• 한국수소및신에너지학회논문집
• /
• 제21권6호
• /
• pp.540-546
• /
• 2010

In order to confirm the effect of Nafion ionomer content in catalyst layer on the performance of PEMFC, we have fabricated several electrodes which were prepared by varying the quantity of Nafion ionomer from 24 wt.% to 39 wt.% in catalyst layer. The effect of Nafion ionomer of each electrode was evaluated with cyclic voltammetry measurement. In addition, cell performance was obtained through single cell test using hydrogen and air. The Pt utilization and performance of single cell were changed by addition of Nafion ionomer to the electrode. Single cell fabricated with 33 wt.% of Nafion ionomer in catalyst layer showed the maximum Pt utilization and performance.

• 한국생산제조학회지
• /
• 제19권6호
• /
• pp.724-730
• /
• 2010

A load cell is a converter that generates voltage signals when a certain force is effected in a given direction. An essential measurement device for electronic scales that indicate weight by numbers. These load cells are being applied in various areas such as daily life, distribution, laboratory and industrial. Recently the study to manufacture load cells in a more simple method while increasing performance is being persisted. In this study based on the comparison of load cells manufactured through single surface processing using strain gauges. Those manufactured through dual surface processing using strain gauges. Ultimately persist a more simple method of load cell manufacturing while increasing its performance. The elements that were compared were linearity, hysteresis, creep and eccentricity which are short tenn performance factors. The conclusion was that single surface processing showed almost identical data as that of dual surface processing, and the load cell error rate(0.005%) also excess regulation. The manufacturing time was shortened while mass-production was possible. Which indicates a development in the weighing industry.

• 한국수소및신에너지학회논문집
• /
• 제20권3호
• /
• pp.208-215
• /
• 2009

PEMFC stack power output is needed to be around 100 kW to meet the requirements of automotive application and scaling-up the active area of the stack cells will allow a higher power. In the case of scaling-up the active area of cells, it is difficult to obtain uniform in-plane internal conditions such as temperature, relative humidity and stoichiometry of the feed gas. These ununiformity with the location in the cell would affect both the performance and durability of the stack, so it is important to understand phenomena in the cell for improving them. In this study, the current density, electrochemical resistance and performance distribution measurement was performed to understand the ununiformity in a single cell using in-situ method; (1) Current Density Distribution (CDD) Device and (2) Segmented Cell Fixture. The influence of location of feed gas on the performance of a single cell was experimentally measured and discussed by using a segmented single cell which was composed of 8 compartments. The correlation between the location and performance in a single cell was discussed by these two tools and it was extended between the local characterization and the durability in a MEA by comparing the used cell with a fresh one. It was also studied in terms of electrochemistry by Electrochemical Impedance Spectroscopy.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.572-575
• /
• 2008

Flow-field design has much influence over the performance of proton exchange membrane fuel cell (PEMFC) because it affects the pressure magnitude and distribution of the reactant gases. To obtain the pressure magnitude and distribution of reactant gases in four kinds of flow-field designs without additional measurement equipment, computational fluid dynamics (CFD) analysis was performed. After the CFD analysis, the performance values of PEMFC according to the flow-field configurations were measured via a single cell test. As expected, the pressure differences due to different flow-field configurations were related to the PEMFC performance because the actual performance results showed the same tendency as the results of the CFD analysis. A large pressure drop resulted in high PEMFC performance. So, the single serpentine configuration gave the highest performance. On the other hand, the parallel flow-field configuration gave the lowest performance because the pressure difference between inlet and outlet was the lowest.

• Journal of Mechanical Science and Technology
• /
• 제20권3호
• /
• pp.297-309
• /
• 2006

This paper deals with a novel structure for single-cell characterization which makes use of bimorph micro thermal actuators combined with electrical sensor device and integrated microfluidic channel. The goal for this device is to capture and characterize individual biocell. Quantitative and qualitative characteristics of bimorph thermal actuator were analyzed with finite element analysis methods. Furthermore, optimization for the dimension of cantilevers and integrated parallel probe systems with microfluidic channels is able to be realized through the virtual simulation for actuation and the practical fabrication of prototype of probes. The experimental value of probe deflection was in accordance with the simulated one.

• 로봇학회논문지
• /
• 제11권3호
• /
• pp.133-139
• /
• 2016

Increasing interest of human health, building bio-database (Bio DB) has been become a hot issue in life science. Consequently, Single Cell Analysis (SCA) which can explain biodiversity of lives has been a significant factor for building Bio DB. In numerous studies from these analyses, they have been showed that mechanical properties of cells can serve explanation of biological heterogeneity and criterion of disease states. Therefore, measuring mechanical properties of cells have great potential to be used in bio-medical applications. However, traditionally, many researchers have undergone difficult and time consuming work because handling small sized cells usually requires high-skilled technique. Thus, this paper shows robotized stiffness measurement technique using fixed ended beam sensor, precision motorized stage and substrate which have wall structure.

