• 전력전자학회논문지
• /
• 제13권1호
• /
• pp.70-77
• /
• 2008

기존 PDP 전원 시스템은 일반적으로 두 개의 절연형 트랜스포머를 사용하여 서스테인 전원($V_S$)과 어드레스 전원($V_A$), Multi단 전원($V_M$)으로 구성된다. 이들 각 전력 변환 회로에 트랜스포머 및 제어 IC가 사용되므로, 효율 저감 및 원가 상승, 소자 스트레스 등의 단점을 가지고 있다. 본 논문에서는 절연형 트랜스포머 한 개로 PDP 전원시스템을 구동하는 방식에 대해 제안한다. 제안된 방식은 DC/DC 전력단의 고효율 동작 및 신뢰성 개선은 물론 부피, 크기를 줄여 원가 저감에 기여한다. 또한, 제안된 방식은 PDP 구동 방식의 하나인 Address Display-period Separation(ADS)에 적합하다. 기존 방식과 제안된 방식을 비교하고 이론적 분석과 실험을 통해 제안된 방식의 우수성을 확인하였다.

• 한국정보통신학회논문지
• /
• 제12권2호
• /
• pp.282-289
• /
• 2008

PDP TV의 전력 효율을 향상시키기 위해서는 PDP의 구동과정에서 발생하게 되는 불필요한 전력소모와 AC 입력으로부터 원하는 DC를 얻기 위한 과정 중에 발생하는 전력 소모를 최소화하여야 한다. 일반적인 PDP 구동을 위한 입력 전원단은 2단 구조의 역률 보상형 컨버터를 채용하고 있으며, PDP 구동시 전력소모가 가장 큰 서스테인 드라이버와 리셋 회로의 구동전원을 공급하기 위한 별도의 DC-to-DC 컨버터를 필요로 한다. 그러나 이러한 회로의 구현은 저가의 PDP를 요구하는 시장 상황에 유연하게 대처하는데 많은 어려움을 준다. 따라서 본 논문에서는 최소의 전력 변환단계를 가지도록 서스테인과 리셋 회로의 전원 공급이 가능한 1단방식의 역률보상형 AC-to-DC 컨버터를 제안한다. 제안하는 시스템은 1단방식의 입력전원부 구성을 통해 전력 변환단을 최소화하여 전력 변환 중에 발생하는 손실을 최소화하며, PDP 서스테인/리셋 드라이버의 구동전압을 직접 공급하는 형태로 구성하여 시스템 부피의 감소, 원가 절감을 이룰 수 있다.

• 한국융합학회논문지
• /
• 제11권12호
• /
• pp.161-176
• /
• 2020

본 연구는 부모구성(부모, 한부모)에 따라 부모의 양육태도(감독, 애정, 합리적 설명)가 자아탄력성을 매개로 아동의 삶의 만족도에 미치는 영향력에 차이가 있는지 검증하고자 하였다. 이를 위해 한국청소년정책연구원의 KCYPS 초4 패널 데이터에서 총 310명의 데이터를 활용해 다집단분석을 실시하였다. 분석결과 첫째, 애정적 양육태도는 부모구성에 상관없이 삶의 만족도에 유의미한 정적 영향을 미쳤다. 둘째, 양육태도(애정, 감독)는 한부모가정 집단에서 자아탄력성에 유의미한 정적 영향을 미쳤으나 부모가정 집단에서는 유의한 영향을 미치지 않았다. 셋째, 애정적인 양육태도는 한부모가정 집단에서만 자아탄력성을 매개하여 자녀의 삶의 만족도에 유의한 영향을 미쳤다. 본 연구는 아동의 삶의 만족에 영향을 주는 요인들의 구조적 관계를 검증하고, 부모구성에 따라 그 양상이 달라짐을 밝혔다는 것에 의의가 있다. 마지막으로 연구의 한계와 실무적 개입방법, 후속 연구에서의 방향성 등을 제시하였다.

• Journal of Korea Trade
• /
• 제24권3호
• /
• pp.37-54
• /
• 2020

Purpose - This study is to investigate the determinants of suppliers' dependence on buyers in the home country by developing a theoretical model of innovative activities. The high dependence of auto parts suppliers on a single local buyer in South Korea due to firm ownership issues and incremental innovation is examined using data from a set of organizations that supply intermediate goods to this automotive manufacturer. Furthermore, we tested the moderating effect of FDI and global knowledge sourcing on the relationship between firm ownership and suppliers' dependence on the local buyer. Design/methodology - To test the hypotheses, we examined a sample of 101 suppliers over 10 years in the Korean automobile parts industry. In this empirical analysis, we utilized a fixed-effects generalized least squares model using panel data. Findings - In this study, domestic firms (automobile parts suppliers) were more dependent on a single local buyer (automobile assembler) than foreign-owned suppliers operating in Korea. In addition, incremental innovation was the mediating mechanism between domestic firms and dependence on the local buyer. To reduce this dependence on the buyer, we suggest two different international strategies: geographical diversification through FDI and global knowledge sourcing. Originality/value - Previous studies showed that asymmetric dependence between firms has many adverse effects. This study proved that domestic and foreign-owned suppliers have different levels of dependence on local buyers due to their heterogeneous characteristics and business strategies. We distinguish two different types of innovation - radical innovation and incremental innovation - that previous studies have often treated as equal when it comes to firm autonomy. Finally, we propose that both FDI and international knowledge sourcing as global strategies to weaken suppliers' asymmetric dependence on a single buyer.

