• 대한두경부종양학회:학술대회논문집
• /
• 대한두경부종양학회 2001년도 제17차 학술대회 및 제6차 심포지움
• /
• pp.71-71
• /
• 2001

• ETRI Journal
• /
• 제26권5호
• /
• pp.493-496
• /
• 2004

An effective paging strategy is essential for improving the utility of radio channels. This paper proposes a two-step paging strategy which involves using base station paging agents to page a single cell at each paging. An analytical model is used to evaluate the performance of the proposed strategy. The proposed strategy is compared with the traditional simultaneous paging strategy and a recent proposal using the base station paging agents. The numerical results showed that the proposed strategy proficiently reduces paging cost on radio channels compared with other paging strategies.

• 한국통신학회논문지
• /
• 제31권3A호
• /
• pp.254-266
• /
• 2006

최근에 OFDM 기반 셀룰러 시스템의 Throughput 및 셀 커버리지를 향상시키기 위하여 SDMA(Spatial Division Multiple Access) 방식을 적용하는 자원 할당 방식에 대한 연구가 시작되고 있으나, 대부분의 OFDM/SDMA 기반 자원 할당 방식에 대한 연구는 시스템 Throughput 만을 최적화시키거나 단일 셀 환경에서만 적응이 가능한 한계가 있다. 본 논문에서는 사용자가 요구하는 트래픽 특성에 맞는 High Layer QoS(Quality of Service) 파라미터를 고려하면서, 시스템의 Throughput의 손실을 최소화하고 인접 셀 간 간섭을 고려하여 다중 셀 환경에서도 적용이 가능한 하향 링크 OFDM/SDMA 기반 자원할당 알고리즘을 제안하고, Ped A 및 다중 안테나 채널모델인 SCME (Spatial Channel Model Extensions) 채널에서 제안된 알고리즘 성능을 분석한다.

• 한국지반공학회논문집
• /
• 제36권12호
• /
• pp.87-97
• /
• 2020

최근에는 블록식 방파제의 단점을 보완하고 경제적인 설계가 가능한 타이셀소파블록에 대한 관심이 증가하고 있다. 타이셀소파블록은 각 블록을 말뚝으로 결속한 구조체로 활동저항성이 매우 우수한 특징을 가지고 있다. 본 연구에서는 실내모형실험을 통해 말뚝의 관입으로 인한 타이셀소파블록의 수평저항력 증가를 명확하게 확인할 수 있었다. 그리고 말뚝의 수평저항력은 블록의 상재하중에 상관없이 거의 일정하게 나타났다. 말뚝이 분담하는 수평저항력은 블록과 블록사이의 마찰이 담당하는 수평저항력 증감에 따라 변화하였다. 말뚝을 두개 관입시킨 실험에서는 싱글말뚝을 사용한 경우 보다 전반적으로 수평저항력이 크게 나타났으나 말뚝의 저항 거동은 다르게 나타났다.

• Journal of Microbiology and Biotechnology
• /
• 제9권5호
• /
• pp.593-603
• /
• 1999

Poly(3-hydroxybutyrate) (PHB) production by fermentation was examined under both restricted- and ample-oxygen supply conditions in a single fed-batch fermentation. Recombinant Escherichia coli transformed with the PHB production plasmid pSYLl07 was grown to reach high cell density (227 g/l dry cell weight) with a high PHB content (78％ of dry cell weight), using a glucose-based minimal medium. A simple flux model containing 12 fluxes was developed and applied to the fermentation data. A superior closure (95％) of the carbon mass balance was achieved. When the data were put into use, the results demonstrated a surprisingly large excretion of formate and lactate. Even though periods of severe oxygen limitation coincided with rapid acetate and lactate excretion, PHB productivity and carbon utilization efficiency were not significantly impaired. These results are very positive in reducing oxygen demand in an industrial PHA fermentation without sacrificing its PHA productivity, thereby reducing overall production costs.

