• Polymer(Korea)
• /
• v.29 no.2
• /
• pp.146-150
• /
• 2005

A nano-stereolithouaphy (NSL) apparatus has been developed for fabrication of microstructures with the resolution of 150 nanometers. In the NSL process, a complicated 3D structure can be fabricated by building layer by layer, so it does not require any sacrificial layer or any supporting structure. A laminated layer was fabricated by means of solidifying liquid-state monomers using two-photon absorption (TPA) which was induced by a femtosecond laser. When the fabrication of a 3D laminated structure was finished, unsolidified liquid-stage resins were removed to develop the fabricated structure by dropping several droplets of solvent, then the polymerized structure was only left on the glass substrate. A microstructure is fabricated by vector scanning method to save the fabrication time. The shell thickness of a structure is very thin within 200 nm, when it is fabricated by a single contour scanning (SCS) path. So, a fabricated structure can be deformed easily in the developing process. In this work, a double contour scanning (DCS) method was proposed to reinforce the strength of a shell typed structure, and a microcup was fabricated to show the usefulness of the developed NSL system and the DCS method.

• The Korean Journal of Pesticide Science
• /
• v.14 no.4
• /
• pp.401-406
• /
• 2010

This study was conducted to investigate the control effects of the environmental-friendly materials against major diseases of pear and to elucidate factors related to spore disperse of pear scab and pear rust. Spore disperse was deeply related ambient temperature in the early stage of disease occurrence and the maximum spore disperse was affected greatly by the air humidity, Percent of infected leaves of pear scab in plot treated with Trichoderma harzianum-YC459 was 29.3% and 43.3% in plot treated with Sulfur-80%. Two formulations above-mentioned were less effective to control pear scab than the chemical pesticide, hexaconazole. Control effect in plots single- and mixed-treated with Trichoderma harzianum-YC459, Sulfur-80% and hexaconazole against pear scab were compared with that in plot treated with chemicals by conventional application schedule in pear orchard. The incidence of pear scab was lower in plot treated with the environmental-friendly materials than that of untreated plot. However there was no significant difference among the treatments at the 5% level. Application of Sulfur-80% reduced significantly the incidence of pear scab (7.8%) compared to that (10.3%) in plot treated by conventional application schedule in organically cultivated pear orchard. Alternative application of Trichoderma harzianum-YC459 and Sulfur-80% (4.3%) suppressed the incidence of pear rust than that (7.1%) in plot treated by conventional application schedule in organically cultivated pear orchard.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.12
• /
• pp.1258-1268
• /
• 2014

In this paper, we propose and design IBFD system based on DCR. And then, we analyze effect of DC offset by self-interference in the proposed system. Also, we evaluate BER performance of the proposed system according to DC offset. As a result of the simulation, we can confirm that when the self-interference is not completely cancelled by the RF cancellation, linearity of desired signal and self-interference is distorted by DC offset. Also, in the proposed system using m-QAM modulation, DC offsets of multi-level are caused by self-interference with m-QAM modulation. As a result, constellations of desired signal and self-interference are greatly distorted. In contrast, in the proposed system using m-PSK modulation, DC offset of single level is caused by self-interference with m-PSK modulation. In this condition, we confirm that distortion of constellations of desired signal and self-interference is less than when using m-QAM modulation. That is, we can confirm that m-PSK modulation is effective than m-QAM modulation in DCR based IBFD system. Also, we can confirm that it is important to cancel self-interference as much as possible in RF-stage.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.8
• /
• pp.1606-1616
• /
• 2011

