• Journal of the Korean Institute of Telematics and Electronics
• /
• v.22 no.6
• /
• pp.34-40
• /
• 1985

Characteristics of GaAE epilayers grown on (100) CaAs wa(tors by molecular beam epitaxy (MBE) under various single crystal growing conditions were investigated. In fabrica-ting GaAs, epilayer by MBE, the most important factors are a substrate temperature(ts) and a flux density ratio (As/Ga). In this experiment, the substrate temperature was varied in the range of 48$0^{\circ}C$ to $650^{\circ}C$ and As and Ga cell temperatures were varied in the range of 218$^{\circ}C$ to 256$^{\circ}C$ and 876$^{\circ}C$ to 98$0^{\circ}C$, respectively. At the substrate temperature of 54$0^{\circ}C$, As cell temperature of 23$0^{\circ}C$, and Ga cell temperature of 91$0^{\circ}C$, the As/Ga ratio was 5"10, the surface morphology was most smooth . Investigation of As-stabilized surface by RHEED and of depth profile by SIM5 showed that As is less stable than Ga. Also, X-ray diffraction measurement revealed that single crystals of (400) and (200) were formed at the both sub-strate temperatures of 52$0^{\circ}C$ and 54$0^{\circ}C$.TEX>.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.218-219
• /
• 2000

정보화 사회의 발전과 더불어 디스플레이는 CRT의 고성능화와 병행해 각종 평판 디스플레이의 전개와 실용화가 진행되어 왔다. TV용은 CRT (cathod ray tube)방식이 시장의 90% 이상을 차지하고 있으며, 앞으로도 연간 약 3%의 성장이 예상된다. CRT는 많은 공간 소비와 높은 소비전력 유해파 등으로 인하여 가정용 TV의 경우 PDP가 컴퓨터 모니터는 LCD방식이 디스플레이 시장의 주역을 담당하고 있으며, 그 성능, 비용, 용도에 따라 나뉘어 빠른 비율로 성정해 갈 것으로 예상된다. 이러한 여러 가지 평판 디스플레이들은 특성에 따라 EL과 FED는 10인치 이하의 소형 디스플레이에 주로 사용되어 지며, LCD는 10인치 이하에서부터 30인치까지의 소·중형, CRT는 10인치 이상 40인치 이하의 중·대형에 사용되어 지고, PDP는 30인치 이상의 대형 디스플레이에 사용된다. 대형 PDP나 LCD는 휘도를 높이고 양질의 영상 표현을 위해서는 cell-gap의 균일성이 요구되어 진다. cell-gap의 측정은 제품이 거의 완성 단계 있을 때 이루어져야 함으로 비접촉식이 필연적이며, 실시간 적이어야만 가능하다. (중략)

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.489-489
• /
• 2011

The effect of Si quantum dots for solar cell appications was investigated. The 5 ~ 10 nm Si nanoparticle was fabricated on p-type single and poly crystalline wafer by magnetron sputtering and laser irradiation process. Scanning electron microscopy (SEM), atomic force measurement (AFM) and transmission electron microscopy (TEM) images showed that the Si QDs array were clearly embedded in insulating layer ($SiO_2$). Photoluminesence (PL) measurements reliably exhibited bandgap transitions with every size of Si QDs. The photo-current measurements were showed different result with size of QD and number of superlattice.

• Proceedings of the KIEE Conference
• /
• 2000.11c
• /
• pp.513-515
• /
• 2000

In this paper, new Partial Discharge (PD) detection technique using Pockels-cell was proposed. For this purpose, PD was generated from needle-plane electrode in air and detected by optical measuring system using Pockets cell, based on Mach-Zehnder interferometer, consisting of He-Ne laser, single mode optical fiber, 50/50 beam splitter and photo detector. We show the characteristic of the proto-type sensor for the corona discharge.

• Proceedings of the KIEE Conference
• /
• 1993.07a
• /
• pp.450-452
• /
• 1993

In this study, a method is suggested to design the A/D conversion system which has high resolution to convert load cell signal. First, hardware was designed to reduce the offset voltage of integrator and comparator. And then, a calibration software technique was performed to obtain the stable data from A/D converter. The optimal parameters of each elements in the circuits was selected using the SPICE simulation. The main advantage of our method is high precision A/D converter can be constructed with low cost and high confidence. Therefore proposed method is expected to be used in the industrial field where a high precision measurement is required.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.149-149
• /
• 2009

Generally, Nafion ionomer is used in the polymer electrolyte fuel cell (PEFC) electrodes to achieve high power density. At the high temperature operation of PEFC, however, ionic conductivity of Nafion remarkably decreased due to the evaporation of water in Nafion polymer. Recently, many researchers have focused on using the Ionic Liquids(ILs) instead of water in Nafion polymer. ILs have intrinsic properties such as good electrochemical stability, high ionic conductivity, and non-flammability. Especially, ILs play a crucial role in proton conduction by the Grottuss mechanism and act as water in water-free Nafion polymer. However, it was found that the ILs was leached out of the polymer matrix easily. In this study, we prepared membrane electrode assemblies with various contents of ILs. The effect of ILs in the electrode of each designed was investigated by a cyclic voltammetry measurement and the cell performance obtained through a single cell test using H2/Air gases. Electrodes with different contents of ILs in catalyst layer were examined at high temperature and low humidified condition.