• Journal of Magnetics
• /
• 제6권4호
• /
• pp.132-141
• /
• 2001

The switching characteristics and the magnetization-flop behavior in magnetic tunnel junctions exchange biased by synthetic antiferromagnets (SyAFs) are investigated by using a computer simulations based on a single-domain multilayer model. The bias field acting on the free layer is found to be sensitive to the thickness of neighboring layers, and the thickness dependence of the bias field is greater at smaller cell dimensions due to larger magnetostatic interactions. The resistance to magnetization flop increases with decreasing cell size due to increased shape anisotropy. When the cell dimensions are small and the synthetic antiferromagnet is weakly, or not pinned, the magnetization directions of the two layers sandwiching the insulating layer are aligned antiparallel due to a strong magnetostatic interaction, resulting in an abnormal magneto resistance (MR) change from the high-MR state to zero, irrespective of the direction of the free-layer switching. The threshold field for magnetization-flop is found to increase linearly with increasing antiferromagnetic exchange coupling in the synthetic antiferromagnet. Irrespective of the magnetic parameters and cell sizes, magnetization flop does not exist near zero applied field, indicating that magnetization flop is driven by the Zeeman energy.

• Journal of information and communication convergence engineering
• /
• 제20권2호
• /
• pp.137-142
• /
• 2022

Monolithic three-dimensional (M3D) logics such as M3D-NAND, M3D-NOR, M3D-buffer, M3D 2×1 multiplexer, and M3D D flip-flop, consisting of modularized M3D inverters (M3D-INVs), have been proposed. In the previous M3D logic, each M3D logic had to be designed separately for a standard cell library. The proposed M3D logic is designed by placing modularized M3D-INVs and connecting interconnects such as metal lines or monolithic inter-tier-vias between M3D-INVs. The electrical characteristics of the previous and proposed M3D logics were simulated using the technology computer-aided design and Simulation Program with Integrated Circuit Emphasis with the extracted parameters of the previously developed LETI-UTSOI MOSFET model for n- and p-type MOSFETs and the extracted external capacitances. The area, propagation delay, falling/rising times, and dynamic power consumption of the proposed M3D logic are lower than those of previous versions. Despite the larger space and lower performance of the proposed M3D logic in comparison to the previous versions, it can be easily designed with a single modularized M3D-INV and without having to design all layouts of the logic gates separately.

• 한국수소및신에너지학회논문집
• /
• 제32권4호
• /
• pp.245-255
• /
• 2021

Various studies about metallic bipolar plates have been conducted to improve fuel cell performance through flow field design optimization. These research works have been mainly focused on fuel cells for vehicle, but not fuel cells for building. In order to reduce the price and volume of fuel cell stacks for building, it is necessary to apply a metallic flow field, In this study, for a metallic flow field applied to a fuel cell for building, the effect of a change in the flow field shape on the performance of a polymer electrolyte membrane fuel cell was confirmed using a model and experiments with a down-sizing single cell. As a result, the flow field using a metal foam outperforms the channel type flow field because it has higher internal differential pressure and higher reactants velocity in gas diffusion layer, resulting in higher water removal and higher oxygen concentration in the catalyst layer than the channel type flow field. This study is expected to contribute to providing basic data for selecting the optimal flow field for the full stack of polymer electrolyte membrane fuel cells for buildings.

• 한국기계가공학회지
• /
• 제5권2호
• /
• pp.56-64
• /
• 2006

Rapid progress in many branches of technology has led to a demand on new materials such as high strength light weight alloys, powdered alloys and composite materials. The hydrostatic extrusion is essentially a method of extruding a clad rod through a die. In order to investigate the effect of the process conditions such as friction heat, deformation and clad thickness on the clad extrusion process, viscoplastic finite element simulations were conducted. A specific model for theoretical analysis used in this study is The single scalar variable version of Hart's model. An experiment also has been carried out using 1.5MN hydrostatic extruder with variable speed ram, LVDT and load cell for comparison. It is found that the hydrostatic extrusion pressure considering the effect of heat dissipation in this theoretical work was closer to the experimental pressure than the isothermal hydrostatic extrusion pressure.

• Journal of applied mathematics & informatics
• /
• 제6권1호
• /
• pp.31-50
• /
• 1999

We revisit the problems of testing three-factor classifica-tion models with a single observation per cell. A common approach in analyzing such nonreplicated data is to omit the highest order in-teraction and regard it as error. This paper discusses the use of a multiplicative model(See and Smith 1996 and 1998) which is applied on residuals in order to separate the variablility due to three-factor interaction from what is counted as random error. in particualr to test the significance of the interaction term we derived an approxi-mated distribution of the likelihood ratio test statistic based on the quadrilinear model known as Tucher's three-mode principal compo-nent model. The derivation utilizes the distribution of the eignevalues of the Wishart matrix.