The blood pressure measuring equipment, which is being supplied and used most widely by being recognized convenience and accuracy now generally, is oscillometric blood pressure monitor. However, a change in blood pressure is basically influenced by diverse elements such as each individual's physiological status and physical condition. Thus, the measurement of blood pressure, which used single element called oscillation in blood pressure of being conveyed to cuff, is not considered on physiological elements such as cardiovascular system status and blood vessel stiffness index, and on external elements, thereby being quite in error. Accordingly, this study detected diverse bio-signals and body informations in each individual as the measurement subject such as ECG, PPG, and Korotkoff Sound in order to enhance convenience and accuracy of measuring blood pressure in the complex measurement equipment, thereby having extracted regression method for compensation in error of oscillometric blood pressure measurement on the wrist, and having improved accuracy of measuring blood pressure. To verify a method of improving accuracy, the blood pressure value in each of SBP, DBP, MAP was acquired through 4-stage experimental procedure targeting totally 51 subjects. Prior to experiment, the subjects were divided into two groups such as the experimental group for extracting regression method and the control group for verifying regression method. Its error was analyzed by comparing the reference blood pressure value, which was obtained through the auscultatory method, and the oscillometric blood pressure value on the wrist. To reduce the detected error, the blood pressure compensation regression method was calculated through multiple linear regression analysis on elements of blood pressure, individual body information, PTT, HR, K-Sound PSD change. Verification was carried out on improving significance and accuracy by applying the regression method to the data of control group. In the experimental results, as a result of confirming error on the reference blood pressure value in SBP, DBP, and MAP, which were acquired through applying regression method, the results of $-0.47{\pm}7.45$ mmHg, $-0.23{\pm}7.13$ mmHg, $0.06{\pm}6.39$ mmHg could be obtained. This is not only the numerical value of satisfying the sphygmomanometer reference of AAMI, but also shows the lower result than the numerical value in SBP : $-2.5{\pm}12.2$ mmHg, DBP : $-7.5{\pm}8.4$ mmHg, which is the mean error in the experimental results of Brram's research for verifying accuracy of Omron RX-M, which shows relatively high accuracy among wrist sphygmomanometers. Thus, the blood pressure compensation could be confirmed to be made within significant level.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.4
• /
• pp.34-40
• /
• 2004

In this paper, we have studied the OCT(Optical Coherence Tomography) system which has been advantages of high resolution, 2-D cross-sectional images, low cost and small size configuration. The characteristics of light source determine the resolution and coherence length. The light source has a commercial SLD with a central wavelength of 1,285 ill11, 35.3 nm(FWHM). The optical delay line is necessary to make equal with the optical path length to scattered light or reflected light from a sample. In order to make equal the optical path length, the stage that is attached to a reference mirror is controled by a step motor. And the interferometer is configured with the Michelson interferometer by using a single mode fiber, and the scanner can be focused on the sample by using a reference ann Also, the 2-dimension cross-sectional images were measured with scanning the transverse direction of the sample by using a step motor. After detecting the internal signal of lateral direction, a scanner is moved to obtain the cross-sectional image of 2-dimension by using step motor. A photodiode, which has high detection sensitivity and excellent noise characteristics has been used. The detected small signal has a noise and interference. After filtering and amplifying the signal, the output signal is demodulated the waveform And then, a cross-sectional image is seen through converting this signal into a digitalized signal by using an AID converter. The resolution of the sample is about 30${\mu}{\textrm}{m}$, which corresponds to the theoretical resolution. Also, the cross-sectional images of onion cells were measured in real time scheme.

• Korean Journal of Soil Science and Fertilizer
• /
• v.15 no.4
• /
• pp.233-240
• /
• 1982

This study was conducted to elucidate the translocation pattern of photosynthate labelled by $^{14}C$ in rice cultivars and the effects of nutrient composition on the translocation in rice plant during ripening, Showing coincidence between the grain filling rate and the translocation of $^{14}C$ into the grain during ripening period, the translocation patterns of cultivars tested were grouped by three; 1) the late dominance type (Akibare), 2) the early dominance type (Taebaegbyeo, Chupungbyeo), and 3) the semi-late dominance type (Milyang #23, Milyang #42, and Yushin). The negative relation ship existed between the translocation ratio of $^{14}C$ into the grain and the nitrogen content in plants, but not significant, The nutrient depletion of P, K, Ca, Mg, and Si in water medium from the panicle initiation to the heading stage resulted in the decrease of grain weight by 4 to 12 percent and the increase of translocation of $^{14}C$ into grain assimilated at heading. The effect of resupply of these nutrients after heading was recognized by the order of P>Mg>K and Ca. But the effect of Si resupply was hardly recognized in increasing grain weight. The photosynthetic rate was greatly affected by the nitrogen status and the depletion of P, K, and Ca decreased the photosynthetic rate in single leaf at heading, while the depletion of Si enhanced the rate.

