• Advances in environmental research
• /
• v.9 no.4
• /
• pp.275-284
• /
• 2020

We provide the first study on the occurrence of microplastics in Dal lake, Kashmir, India. Microplastics act as catastrophe that trigger many environmental problems. The key origins of microplastics are larger plastics, which split into smaller plastics after UV light disintegration. There is relatively little work carried out on the existence of microplastics. The present work has been undertaken on the occurrence of microplastics at four pre-selected sites (surface water) in Dal lake, Kashmir. The samples were taken to the laboratory to dissolve organic matter by using H2O2 (6%). To speed up the organic digestion; the treated mixture was heated on a hot plate at 70℃. The mixture was then subjected to density separation. The supernatant obtained was observed under the microscope (10X) and measurements were taken. At site-I, the microplastics ranged from 2-3 mm, site-II 5-6 mm, site-III 3-4 mm, site-IV 4-5 mm in thickness, indicating the presence of microplastics in the lake. The presence of microplastics indicated that the lake has undergone an anthropogenic change over a period of time. Our research highlights the value of enhancing the quality of the drainage system and sewage disposal. This work can be helpful to recognize successful microplastic control management techniques and possible threats associated with the Dal lake. So far, no such data on the presence of microplastics in Kashmir lakes is available.

• Archives of Plastic Surgery
• /
• v.38 no.6
• /
• pp.903-906
• /
• 2011

Purpose: Accessory tragus is a fairly common congenital malformation and usually located at pretragal area. Surgical removal is a common treatment of accessory tragus irrespective of location and morphology. Most accessory tragi do not have depression site around them, but some do. So in those cases, simple surgical excision was not enough to promote the aesthetic facial appearance. For depression site remodeling, the excess amount of skin and cartilage need to be remained partially instead of total excision. This method can achieve the symmetric contour of pretragal area. The authors excised the epidermis and cartilaginous tissue totally and remained the dermis for reconstruction of the depression site around accessory tragus. The depression site is filled with dermal turnover flap. The purpose of this report is to present new idea to promote cosmetic result in treatment of accessory tragus containing the depression site. Methods: Two patients had a pair of accessory tragi at pretragal area. One was a common featured accessory tragus, but the other was different. Depression site was found around accessory tragus. After epidermis and cartilaginous tissue were removed from it, dermis component was used as turnover flap for reconstruction of depression site. Results: After accessory tragus was removed and depression site was reconstructed, facial contour and cosmetic result was achieved. Complication such as flap necrosis and wound dehiscence was not observed. Conclusion: The accessory tragus has variant morphology and degree of invasive depth. And some has a depression site around them. In those cases, simple surgical removal results in morphological distorsion and do not promote facial symmetry. The authors suggest dermal turnover flap as reconstruction method of the depression site. This method improves both surgical outcome and cosmetic result.

• Journal of Construction Engineering and Project Management
• /
• v.6 no.2
• /
• pp.1-7
• /
• 2016

Construction in the UK is the second most dangerous industry in terms of fatal and minor injuries according to the 2014 report of HSE. The use of mobile devices such as iPad, Tablets and Smart phones on the live construction projects is also on the increase in the UK due to the 2016 - Level 2 BIM (Building Information Modelling) implementation target, set by the UK Government. Hence, the use of such devices may become a distraction from work activities on the construction sites and will cause a major risk to the end users. The subject of improving safety of BIM use is widely researched, but there is a gap in knowledge about the actual use of the mobile devices and perception of 'Site BIM', on the construction site activities. The main gap identified in the 'Site BIM' is the health and safety aspect of using such devices on the construction sites. A safer way of working with such devices needs to be identified to avoid any potential site hazards and fatalities before the widespread use of the devices are found on the construction projects. In that context, the paper is aimed to highlight the safety issues that are required to address for the successful implementation of the mobile devices for safer use of the 'Site BIM'. Questionnaire survey was used to collect the site information among construction professionals in the UK. The survey findings suggested that a proactive approach may be helpful to stop potential hazards and risks causing by the use of mobile devices and potential measures need to be identified before any injuries and incidents occur. The paper concludes that training, changing size of mobile devices and ensuring a separate induction training for 'Site BIM' tools will improve the health and safety of the end users of the mobile devices at the live construction sites.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.31 no.3
• /
• pp.42-49
• /
• 2023

