• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.15 no.9
• /
• pp.745-752
• /
• 1990

This paper deals with the path sensitization algrithm from PI to PO center on the nodes of high testability mainstay when CUT is tested by pseudo exhaustive testing. In CUT, the node definition of high testability mainstay treats the testability values of the entire nodes with the population composed of the raw data, and after we examined the level of significance(1-a) region, we accomplished in the estimation of the confidence interval of the testability. Focusing on the defined nodes of high testability mainstay, we performed the singular cover and consistency operation to the forward and backward logic gates. Thus, we easily generated the pseudo exhausitve test patterns. As a result, (1-a) region has 0.1579 and the pseudo exhaustive test patterns are least generated and the rate of test pattern is 1.22%, compared with exhaustive testing. (1-a) region has 0.2368 and this results exhibits the optimal performance of the singular cover and consistency operation. Applying the generated pseudo exhaustive test patterns to the stuck-at faults existing on the inputs and internal nodes in CUT, we verified this performance on the output. Thus, it is confirmed that functional testing of the proposed path sensitization algorithm is very useful.

• 제어로봇시스템학회:학술대회논문집
• /
• 1999.10a
• /
• pp.41-44
• /
• 1999

Nonlinear sliding surface design in variable structure systems for spacecraft attitude control problems is studied. A robustness analysis is performed for regular form of system, and calculation of actuator bandwidth is presented by reviewing sliding surface dynamics. To achieve non-singular attitude description and minimal parameterization, spacecraft attitude control problems are considered based on modified Rodrigues parameters(MRP). It is shown that the derived controller ensures the sliding motion in pre-determined region irrespective of unmodeled effects and disturbances.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2003.10a
• /
• pp.383-388
• /
• 2003

This paper deals with the singular stresses developed in a polymer coating on concrete due to temperature change. The boundary element method is employed to investigate the behavior of interface stresses. Numerical results show that very large stress gradients are present at the interface comer and such stress singularity dominates a very small region relative to layer thickness. Since the exceedingly large stresses at the interface corner cannot be borne by coating materials, local yielding or delamination can occur in the vicinity of free surface.

• The Journal of Engineering Geology
• /
• v.16 no.3 s.49
• /
• pp.255-263
• /
• 2006

In an electrical tomographic survey using an inclined borehole with a pole-dipole array, we must consider several factors: a singular point associated with zero potential difference, a spatial discrepancy between electrode and nodal point in a model due to a inclined borehole, and a variation of geometric factors in connection with a irregular topography. Singular points which are represented by the normal distance from current source to the ground surface can be represented by serveral regions due to a irregular topography of ground surface. The method of element division can be applied to the region in which the borehole is curved, inclined or the distance between the electrodes is shorter than that of nodal points, because the coordinate of each electrode cannot be assigned directly to the nodal point if several electrodes are in an element. Test on a three-dimensional (3-D) synthetic model produces good images of conductive target and shoves stable convergence.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.11C
• /
• pp.1510-1517
• /
• 2004

A new fingerprint image enhancement algorithm using multiresolution information and Gabor filter is proposed in this paper. The proposed algorithm performs selection of the region in image according to inclusion of singular points and then performs enhancement using Gabor filtering of the region adjusted in its size. Gabor filter using representative direction in the same block is used in the region that the direction of ridge is not changed much, while Gabor filter using pixel based direction is used in the region that the direction of ridge is changed much. This method can reduce processing time for enhancement using Gabor filter and preserve the merit of Gabor filter.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.1
• /
• pp.71-77
• /
• 2001

A flow visualization study using the oil film method and the smoke-laser light sheet arrangement is carried out to investigate the three-dimensional flow pattern around the free end surface region of a finite circular cylinder (aspect ratios of 1.25 and 4.25) mounted on a flat plate. The experiment is performed for the cases of two Reynolds numbers: 5.92${\times}$10$^3$and 1.48${\times}$10(sup)5. Various kinds of singular points on the free-end surface are disclosed from the oil surface flow visualization. The smoke-laser light sheet visualization, to aid in understanding the oil streak-line patterns, clearly demonstrates that a pair of tornado-like vortices marched along the downstream together with a pair of side tip vortices. A topological sketch to characterize the surface flow and the four vortices emanating from the top surface is included.