• Journal of Chest Surgery
• /
• v.12 no.4
• /
• pp.324-335
• /
• 1979

During the period of 4 years from August 1975 to August 1979 one hundred and forty seven cases of lung cancer were seen at Paik Foundation Hospital in Seoul, Korea. Among these 147 cases, 104 patients had primary carcinoma of the lung and the remainder was metastatic carcinoma to the lung. Among these 104 primary carcinoma patients, 73 cases were proven histologically as primary carcinoma of the lung. There were three cases of alveolar cell carcinoma [Table 1 ]. This clinical observation is based on those 73 cases including three case reports of the alveolar cell carcinoma. 1. Peak incidence was observed in the 5th decade of life. Male to female ratio was 2 to 1 [Fig. 1]. 2. Pathological classifications were as follows: epidermoid carcinoma, 24 cases [32.9%]; undifferentiated carcinoma, 20 cases [27.4%]; adenocarcinoma, 15 cases [20.5%]; bronchioloalveolar carcinoma [5.5%] and positive cytology, 10 cases [13.7%] [Fig. 2]. 3. Evidence of inoperability was observed in 55 patients [75% of the 73 cases] [Table 3]. 4. Among those 73 cases, operability was evaluated in 18 patients or 25%. One patient refused operation and 17 patients [23.6%] were explored. In 11 [15%] out of 17 patients, thoracotomies were performed. Six cases were pneumonectomies and 5 cases were lobectomies or bilobectomies [Fig. 3]. 5. First case of alveolar cell carcinoma was a 46 year-old housewife complaining of cough and hemoptysis for one year. The plain chest X-ray and bronchogram showed characteristic pictures as Figures 4 and 5. A pneumonectomy was carried out. Histologically, a beautiful alveolar carcinoma consisted of the characteristic tall columnar epithelial cells, which were lining the alveolar spaces as seen in Figures 6, 7, 8, and 20. 6. In the second case of 41 year old male, predominant clinical feature was single, well defined mass in the right lower lobe [Fig. 10 and 11] on chest X-ray. Bilobectomized specimen showed fragile, soft and hard tissue containing mucoid secretions and focal yellowish necrosis with pigmentation on cut surface [Fig. 12]. Slides showed tumor cells lined up along the alveolar septa with papillary projections [Fig. 13 and 14]. 7. Third case of alveolar cell carcinoma was a 50-year-old housewife with hemoptysis. An outstanding clinical picture was a round to lobulated mass in the right upper lobe [Fig. 16]. She is living now, 2 years and 1 month post-operatively, but has arrived at terminal stage with military nodular disseminations to the contralateral lung [Fig. 19].

• Journal of Energy Engineering
• /
• v.20 no.3
• /
• pp.185-190
• /
• 2011

This paper describes design, fabrication, and evaluation of the conduction cooled high temperature superconducting (HTS) magnet for superconducting magnetic energy storage (SMES). The HTS magnet is composed of twenty-two of double pancake coils made of 4-ply conductors that stacked two Bi-2223 multi-filamentary tapes with the reinforced brass tape. Each double pancake coil consists of two solenoid coils with an inner diameter of 500 mm, an outer diameter of 691 mm, and a height of 10 mm. The aluminum plates of 3 mm thickness were arranged between double pancake coils for the cooling of the heat due to the power dissipation in the coil. The magnet was cooled down to 5.6 K with two stage Gifford McMahon (GM) cryocoolers. The maximum temperature at the HTS magnet in discharging mode rose as the charging current increased. 1 MJ of magnetic energy was successfully stored in the HTS magnet when the charging current reached 360A without quench. In this paper, thermal and electromagnetic behaviors on the conduction cooled HTS magnet for SMES are presented and these results will be utilized in the optimal design and the stability evaluation for conduction cooled HTS magnets.