Not only in aviation industry but also in other industries, safety data plays a key role to improve the level of safety performance. By analyzing safety data such as aviation safety report (text data), hazard can be identified and removed before it leads to a tragic accident. However, pre-processing of raw data (or natural language data) collected from each site should be carried out first to utilize proactive or predictive safety management system. As air traffic volume increases, the amount of data accumulated is also on the rise. Accordingly, there are clear limitation in analyzing data directly by manpower. In this paper, a topic prediction model for aviation safety mandatory report is proposed. In addition, the prediction accuracy of the proposed model was also verified using actual aviation safety mandatory report data. This research model is meaningful in that it not only effectively supports the current aviation safety mandatory report analysis work, but also can be applied to various data produced in the aviation safety field in the future.

• Archives of Plastic Surgery
• /
• v.32 no.2
• /
• pp.267-270
• /
• 2005

The two major concerns in skin grafting are poor color match at the recipient site and donor site morbidity. To overcome the limitations of the classic skin graft, we have used dermis graft-deepithelialized split thickness skin graft-for coverage of small to medium sized wounds. The important aspects of this methods involve the immediate return of epidermis to the donor site to overcome donor site morbidity and restoration of the epidermis at the recipient site by neo epithelization from the adjacent skin. From April of 2001 to July of 2003, the dermis graft was applied to 32 patients. Simultaneously, the regular split thickness skin graft procedure was performed in 33 patients. We compared the healing time in all patients. The scar condition was also evaluated at 2 to 12 months after operation. The entire dermis grafts were reepithelialized in 15.5 days. The skin grafted wounds were healed by 11.8 days. Regarding the donor sites, donor sites of dermis graft healed within 7.5 days. On the contrary those of regular skin graft required 12.8 days. The donor sites of the dermis graft were also superior to those of skin graft in scar quality and patient satisfaction. The dermis graft technique for wound coverage compares favorably to regular skin graft technique in both recipient and donor sites aesthetically and functionally.

• Journal of Chest Surgery
• /
• v.26 no.5
• /
• pp.343-348
• /
• 1993

Growth of suture line and anastomosis is required for long-term success after the tracheal and bronchial surgery in infant and pediatric patient. We used various suture materials in these cases, but the results were differ. To select the adequate suture material in tracheal surgery, we tried next. Tracheal anastomoses were performed in 150 Sprague Dawley rats, aged 4 to 8 [mean 5.8] weeks and weight 62 to 106[mean 83.6] gram, to compare polydioxanone[PDS] 7-0, polyglactin 910[Vicryl]7-0, and polypropylene [prolene] 8-0 suture materials. In 150 rats, only 29[20%] were lived over 300 days, and the weight was 250 to 320[mean 289.5]gram. Cross sectional area of the anastomoses and two or three tracheal rings below anastomosis site were measured under microscope, and calculated and compared as Hsieh`s equition. Cross-sectional area,anastomosis site/normal site 100, were 89.4 $\pm$ 5.34% in PDS group[n=9], 75.7 $\pm$ 6.06% in Vicrylgroup [n = 10], and 80.8$\pm$ 4.06% in Prolene group[n = 10]. Histopathologic studies were done for all autopsies or put in death around 300 days postoperatively. PDS absorblion was not seen 16 weeks after suture but disappeared over 24 weeks slide. Vicryl absorbtion was noted postoperative 8 to 16 weeks, with marked tissue reaction. Prolene showed least tissue reaction, but the suture material was persisted with regional fibrotic capsule.Causes of death were respiratory failure in 76 cases, tracheal rupture in 22 cases, hemorrhage, biting, starvation and etc. in 23 cases. With the brief review of literatures, we report the results.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.29 no.3
• /
• pp.227-232
• /
• 2007