• Tribology and Lubricants
• /
• v.31 no.4
• /
• pp.163-169
• /
• 2015

This paper describes a design method for the corner radius of a contacting body using the theoretical approach of contact mechanics. A complete contact, as in the case of a sharp-cornered punch, produces singular contact traction: whereas, in an incomplete contact, the singular contact traction disappears because of the rounded corners, and the contact edges are within the rounded regions. The design method aims to determine the conditions of the contact force as well as the material properties in an incomplete contact. The incomplete contact changes into the complete contact again when the contact edges exceed the rounded regions owing to either an increased contact force or the compliance of the materials. The contact length of a rounded punch is used as a parameter to derive the required conditions. As a result, a design formula is obtained, which provides a minimum allowable radius when the materials, normal contact force, and the length of a flat region of the punch are predetermined. This work consists of two parts: Part I includes a theoretical background, design method, and formula, and Part II describes the actual process with the investigation of design parameters.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.25 no.5
• /
• pp.413-420
• /
• 2012

In this study, the Kernel integration scheme for 2D linear elastic direct boundary element method has been discussed on the basis of subparametric element. Usually, the isoparametric based boundary element uses same polynomial order in the both basis function and mapping function. On the other hand, the order of mapping function is lower than the order of basis function to define displacement field when the subparametric concept is used. While the logarithmic numerical integration is generally used to calculate Kernel integration as well as Cauchy principal value approach, new formulation has been derived to improve the accuracy of numerical solution by algebraic modification. The subparametric based direct boundary element has been applied to 2D elliptical partial differential equation, especially for plane stress/strain problems, to demonstrate whether the proposed algebraic expression for integration of singular Kernel function is robust and accurate. The problems including cantilever beam and square plate with a cutout have been tested since those are typical examples of simple connected and multi connected region cases. It is noted that the number of DOFs has been drastically reduced to keep same degree of accuracy in comparison with the conventional isoparametric based BEM. It is expected that the subparametric based BEM associated with singular Kernel function integration scheme may be extended to not only subparametric high order boundary element but also subparametric high order dual boundary element.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.3
• /
• pp.24-32
• /
• 1997

This paper is on a discrete controller order reduction with the closed-loop stability and performance guaranteed. to achieve this, after finding the solutionsof two lyapunov inequalities and balancing the full order controller system, we find the reudced order controlers using the balanced truncation (BT) and the balanced singular perturbation approximation (BSPA). When the solutions of the two lyapunov inequalities exist, it is shown that the resulting controllers guarantee the closed-loop stability, and .inf.-norm error bounds are derived for the closed-loop performance region for the BT and in low frequency region for the BSPA. Finally, a numerical example is given to illustrate the validity of the proposed method.

• Asian Journal of Atmospheric Environment
• /
• v.10 no.2
• /
• pp.80-89
• /
• 2016

In the complex terrain where local wind systems are formed, accurate understanding of regional wind variability is required for wind resource assessment. In this paper, cluster analysis based on the similarity of time-series wind vector was applied to classify wind regions with similar wind characteristics and the meteorological validity of regionalization method was evaluated. Wind regions in Jeju Island and Busan were classified using the wind resource map of Korea created by a mesoscale numerical weather prediction modeling. The evaluation was performed by comparing wind speed, wind direction, and wind variability of each wind region. Wind characteristics, such as mean wind speed and prevailing wind direction, in the same wind region were similar and wind characteristics in different wind regions were meteor-statistically distinct. It was able to identify a singular wind region at the top area of Mt. Halla using the inconsistency of wind direction variability. Furthermore, it was found that the regionalization results correspond with the topographic features of Jeju Island and Busan, showing the validity.