• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.270-270
• /
• 2016

We fabricated an organic-inorganic nano laminated encapsulation layer using molecular layer deposition (MLD) combined with atomic layer deposition (ALD). The $Al_2O_3$ inorganic layers as an effective single encapsulation layer were deposited at 80 degree C using ALD with alternating surface-saturation reactions of TMA and $H_2O$. A self-assembled organic layers (SAOLs) were fabricated at the same temperature using MLD. MLD and ALD deposition process were performed in the same reaction chamber. The prepared SAOL-$Al_2O_3$ organic-inorganic nano laminate films exhibited good mechanical stability and excellent encapsulation property. The measurement of water vapor transmission rate (WVTR) was performed with Ca test. We controlled thickness-ratio of organic and inorganic layer, and specific ratio showed a lowest WVTR value. Also this encapsulation layer contained very few pin-holes or defects which were linked in whole area by defect test. To apply into real OLEDs panels, we controlled a film stress from tensile to compressive and flexibility defined as an elastic modulus with organic-inorganic ratio. It has shown that OLEDs panel encapsulated with nano laminate layer exhibits better properties than single layer encapsulated in acceleration conditions. These results indicate that the organic-inorganic nano laminate thin films have high potential for flexible display applications.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.831-833
• /
• 2004

A novel transflective-type LC mode with good display performance has been developed In order to drive both transmissive and reflective modes simultaneously without any modulation of gamma in a single-gap structure, we have introduced a new design concept in the reflective region, where the capacitance is separated into liquid crystal($C_{LC}$} and organic layer($C_{OL}$), playing a key role as a voltage divider in our cap-divided VA-mode. With this cap-divided method having both merits of simplifying process and good legibility, we have achieved good optical characteristics such as high contrast ratio and wide viewing angle in a single-gap homeotropic panel design.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.2
• /
• pp.152-158
• /
• 2015

Unlike photovoltaic systems installed on land, photovoltaic systems applied to the offshore plant have the characteristic that is installed in a limited space. For single point mooring plant, it is advantageous in terms of a reliable power supply to be installed in different directions of photovoltaic panels, because it is not possible to identify the position of the sun by rotation of the plant itself. Differences of installation angle between photovoltaic panels make a difference of the intensity of radiation irradiated on each photovoltaic panel, and it brings loss of generation quantity due to the partial shading. In order to provide a photovoltaic system suitable for offshore plant, the modeling which contains multiple photovoltaic panels controlled by single controller is performed. Then, it was examined how the output characteristics of the photovoltaic system change about the difference of the intensity of radiation that varies depending on the altitude of the sun. Finally, through the simulation, a development model of the photovoltaic system which is suitable for offshore plant is suggested.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1533-1536
• /
• 2006

A novel single cell gap transflective liquid crystal display was developed. By using the ink jet printing technology, we fabricated a transflective liquid crystal display with the hybrid alignment in the reflective region and the homogeneous alignment in the transmission region. Compared with the traditional technologies, our technology provided the advantages of easy process, high yield, fast throughput, and less material usage. We also applied this technology to the 2.4 inch prototype. This panel could be implemented in the handheld product applications.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.4 no.4
• /
• pp.28-33
• /
• 2005

Recently, trends of TFT-LCD toward larger scale and thinner thickness continue. so, demands of Light Guide Panel (LGP) which is to substitute for prism sheet are appeared. Functions of LGP obtaining polarization of light of the prism sheet as well as the incidence and reflection of light are demanded. This prism type LGP to complete functions of the existing LGP and polarization at once must be supported by micro machining technology of LGP surface. In this research, the machining characteristics of the various materials were analysed by shaping using V-shaped single crystal diamond tool. The characteristics are machined surface, machining force due to the variation of cutting depth. Used specimens are engineering materials, which are 6:4 brass, oxygen-free copper, Al6061, PC, PMMA. The FFT analysis of the measured cutting force was conducted. The cutting characteristics were analyzed and the optimum cutting conditions with materials were established.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.30 no.4 s.247
• /
• pp.306-313
• /
• 2006

Automated material handling system is being used as a method to reduce manufacturing cost in the semiconductor and flat panel displays (FPDs) manufacturing process. Those are considering switch-over from the traditional cassette system to single-substrate transfer system to reduce raw materials of stocks in the processing line. In the present study, the wafer transportation speed has been evaluated by numerical and experimental method for three propulsion nozzle array (face, front, rear) in an air levitation system. Test facility for 300 mm wafer was equipped with two control tracks and a transfer track of 1,500mm length. The diameter of propulsion nozzle is 0.8mm and air velocity of wafer propulsion is $50\sim150m/s$. We found that the experimental results of the wafer transportation speed were well agreed with the numerical ones. Namely, the predicted values of the maximum wafer transportation speed are higher than those values of experimental data by 16% and the numerical result of the mean wafer transportation speed is higher than the experimental result within 20%.