The radial forearm fasciocutaneous flap(RFFF) is a well-known flap for the reconstruction of oral and maxillofacial defects. It was first described by Yang et al. in 1981 and Soutar et al. developed it for the reconstruction of intraoral defect. RFFF provides a reliable, thin, and pliable soft tissue/skin paddle that is amenable to sensate reconstruction. It also has a long vascular pedicle that can be anastomosed to any vessel in either the ipsilateral or contralateral neck. However, split thickness skin graft(STSG) is most commonly used to cover the donor site, and a variety of donor site complications have been reported, including delayed healing, swelling of the hand, persistent wrist stiffness, reduced hand strength, and partial loss of the graft with exposure of the forearm flexor tendon. Various methods for donor site repair in addition to STSG have been developed and practiced to minimize both functional and esthetic morbidity, such as direct closure, V-Y closure, full thickness skin graft, tissue expansion, acellular dermal graft. We got a good result of using artificial dermis($Terudermis^{(R)}$) and secondary STSG for the repair of RFFF donor site defect esthetically and report with a review of literature.

• The Journal of Korean Academy of Prosthodontics
• /
• v.38 no.6
• /
• pp.814-820
• /
• 2000

Statement of Problem. Commonly used classification systems do not inform for dentists the dimension of the available bone at a potential implant site although regarding a variety of morphologic and pathophysiologic aspects using schematic graphs. However, for the implantologist the availability of bone substance is most important independent whether it concerns the jaw basis or the alveolus. Purpose of Study. The present article refers to a new evaluation form, to analyze the available bone with regard to optional immediate loading site by site. According to a new systematic implant planning concept will be presented in two case reports. Results. The feasibility of the classification for planning and documentation of immediately loaded implants is presented in two case reports. Conclusion. The factor of bone support for immediate functional stability is important in dental implantology. The new systematic implant planning helps to systematically estimate the dimension (ASCIi classification) of the alveolus site by site to evaluate the possibility of immediate loading. The Gottingen classification thus aids to determine the degree of stability that can be expected for the planned solution.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.367-368
• /
• 2023

Kiscon, Seumteo, KONEPS and CSI are representative construction-related DBs. All four DBs are operated by the public. However, the characteristics of data are different depending on the purpose. Therefore, it is difficult to utilize integrated data and it is only used sparingly. Creating and sharing a unique key that can identify a construction site will enable integrated accumulation and management of construction-related data for various purposes. At this point, it is most efficient to assign a unique key based on KISCON. KISCOn data conforms to the construction site definition and covers most of the public, private, architectural and civil works. In addition, there is an advantage in that DB construction is performed in the construction situation, which is a relatively preceding process. In the future, it is necessary to create a practical construction site integrated DB through the production of an integrated key table containing linkage information of unique keys for site management, performance indicators, and statistics production.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.11a
• /
• pp.76-77
• /
• 2015

In construction industry, management of construction factors such as cost, schedule, quality and safety is the most important key for delivering successful projects. According to the Smart Market Report, a magazine specialized in construction industry, recently said 'Off-site Prefabrication' is a significant trend related with construction productivity in global construction industry. It is a kind of practice shift from On-site to Off-site. A lot of general contractors in oversea have been using 'Multi-trade MEP Ceiling Rack Prefabrication' method for getting benefits such as decreased cost & schedule and increased labor productivity. Thus, in this paper, critical management factors at each phase from design to installation was derived by researching case studies. Forwardly, it can be a basic guideline for applying Multi-trade MEP Ceiling Rack Prefabrication in Korea construction industry.