• 한국결정학회지
• /
• 제12권2호
• /
• pp.81-87
• /
• 2001

We have studied the effect of sintering temperature and time on the cation ordering and second phase formation in Ba(Mg/sub 1/3/Nb/sub 2/3/)O₃(BMN) microwave ceramics by using transmission electron microscopy. The relationship between the structural-chemical behavior arid microwave dielectric properties has also been investigated. It is revealed that according to the sintering conditions the BMN ceramics show very diverse local ordering behavior, such as the development of domain twinning and "core-shell"-structured grains and the formation of local disordered domains, though having 1 : 2 cation ordering structure basically. The disordered structure is found in Mg-excess region. Such local chemical variation seems to be caused by the formation of BaNb₂O/sub 6/-like second phase in its neigh-boring grain boundary. The microwave dielectric quality factor of the ceramics decreases greatly with the increase of the structural-chemical inhomogeneity and diversity.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
• /
• pp.609-612
• /
• 2006

The quality of the concrete compression strength can be determined after the passage of 28 days, but if any defect is found the quality of concrete after that length of time, there can be serious problems in dismantling and repair. Thus, in response to the use of concrete using non sintering cement (NSC), the present study purposed to propose a method of managing the strength of high strength concrete using NSC in comparison with high strength concrete using ordinary Portland cement (OPC) through early strength estimation using microwave, which enables the quick estimation of the strength of high strength concrete using NSC.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.400-403
• /
• 2008

We have investigated the electro-optical characteristics of AC-PDP with different MgO protective layers, which have been deposited by electron beam evaporation from various sintered pellets with different temperatures. We have measured the secondary electron emission coefficient ($\gamma$) by using the Gamma Focused Ion Beam ($\gamma$-FIB) system, the static margin, and the address delay time. Also, we have investigated photoluminescence (PL) characteristics for understanding the energy levels of MgO pellets and protective layers.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1989년도 춘계학술대회 논문집
• /
• pp.93-96
• /
• 1989

NTC thermistor was prepared by adding TiO$_2$and MnO$_2$on Fe$_2$O$_3$and the effects of additions were investigated. And the effects of compating pressure, sintering temperature, and sintering time were also experimented. Fe$_2$O$_3$is insulator in stoichiometric state and will be semiconductor by introducing Ti$^{+4}$, Sn$^{+4}$. These semiconducting material will show large negative temperature coeffecients and can be used as NTC thermistor.tor.

• Progress in Superconductivity
• /
• 제6권2호
• /
• pp.124-128
• /
• 2005

Homogeneous and fine powders for Bi-2223 tape were prepared by ultrasonic spray pyrolysis (SP) method from an aqueous solution of metal nitrates. Bi-2223 precursor powders were synthesized with various solutes concentration and pyrolysis temperature. The synthesized precursor powders had a narrow particle size distribution and an average particle size was $\~{\cal}um$. The reactivity of precursor powder by SP method is very high, attributed to the fine and narrow particle size distribution. Bi-2223/Ag tape was prepared using PIT method and followed by various sintering conditions. The precursor powder by SP method promoted a very quick formation of the Bi-2223 phase for short sintering time while the secondary phase such as large AEC phase and $Ca_2PbO_4$ were minimized for SP tapes.

• 한국결정성장학회지
• /
• 제12권3호
• /
• pp.144-148
• /
• 2002

수산화아파타이트/티타늄 복합체를 스파크 플라즈마 소결(SPS) 장치를 이용하여 4층 경사 기능 재료 (FGM)로 제조하였다. 수산화아파타이트/티타늄 복합체의 최대 밀도와 이축 강도는 $1200^{\circ}C$에서 8분 동안의 SPS 조건에서 얻었다. 그러나, 수산화아파타이트는 $1100^{\circ}C$에서 사칼슘인산염(TetCP)으로 분해되었고, 티탄산칼숨 화합물 ($CaTiO_3$)이 형성되었다. 수산화아파타이트에 티타늄을 첨가하면 수산화아파타이트가 저온에서 쉽게 분해되었다.

• 한국분말재료학회지
• /
• 제8권3호
• /
• pp.210-213
• /
• 2001

$Si_3N_4$/TiN nano/nano-type composites were successfully fabricated by the combination of a mechano-chemical grinding (MCG) method and a short time sintering process, and their wear resistance was evaluated. Powder mixtures of $\alpha-Si_3N_4$and Ti were prepared using mechano-chemical grinding process and the resulting nanocomposite powder mixtures were consolidated using pulsed electric current sintering (PECS). TEM observation showed that the nano/nano-type composites consisted of homogeneous and very fine matrix grains with the size less than 100 nm. The obtained $Si_3N_4$-based nano/nano-type showed high wear resistance and electric discharge machinability.

• 한국산학기술학회논문지
• /
• 제5권2호
• /
• pp.186-190
• /
• 2004

Nano size 몰드의 제작은 X-ray lithography 방법을 이용하여 몰드를 제작하고, micro size의 경우 Deep UV lithography 방법을 이용하여 몰드를 제작하고 있다. 본 연구에서는 SLS(Selective Laser Sintering)형 RP(Rapid Prototyping System)을 이용하여 미세구조 몰드를 제작하였으며, 패턴의 깊이는 400 ㎛까지 구현하였다. 제작된 몰드의 강도와 내열성을 높이기 위하여 전해도금을 이용하여 몰드의 표면에 Ni를 300 ㎛생성 시켰다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 정기총회 및 창립40주년기념 학술대회 학회본부
• /
• pp.220-223
• /
• 1987

In this paper, electro-optic characteristics of PLZT 7.6/70/30 composition in MPB regions, which antiferroelectric and ferroelectric phases coexist together, were studied. As sintering times are increased, Curie temperatures ore linearly decreased. And the antiferroelectric phase becomes more stronger when Curie temperatures are decreased. The crystal structure investigated by lie of X-ray analysis is proved to cubic in the thermally depoled specimen and rhombohedral in the poled specimen. Accordingly, the applicability of 7.6/70/30 specimen as image storage and display device is expected by the method for applying field induced reversible transitions between antiferroelectric(AFE) and ferroelectric(FE) phase.

• 한국분말재료학회지
• /
• 제5권1호
• /
• pp.35-41
• /
• 1998

The effect of Mn on the densification and the microstructural change in W heavy alley was investigated with adopting the improved Mn-adding method. In order to avoid the pore formation problems associated with Mn powder mixing to the other constituent powders, Mn was added afterwards to the sintered heavy alloy; Mn powder was spread homogeneously on the surface of the sintered heavy alloy compact, and this Mn powder contained specimen was resintered at the same sintering temperature. As expected, the resintered specimen showed the pore free microstructure because Mn was reduced separately from the other constituent elements. It was also founded that W grains grew rapidly at the initial stage of resintering treatment due to the activated reprecipitation of the excess W atoms substituted by Mn atoms, but the growth rate of W grains was slowly lowered with the prolonged sintering time, especially, compared to the Mn free heavy alloy. Such a retardation of grain growth should be attributed to the decreased W solubility in the Mn contented matrix phase. Furthermore, Mn addition resulted in the decrease of contiguity by improving the wetting between matrix phase and W grain.