• 한국중재학회지:중재연구
• /
• 제15권2호
• /
• pp.37-59
• /
• 2005

Trade between Korea and Quingdao, Sandongseung has been developed into Private Trade from the Tributary Trade of Silla. Today there are around 6,000 Korean Enterprises in Quingdao, being $22.5\%$ of total Quingdao trades and $60\%$ in the number of investments and monetary scale. Korea is in the first rank among Quingdao's trade parteners. Trade Dispute Settlement System, however, is still in poor condition. It should be improved for the activation of trade. The big solution is the Unification of Arbitration Procedure. For it, First, The staff of The Korean Commercial Arbitration Board should be dispatched to Quingdao Arbitration Commission. Second, there should be common arbitration rules between two institutes.(The Korean Commercial Arbitration Board and Quingdao Arbitration Commission). Third, a single arbitration panel should be made. Fourth, there should be the unification of methods in choosing the place of arbitration and arbitrators. Finally, a common arbitration institute should be installed.

• Journal of Information Display
• /
• 제9권3호
• /
• pp.33-38
• /
• 2008

A simple ray tracing model is developed to establish the relationship between the distributions of observed visible light and the excited Xe species in a PDP cell. The ray tracing model can obtain the density distribution of the excited Xe species. It shows the two independent discharge modes created during a single period of sustaining discharge. The maximum density of excited Xe species is located about $148{\mu}m$ away from the center of the gap between two sustaining electrodes. We also found the loss rate of VUV photons by comparing the luminance profile predicted in our theoretical model from experimental results. According to calculations based on our model, only about 22 percent of the photons can impinge the phosphor layer.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.283.1-283.1
• /
• 2016

Tin Oxide(SnO2) has been widely investigated as a transparent conducting oxide (TCO) and can be used in optoelectronic devices such as solar cell and flat-panel displays. It would be applicable to fabricating the wide bandgap semiconductor because of its bandgap of 3.6 eV. In addition, SnO2 is commonly used as gas sensors. To fabricate high quality epitaxial SnO2 thin films, a powder sputtering method was used, in contrast to typical sputtering technique with sintered target. Single crystalline sapphire(0001) substrates were used. The samples were prepared with varying the growth parameters such as gas environment and film thickness. Then, the samples were characterized by using X-ray diffraction, scanning electron microscopy, and atomic force microscopy measurements. We found that the strain evolution of the samples was highly affected by gas environment and growth rate, resulted in the delamination under O2 environment.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 추계학술대회논문집
• /
• pp.144-147
• /
• 2003

In order to evaluate spring-back behavior in automotive sheet forming processes, a panel shape idealized as a SS-rail has been investigated. After spring-back kas been predicted fer SS-rails using the finite element analysis, results has been compared with experimental measurements for three automotive sheets. To account for hardening behavior such as the Bauschinger and transient effects in addition to anisotropic behavior, the combined isotropic-kinematic hardening law based on the Chaboche type single-surface model and a recently developed non-quadratic anisotropic yield function have been utilized, respectively.

• 한국자동차공학회논문집
• /
• 제10권3호
• /
• pp.130-135
• /
• 2002

This study investigates the effect of curing method on the bonding strength of aluminum/CFRP composites. The surface of aluminum panel was treated by DC plasma. Lap shear tests and T-peel tests were performed based on the procedure of ASTM 906-94a and ASTMD1876-95, respectively. Test samples were fabricated by using the co-curing method and the secondary curing method. The results showed that the shear strength of test samples made by the co-curing method was 2.5 times greater than that of test samples made by the secondary curing method. The T-peel strength of the co-curing method case was almost 2 times greater than that of the secondary curing method case.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.957-961
• /
• 2005

A satellite component must withstand vibration caused when launch vehicle acoustics and engine rumble transfer to it through its structural mount. Components shall be subjected to environmental tests after manufacturing process thus the environmental test conditions are needed for component level test including vibration and shock. This paper deals with derivation of component-level environmental test specifications, especially for solar panels of STSAT-2(Science & Technology SATellite-2). Sine sweep random vibration, and shock test conditions were generated for solar panels by assuming the satellite as single-degree-of-freedom system with a base excitation.