• Journal of Energy Engineering
• /
• v.23 no.3
• /
• pp.157-162
• /
• 2014

In this research, we investigate electrical performance and electrochemical properties of carbon supported Pt (Pt/C) that is synthesized by polyol method. With the Polyol_Pt/C that is adopted for oxygen reduction reaction (ORR) as cathode of proton exchange membrane fuel cells (PEMFCs), their catalytic activity and ORR performance and electrical performance are estimated and compared with commercial Pt/C(Johnson Mattey) catalyst. Their electrochemically active surface (EAS) area are measured by cyclic voltammetry (CV), respectively. On the other hand, regarding ORR activity and electrical performance of the catalysts, (i) linear sweeping voltammetry by rotating disk electrode and (ii) PEMFC single cell tests are used. The CV measurement demonstrate EAS of Polyol_Pt/C is compared with commercial JM_Pt/C. In case of Polyol_Pt/C, its half-wave potential, kinetic current density are excellent. Based on data obtained by half-cell test, when PEMFC single cell tests are carried out, current density measured at 0.6V and maximum power density of the PEMFC single cell employing Polyol_Pt/C are better than those employing commercial Pt/C. Conclusively, Polyol_Pt/C synthesized by modified polyol process shows better ORR catalytic activity and PEMFC performance than other catalysts.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.3
• /
• pp.184-196
• /
• 2020

In this paper, a single-bit 2nd-order delta-sigma modulator with the architecture of cascaded-of-integrator feedforward (CIFF) is proposed for precision measurement of current flowing through a secondary cell battery in a battery management system (BMS). The proposed modulator implements two switched capacitor integrators and a single-bit comparator with peripheral circuits such as a non-overlapping clock generator and a bias circuit. The proposed structure is designed to be applied to low-side current sensing method with low common mode input voltage. Using the low-side current measurement method has the advantage of reducing the burden on the circuit design. In addition, the ±30mV input voltage is resolved by the ADC with 15-bit resolution, eliminating the need for an additional programmable gain amplifier (PGA). The proposed a single-bit 2nd-order delta-sigma modulator has been implemented in a 350-nm CMOS process. It achieves 95.46-dB signal-to-noise-and-distortion ratio (SNDR), 96.01-dB spurious-free dynamic range (SFDR), and 15.56-bit effective-number-of-bits (ENOB) with an oversampling ratio (OSR) of 400 for 5-kHz bandwidth. The area and power consumption of the delta-sigma modulator are 670×490 ㎛2 and 414 ㎼, respectively.

• Journal of the Korean Vacuum Society
• /
• v.21 no.1
• /
• pp.62-68
• /
• 2012

The conversion efficiency of solar cells depending on incident angle of light is important for building-integrated photovoltaics (BIPV) applications. The quantum efficiency is the ratio of the number of charge carriers collected by the solar cell to the number of photons of a given energy shining on the solar cell. The analysis of angle dependence of quantum efficiencies give more information upon the variation of power output of a solar cell by the incident angle of light. The variations in power output of solar cells with increasing angle of incidence is different for the type of cell structures. In this study we present the results of the quantum efficiency measurement of single-crystalline silicon solar cells and a-Si:H thin-film solar cells with the angle of incidence of light. As a result, as the angle of incidence increases in single-crystalline silicon solar cells, quantum efficiency at all wavelength (300~1,100 nm) of light were reduced. But in case of a-Si:H thin-film solar cells, quantum efficiency was increased or maintained at the angle of incidence from 0 degree to about 40 degrees and dramatically decrease at more than 40 degrees in the range of visible light. This results of quantum efficiency with increasing incident angle were caused by haze and interference effects in thin-film structure. Thus, the structural optimization considering incident angle dependence of solar cells is expected to benefit BIPV.

• Journal of Microbiology and Biotechnology
• /
• v.20 no.4
• /
• pp.712-717
• /
• 2010

Cytochrome P450 enzymes (P450s) are involved in the synthesis of a wide variety of valuable products and in the degradation of numerous toxic compounds. The P450 BM3 (CYP102A1) from Bacillus megaterium was the first P450 discovered to be fused to its redox partner, a mammalian-like diflavin reductase. Here, we report the development of a whole-cell biocatalyst using ice-nucleation protein (Inp) from Pseudomonas syringae to display a hemeand diflavin-containing oxidoreductase, P450 BM3 (a single, 119-kDa polypeptide with domains of both an oxygenase and a reductase) on the surface of Escherichia coli. The surface localization and functionality of the fusion protein containing P450 BM3 were verified by flow cytometry and measurement of enzymatic activities. The results of this study comprise the first report of microbial cell-surface display of a heme- and diflavin-containing enzyme. This system should allow us to select and develop oxidoreductases containing heme and/or flavins into practically useful whole-cell biocatalysts for extensive biotechnological applications, including selective synthesis of new chemicals and pharmaceuticals, bioconversion, bioremediation, live vaccine development, and biochip development.