• Korean Journal of Head & Neck Oncology
• /
• v.17 no.2
• /
• pp.190-193
• /
• 2001

Background and Objectives: Reliable and versatile free flap has become a mainstay in reconstruction of the head and neck. But until now pectoralis major myocutaneous flap (PMMCF) as workhorse is useful and has some advantages such as good viability, one-stage reconstruction and carotid protection. The objective of this study was to review the role and indication of PMMCF in this era of potent free flaps for head and neck reconstruction. Patients and Methods: Sixty one PMMCF and one hundred forty six free flaps used for head and neck reconstruction between 1991 and 2001 were reviewed retrospectively. We compared the applied sites of flap, the flap failure rate and complications. Results: Contrary to the free flap, use of PMMCF has gradually decreased after the middle of 1990s. PMMCF were mainly used for mucosal defect(33cases, 54.1%) and cervical skin defect(22cases, 36.1%) and free flap were mainly used for mucosal defect(129cases, 88.4%). In point of use of PMMCF according to years, from 1991 to 1997, 30cases(70%) are used to reconstruct mucosal defect and 12cases(29%) are used to reconstruct skin defect. But from 1998 to 2001, only 2cases(10.5%) are used to reconstruct mucosal defect and 13cases(68.4%) are used to reconstruct neck skin defect. In case of free flap, from 1991 to 1997, 41cases (87%) are used to reconstruct mucosal defect and from 1998 to 2001 88cases(89%) are used as same purpose. Three major necrosis (more than 50%) deveolped in 61 PMMCF (4.9%) and three major necrosis developed in 146 free flaps(2.1%). Conclusion: PMMCF is no longer flap of choice for primary reconstruction but it is a still one of a good tool in some head and neck reconstruction such as covering single wide defect of face or neck skin, back-up procedure of free flap, postoperative status, treatment of pharyngocutaneous fistula and covering vital structure.

• Korean Journal of Head & Neck Oncology
• /
• v.27 no.2
• /
• pp.198-203
• /
• 2011

Background and Objectives : Distinguishing benign from malignant lesion in thyroid noddex is important but clinically difficult. FNAB is the first investigation of choice. However, cytologic results are often indeterminable. In those cases, additional molecular biologic tests are helpful. If serologic tests are available to predict malignancy, it can be useful to fortify accurate diagnosis. We analyzed whether TSH or FreeT4 level could be used as a predictor of malignancy. Materials and Methods : From January 2008 to March 2009, 540 patients received one of thyroidectomy in a single center. We only included 167 patients from 18 to 65 years old without cardiopulmonary or renal disorders. All the patients were in euthyroid state and took no medications, which affect the thyroid function. We reviewed charts retrospectively to find out differences in TSH level and FreeT4 level between the benign and malignant groups. Results : In this study, all the patients with malignancy had the papillary cancer. In benign group, average TSH level came out to be 1.48mU/L, whereas the average TSH level of malignant group was 1.98 mU/L. Moreover, the higher the cancer stage was, the higher the TSH level was. Although we have adjusted factors that can affect TSH level(age, sex, race, goiter type), we still received the same result. The risk of malignant cancer increased in proportion with TSH level within the normal range. In free T4 level, there was no difference between benign and malignant group. Conclusion : We propose that TSH level can play a role as one of the predictors for thyroid cancer. However, there is limitation because all the patients with malignancy in this study have papillary cancer. Thus, we can apply this result only in papillary cancer, and we need more study for other types of thyroid cancer.