. At the earlier period, TNF-$\alpha$ causes recruitment of inflammatory cells at the injury site and later stimulates pulmonary fibrosis. The main secreting cells of TGF-${\beta}_1$ are alveolar macrophages and bronchiolar epithelium and the target is pulmonary fibroblasts and extracellular matrix. TGF-${\beta}_1$ and PDGF stimulate proliferation of pulmonary fibroblasts and TGF-${\beta}_1$ and bFGF incite the fibroblasts to produce extracellular matrix. The vitamine E and BLM treated group shows few positive cells(p<0.05). Conclusion : After endothelial and epithelial injury, the neutrophils and bronchiolar epithelium secrete IL-1, IL-6, TNF-$\alpha$ which induce infiltration of many neutrophils. It is thought that variable enzymes and $O_2$ radicals released by these neutrophils cause destruction of normal lung architecture and progression of pulmonary fibrosis. At the 7~28th day, TGF-${\beta}_1$, PDGF, bFGF, TNF-$\alpha$ secreted by alveolar macrophages sting pulmonary fibroblasts into proliferating with increased production of extracellular matrix and finally, they make progression of pulmonary fibrosis. TNF-$\alpha$ compares quite important with TGF-${\beta}_1$ to cause pulmonary fibrosis. Vitamine E seems to decrease the extent of BLM induced pulmonary fibrosis.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2004.06a
• /
• pp.257-258
• /
• 2004

The dose from radionuclides released from high-level radioactive waste (HLW) glasses as they corrode must be taken into account when assessing the performance of a disposal system. In the performance assessment (PA) calculations conducted for the proposed Yucca Mountain, Nevada, disposal system, the release of radionuclides is conservatively assumed to occur at the same rate the glass matrix dissolves. A simple model was developed to calculate the glass dissolution rate of HLW glasses in these PA calculations [1]. For the PA calculations that were conducted for Site Recommendation, it was necessary to identify ranges of parameter values that bounded the dissolution rates of the wide range of HLW glass compositions that will be disposed. The values and ranges of the model parameters for the pH and temperature dependencies were extracted from the results of SPFT, static leach tests, and Soxhlet tests available in the literature. Static leach tests were conducted with a range of glass compositions to measure values for the glass composition parameter. The glass dissolution rate depends on temperature, pH, and the compositions of the glass and solution, The dissolution rate is calculated using Eq. 1: $rate{\;}={\;}k_{o}10^{(ph){\eta})}{\cdot}e^{(-Ea/RT)}{\cdot}(1-Q/K){\;}+{\;}k_{long}$ where $k_{0},\;{\eta}$ and Eaare the parameters for glass composition, pH, $\eta$ and temperature dependence, respectively, and R is the gas constant. The term (1-Q/K) is the affinity term, where Q is the ion activity product of the solution and K is the pseudo-equilibrium constant for the glass. Values of the parameters $k_{0},\;{\eta}\;and\;E_{a}$ are the parameters for glass composition, pH, and temperature dependence, respectively, and R is the gas constant. The term (1-Q/C) is the affinity term, where Q is the ion activity product of the solution and K is the pseudo-equilibrium constant for the glass. Values of the parameters $k_0$, and Ea are determined under test conditions where the value of Q is maintained near zero, so that the value of the affinity term remains near 1. The dissolution rate under conditions in which the value of the affinity term is near 1 is referred to as the forward rate. This is the highest dissolution rate that can occur at a particular pH and temperature. The value of the parameter K is determined from experiments in which the value of the ion activity product approaches the value of K. This results in a decrease in the value of the affinity term and the dissolution rate. The highly dilute solutions required to measure the forward rate and extract values for $k_0$, $\eta$, and Ea can be maintained by conducting dynamic tests in which the test solution is removed from the reaction cell and replaced with fresh solution. In the single-pass flow-through (PFT) test method, this is done by continuously pumping the test solution through the reaction cell. Alternatively, static tests can be conducted with sufficient solution volume that the solution concentrations of dissolved glass components do not increase significantly during the test. Both the SPFT and static tests can ve conducted for a wide range of pH values and temperatures. Both static and SPFt tests have short-comings. the SPFT test requires analysis of several solutions (typically 6-10) at each of several flow rates to determine the glass dissolution rate at each pH and temperature. As will be shown, the rate measured in an SPFt test depends on the solution flow rate. The solutions in static tests will eventually become concentrated enough to affect the dissolution rate. In both the SPFt and static test methods. a compromise is required between the need to minimize the effects of dissolved components on the dissolution rate and the need to attain solution concentrations that are high enough to analyze. In the paper, we compare the results of static leach tests and SPFT tests conducted with simple 5-component glass to confirm the equivalence of SPFT tests and static tests conducted with pH buffer solutions. Tests were conducted over the range pH values that are most relevant for waste glass disssolution in a disposal system. The glass and temperature used in the tests were selected to allow direct comparison with SPFT tests conducted previously. The ability to measure parameter values with more than one test method and an understanding of how the rate measured in each test is affected by various test parameters provides added confidence to the measured values. The dissolution rate of a simple 5-component glass was measured at pH values of 6.2, 8.3, and 9.6 and $70^{\circ}C$ using static tests and single-pass flow-through (SPFT) tests. Similar rates were measured with the two methods. However, the measured rates are about 10X higher than the rates measured previously for a glass having the same composition using an SPFT test method. Differences are attributed to effects of the solution flow rate on the glass dissolution reate and how the specific surface area of crushed glass is estimated. This comparison indicates the need to standardize the SPFT test procedure.

• Journal of Soil and Groundwater Environment
• /
• v.13 no.5
• /
• pp.81-87
• /
• 2008

In accompany with the transfer of US army bases, recent surveys reported serious contamination of soils by the release of petroleum from storage facilities and heavy metals accumulated in rifle-ranges. These problems have made an increased concerns of cleanup technology for contaminated soils. In this study, a full-scale soil washing process improved by multistage continuous desorption and agitational desorption techniques was examined for petroleum-contaminated soils obtained from three different remedial sites that contained 29.3, 16.6, and 7.8% of silt and clay, respectively. The initial concentrations of total petroleum hydrocarbon (TPH) were 5,183, 2,560, and 4,860 mg/kg for each soil. Pure water was applied to operate washing process, in which water used for washing process was recycled 100% for over 6 months. The results of full-scale washing tests showed that the TPH concentrations for soils (> 3.0 mm) were 50${\sim}$356 mg/kg (85.2${\sim}$98.2% removal rates), regardless of the contents of silt and clay from in A, B and C soil, when the soils were washed at 3.0 kg/$cm^2$ of injection pressure with the method of wet particle separation. Based on the initial TPH concentration, the TPH removal rates for each site were 85.2, 98.2 and 89.9%. For soils in the range of 3.0${\sim}$0.075 mm, the application of first-stage desorption technique as a physical method resulted 834, 1,110, and 1,460 mg/kg of TPH concentrations for each soil, also additional multi-stage continuous desorption reduced the TPH concentration to 330, 385, and 245 mg/kg that were equivalent to 92.4, 90.6, and 90.1% removal rates, respectively. The result of multi-stage continuous desorption for fine soil (0.075${\sim}$0.053 mm) were 791, 885, and 1,560 mg/kg, and additional agitation desorption showed 428, 440, and, 358 mg/kg of TPH concentrations. Compared with initial concentration, the removal rates were 92.0, 93.9 and 92.9%, respectively. These results implied we could apply strategic process of soil washing for varies types of contaminated soils to meet the regulatory limit of TPH.