• 한국의학물리학회지:의학물리
• /
• 제25권2호
• /
• pp.116-121
• /
• 2014

본 본문은 Bio-MEMS 공정으로 제작한 마이크로 세포 분석 바이오칩을 사용하여 적혈구의 광학적 특성을 전압으로 측정한 실험이다. Bio-MEMS 공정을 이용하여 세포의 원활한 이동과 측정 분석에 사용되는 글라스에 채널 패턴 에칭을 위하여 포토리소그래피(photolithography)와 산화완충식각(BOE: buffered oxide etchant) 공정 조건, 세포 분석과 정보 전달에 사용되는 광섬유의 에칭을 위하여 산화완충식각 공정 조건, 세포나 유체를 칩과 외부의 전달 등에 사용되는 글라스의 홀을 위하여 전기화학방전(ECD: electro chemical discharge) 공정 조건, 글라스 접합을 위한 자외선반응접합(UVSA: ultraviolet sensitive adhesives) 공정 조건을 정립하였다. 또한 유체나 세포의 흐름 제어를 위한 라미나 흐름 조건, 적혈구세포에 대한 산란빔 파형을 측정하였다. 적혈구 실험을 통하여 출력 광섬유의 각도에 따른 산란빔이 출력측의 광섬유각도가 $0^{\circ}$일 때 약 17 V, 각도가 $5^{\circ}$일 때 약 10 V, 각도가 $10^{\circ}$일 때 약 6 V, 각도가 $15^{\circ}$일 때 약 4 V의 전압(Vpp)으로 측정되었다. 따라서 마이크로 세포 분석 바이오칩 제작의 소형화, 단순화, 공정신간 단축, 정량화하였고 적혈구의 광학적 특성을 측정을 측정함으로써 의공학(biomedical), 바이오칩공학(biochip), 반도체공학(semiconductor), 생물정보학(bioinformatics) 등의 응용과학 분야 발전에 기여할 것으로 기대한다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제40권9호
• /
• pp.749-755
• /
• 2016

본 연구에서는 고가의 3-D 로드셀을 대체하기 위해 1축 압축 로드셀 배열을 사용한 새로운 픽 커터 3축 절삭력 측정방법을 제안하였다. 제안한 절삭력 측정방법은 4개의 1축 압축 로드셀과 숄더 볼트를 통해 기계적 구속을 만들어 3축 절삭력을 측정할 수 있다. 유한요소해석을 통해 제안한 새로운 절삭력 측정방법을 타당성을 확인하였으며, 최종적으로 실제 선형 암반절삭 시험을 통해 제안한 새로운 측정방법의 3축 힘 측정 정확도를 확인하였다. 시험 결과 새로운 절삭력 측정방법은 상대오차가 약 6% 이내이므로, 기존의 3-D 로드셀을 대체할 수 있음을 확인하였다. 더불어, 기존 고가의 3-D 로드셀 대비 약 20-30%의 비용만으로 구축 가능하므로 절삭력 측정에 사용되는 비용을 크게 줄일 수 있다.

• 한국환경성돌연변이발암원학회지
• /
• 제21권2호
• /
• pp.89-94
• /
• 2001

Recently, single cell gel electrophoresis, also known as comet assay, is widely used for the detection and measurement of DNA strand breaks in vitro and in vivo in many toxicological fields such as radiation exposure, human monitoring and toxicity evaluation. As well defined, comet assay is a sensitive, rapid and visual method for the detection of DNA strand breaks in individual cells. Briefly, a small number of damaged cells suspended in a thin agarose gel on a microscope slide were lysed, unwinded, electrophoresed, and stained with a fluorescent DNA binding dye. The electric current pulled the charged DNA from the nucleus such that relaxed and broken DNA fragments migrated further. The resulting images which were subsequently named for their appearance as comets, were measured to determine the extent of DNA damages. However, some variations could be occurred in procedures, laboratories's conditions and kind of cells used. Hence, to overcome and to harmonize these matters in comet assay, International Workshop on Genotoxicity Test Procedure (IWGTP) was held with several topics including comet assay at Washington D.C. on March, 1999. In spite of some consensus in procedures and conditions in IWGTP, there are some problems still remained to be solved. In this respect, we attempted to set the practical optimal conditions in the experimental procedures such as lysis, unwinding, electrophoresis and neutralization conditions and so on. First of all, we determined optimal lysis and unwinding time by using 150 $\mu$M methyl methanesulfonate (MMS) which is usually used concentration. And then, we determined optimal positive control concentrations of benzo(a)pyrene (BaP) and MMS in the presence and absence of S9 metabolic activation system, respectively.

• 전기학회논문지
• /
• 제60권1호
• /
• pp.100-104
• /
• 2011

In this work, an optimum condition of electrolytes preparation for photovoltaic cells application was investigated experimentally in terms of impedance and conversion efficiency of the cells. 3-methoxyppropionitrie and redox pairs with LiI and $I_2$ were used as stable solvents for fabrication of electrolyte. Efficiency comparison of the prepared cells carried out for various additives and ionic liquids. From the results, there was an optimum concentration (about 0.3 M) of ionic liquids for efficient cell fabrication. For case of electrolyte using single DMAp additive, the maximum conversion efficiency of the cell was 6.4%($V_{oc}$: 0.78V, $J_{sc}$: 14.4 mA/$cm^2$, ff: 0.57). For case of electrolyte using both DMAp and CEMim additives, the maximum conversion efficiency of the cell was 7.2%($V_{oc}$: 0.79V, $J_{sc}$: 16 mA/$cm^2$, ff: 0.57). From the result of electrochemical impedance measurement, both Z1 and Z3 values of binary additives-based cell decreased compared to those of single additive-based. This is due to the decreased in internal and charge transfer resistivities of the cells.