• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.811-814
• /
• 1997

The injection molding process has been developed as a very important technology for the automotive and electric industries in recent years. But, in the injection molding products with rib-web structures, partial deformation by thermal volumetric shrinkage called Sink Mark, is occurred. In this study, to make explicitly characteristics of sink mechanism, an experimental approach was taken by using multi T-shaped mold cavity and FEM simulation. As a result, pressure on the packing process and the rib thickness are the most effective on sink mark depth. On the other hand, melt temperature has no effect on sink mark depth fot the same rib thickness.

• Design & Manufacturing
• /
• 제12권1호
• /
• pp.31-35
• /
• 2018

The peltier thermoelectric module are used to cool the heat generated by electronic equipment. In order to increase the efficiency of the peltier thermoelectric module, the heat must be released to the outside. A heat sink is used to discharge such heat to the outside. in this paper, two types of heat sinks with internal tunnels were designed. And the heating and cooling performance of the heat sink with internal tunnel structure was compared and analyzed through ANSYS. The heat sink of the A type had better heat transfer than the heat sink of the B type. Which is about 70% improved.

• 환경영향평가
• /
• 제19권6호
• /
• pp.625-631
• /
• 2010

The objective of this work was to investigate how carbon sink and sequestration of vegetation and soil in the development project area can impact the land use plan, in addition to carbon emission capacity of the development project when we conduct environmental impact assessment. Especially, we did this work for a development project of solar power plant which would be constructed in forest area. Through this work, we found that 1) the amount of carbon sink and sequestration largely decreased due to reduction of the green area, 2) in terms of carbon sink and sequestration, conservation of natural green area is better than construction of newly vegetated area, 3) biochar application into soil can become an alternative for increase of carbon sink, and 4) even though a solar power production does hugely reduce carbon emissions and offset the carbon sink and sequestration capacity from the forest, it is necessary to consider the public value of the forest(reduction of heat island, habitat etc.) in siting for development area.

• 조명전기설비학회논문지
• /
• 제28권7호
• /
• pp.19-25
• /
• 2014

In the LED lighting applications, because LED packages are the origin of heat generation, there are thermal design problem on heat sinks. In the thermal design, it is important to consider the total volume and the total weight of heat sink simultaneously. In this study, an Al 6063 heat sink was optimized using Computational Fluid Dynamics(CFD) simulation tool for the cooling of 30W LED module, and then the cooling performance and the total weight of heat sinks with Al 6063 and Thermal Conductive Polycarbonate(TCP) were compared under the same conditions. As the result of simulation, an Al 6063 heat sink was optimized with 22 ea. of fins and 1.6 mm of fin thickness. LED Junction Temperature of the TCP Heat Sink was $5.6^{\circ}C$ higher, but total weight of it was 47 % less than the Al 6063.

• Design & Manufacturing
• /
• 제2권2호
• /
• pp.33-37
• /
• 2008

This paper describes the optimization of injection molding conditions to minimize sink marks. Sink marks, which refer to a small depression on the surface opposite a thick wall thickness, are often encounted in injection molded plastic parts. Part geometry, material properties and processing conditions during injection molding can affect the sink mark depth. We designed the runner system which is possible balanced filling to cavities using CAE program and then obtained optimal processing conditions by Taguchi's Robust Design technique. By actual injection molding using optimized mold and molding conditions, it confirmed that sink mark depth decreased zero compared to 1mm level in the conventional mold and process.

• Design & Manufacturing
• /
• 제10권1호
• /
• pp.7-11
• /
• 2016

Sinks occurring in the rib portion of the testing product for the unpainteds are fatal defects at surface quality. In this study, we carried out moldflow analyses for several factors that affect the sinks. The result tells us large important effective factors on sinks by analyzing sink marks estimate. We expect practical use as reference for performing analysis or manufacturing products with rib designs and injection moldings which minimize sink-marks surrounded ribs.

• 한국정밀공학회지
• /
• 제25권7호
• /
• pp.111-115
• /
• 2008

This paper describes the optimization of injection molding conditions to minimize sink marks. Sink marks, which refer to a small depression on the surface opposite a thick wall thickness, are often encounted in injection molded plastic parts. Part geometry, material properties and processing conditions during injection molding can affect the sink mark depth. We designed the runner system which is possible balanced filling to cavities using CAE program $Moldflow^{TM}$ and then obtained optimal processing conditions by Taguchi's Robust Design technique. By actual injection molding using optimized mold and molding conditions, it confirmed that sink mark depth decreased zero compared to 1mm level in the conventional mold and process.

• 동력기계공학회지
• /
• 제10권4호
• /
• pp.65-70
• /
• 2006

This study is to experimentally evaluate the cooling performance of the Bonding type and Injection type of heat sink using three different kinds of industrial Peltier module by digital LabViewTM measurement. Injection type of heat sink could be more efficient for the heat transfer than Bonding type, even with 30% more radiating surface area. In addition, the experimental results revealed that the sufficient power supplied was able to show the better cooling performance of Peltier module. In order to verify the optimal cooling performance of the cooling device, two Peltier module, HMN 6040 and HMN 1550 with Bonding and Injection type of heat sink were used. The cooling performance with injection type of heat sink was 2.11% and 6.24% better than that with bonding type of heat sink under the HMN 6040 and HMN 1550, respectively.

• 한국통신학회논문지
• /
• 제41권11호
• /
• pp.1431-1439
• /
• 2016

본 논문은 센서 노드들의 에너지 소비를 줄이고 소스로부터 이동 싱크 그룹까지 데이터를 전달하기 위한 새로운 위치 서비스와 위치 기반 라우팅을 제안한다. 기존 방안들과는 다르게, 제안 방안은 그룹 영역 대신 싱크 그룹을 대표하는 리더 싱크 위치 정보를 사용한다. 그래서, 제안 방안은 소스와 리더 싱크 간의 위치 서비스와 위치 기반 라우팅을 위한 상위 계층과 리더 싱크와 멤버 싱크들 간의 위치 서비스와 라우팅을 위한 하위 계층으로 이루어진 계층적 위치 서비스와 위치 기반 라우팅을 사용한다. 각각의 상위와 하위 계층의 위치 서비스와 위치 기반 라우팅은 플러딩을 사용하지 않기 때문에 제안 방안은 센서 노드들의 에너지 소비를 줄일 수 있다. 다양한 시뮬레이션 결과는 제안 방안이 기존 방안보다 우수함을 증명한다.

• 한국산학기술학회논문지
• /
• 제13권5호
• /
• pp.2002-2008
• /
• 2012

최근 들어 전자제품 소형화로 인한 방열의 중요성이 대두되고 있는 가운데 다양한 소재의 히트싱크가 사용되고 있다. 본 연구에서는 태양광에너지 소재산업에서 발생하는 슬러리로부터 SiC를 성공적으로 분리하여 다공성 세라믹 히트싱크를 개발하였고 알루미늄 히트싱크, 순수 SiC 히트싱크와 방열성능 비교실험을 통해 다공성 재생 SiC 세라믹 히트싱크의 방열성능을 검증하였다. 실험 결과, 다공성 재생 SiC는 알루미늄 히트싱크 대비 방열성능이 우수함을 확인하였는데 이는 미세기공으로 인한 전열면적 증가에 기인한다. 또한, 수치해석을 사용하여 미세기공이 방열성능에 미치는 영향을 대류열전달계수 증가로 정량화하였다.