• Human Ecology Research
• /
• v.61 no.4
• /
• pp.635-645
• /
• 2023

This study examined the trends of domestic academic research on children of divorced families by classifying them by period, method, target, and subject. From 2000 to 2022, 105 papers published in 58 journals were surveyed. In terms of research methods, quantitative research was conducted using questionnaires and panel data. The subjects of the reviewed studies were mainly elementary school children, and there were many studies on both divorced single mother and child families as well as divorced single father and child families. By analyzing the core subjects of the study, papers related to children's personal adaptation accounted for the largest proportion, followed by problematic behaviors, psychological difficulties, such as depression and stress, and relationships. In conclusion, due to the high divorce rate in Korea there is a need to focus academic attention on the children of divorced families. To this end, it is necessary to study the adaptation and protection factors of the children of divorced families. More qualitative research should be conducted on children of divorced families of various ages, not just elementary school students.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.6
• /
• pp.1-8
• /
• 2018

FRP is a new material that is light, has high strength and high durability, and is emerging as a third construction material inside and outside of countries. However, very few studies have been done on curved FRP construction materials that can be used for tunnels or arched bridges. Because a small composite panel specimen is smaller than a full-size specimen, it can be used in a variety of experiments under different conditions. Therefore, in this study, experiments were performed on a void section, a solid section, a connected solid section, and a sand-coating solid section. The results of the experiment show that the connection of composite curved panels with longitudinal connections provides almost equivalent performance to that of a single panel. However, it is necessary to strengthen the connections, since the connections that are most susceptible to damage will break first.

• Journal of the Korean Society of Child Welfare
• /
• no.56
• /
• pp.221-251
• /
• 2016

The purpose of this study was to examine whether single-parent family status affects children's school adjustment through children's self-care and media exposure. In addition, the study investigated the mediating effects of self-protection and media exposure of children by analyzing whether single-parent family status has effects on school adjustment through self-care and media exposure of children. For this purpose, we used data of 1,916 students in the 4th grade who participated in the 4th year of the Korean Children and Youth Panel Survey (KCYPS). The results of the structural equation modeling showed that single-parent family environment not only had direct effects on the school adjustment, but also had effects on school adjustment through self-care of children. In addition, it was revealed that self-care of children influenced school adjustment through media exposure. One of the covariates, monthly income of households, did not affect the level of children's self-care. This result draws attention to the problems of the structural deficit of single-parent families. Therefore, political measures that correspond to the structural characteristics and special needs of single-parent families, along with their current financial support, are needed to improve the level of school adjustment of children from single-parent families.

• Korean Journal of Family Social Work
• /
• no.59
• /
• pp.55-79
• /
• 2018

The aim of study to compare the change trajectory of socioeconomic deprivation and depression the middle-aged in the single-person household and that in the Multi-person Household and to confirm the difference between the two groups. It is to examine the Longitudinal relationship between socioeconomic deprivation and depression. To do so, we studied 4,212 single-person household and Multi-person Household cases in the 7th to 11th Korea Welfare Panel Study (2012~2016). To verify the difference between both groups, we go on analysis with the latent growth curve model. According to our analysis, it is confirmed that the socioeconomic deprivation and depression of single-person households is higher than those of Multi-person Household and thus there is meaningful difference between both groups. Also, we reveal that the socioeconomic deprivation of Multi-person Household tends to decease while that of single-person household doesn't decline significantly. Furthermore, it appears that the socioeconomic deprivation is directly proportional to the depression in both groups. This research has meaningful significance in that we discussed in depth the relationship between the socioeconomic deprivation and depression of both groups, suggesting that welfare approach should be needed in the middle-aged in the single-person household.