• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.6
• /
• pp.31-38
• /
• 2005

Aerodynamic influence coefficient linearly relates pressure with downwash in panel method for load analysis in which the viscosity of a flow is ignored and the compressibility cannot be taken into account in transonic region. Since the planform of an aerodynamic surface determines the coefficient, the panel method has a limit to the analysis of low Reynolds number flow. The accuracy of the pressure distribution can be improved by a direct correction to the pressure or a correction to the downwash, which is considered the change of camber or thickness, using the aerodynamic coefficients from wind tunnel test as constraints. A premultiplying correction method as well as a postmultiplying correction method is applied to a micro air vehicle to provide more accurate aerodynamic pressure for trim and load analyses. Theoretical aerodynamic pressure is obtained from the panel method. Correction factor matrix and correct pressure coefficient are computed for the conditions with two constraints in addition to single constraint. The postmultiplying correction method gives a better improvement in pressure distribution on micro air vehicle due to the flow characteristics on it.

• Journal of Oriental Neuropsychiatry
• /
• v.35 no.1
• /
• pp.15-26
• /
• 2024

Objectives: The objective of this study is to develop a specialized clinical research protocol for acupuncture treatment specifically designed for disaster survivors based on insights from an expert survey. Methods: An expert panel comprising specialists in neuropsychiatry, acupuncture, and clinical research methodology was assembled. Initial data to inform the clinical research protocol design was collected utilizing open-ended responses, multiple-choice questions, and a 5-point Likert scale to gauge agreement levels. Next, this data was disseminated to a panel of experts. A cohesive clinical research protocol was then formulated during a core panel meeting by integrating insights from a panel of 10 experts. Results: The protocol developed herein entails a non-randomized controlled study involving participants aged 19~64 years old who have been identified as high-risk or cautious according to the National Trauma Center screening test. The study design includes the establishment of an active control group, which allows for the assessment of an additional effect through comparison with conventional therapy. The selected acupuncture approach involves a combination of manual acupuncture and ear acupuncture. For clinical outcome assessment, the Clinician-Administered Posttraumatic Stress Disorder Scale for DSM-5 was proposed to gauge trauma symptoms. Representative scales for various domains such as depression, anxiety, anger, insomnia, pain, and quality of life were also provided for reference. Conclusions: The developed protocol is anticipated to streamline the swift design and initiation of clinical trials during disaster scenarios. It is also designed to be scalable, thereby enabling its application in both non-randomized control group studies and single-group before-and-after comparisons.

• Journal of Family Resource Management and Policy Review
• /
• v.21 no.2
• /
• pp.25-50
• /
• 2017

Recently, concern about family safety is rising again as an important issue with the context of family healthiness and well-being in Korean society despite of the dramatic economic growth. The purpose of this study is to examine the status of family safety of singles and single-parent households and to investigate the effect of social capital on the level of their family safety. Data are from the 10th wave of Korea Welfare Panel Study analysing one-person households(N=2,017) and single-parent households(N=172). One-person households were categorized as three groups by age(the youths/middle-aged/the elderly) and single-parent households were also three by family types(mother-child/fahter-child/grandparent-child). The major results were as follows: First, the mean of family safety index was highest among middle-aged, while single youths had the fewest problems in terms of family safety. Second, social capital was found to vary by family structure. In the one-person households, all the levels of the social capital variables, including trust, bond, acceptance, and participation, differed significantly; only two variables, bond and embracement, differed in the single-parent households. Third, social capital differed between the low-income households and others significantly. Forth, the positive effects of social capital on overcoming family safety problems were investigated. In conclusion, social capital represents an alternative resource for overcoming economic hardship for low-income one-person/single-parent households, especially for middle-aged singles and father-child single-parent households. Based on these empirical results, theoretical implications were discussed with regard to family policy and programs.

• Korea Journal of Hospital Management
• /
• v.26 no.3
• /
• pp.68-83
• /
• 2021

Background: It is widely acknowledged that single bedrooms have many potential advantages compared to multiple bedrooms. However, Korea has a reimbursement system that patients have to pay the additional fee if they will use single bedroom or pay-bed (1-3 bedroom). There is little research on patients' bed selection and relationship between patient satisfaction and bed type in the Korean setting. Methods: Using the 2017 Korea Health Panel (KHP) Survey data, we modified bed type by two dichotomous variables: single bedroom vs. multiple bedroom (2+ bedrooms) and pay-bed (1-3 bedroom) vs. reimbursed bed (4+ bedroom). Multivariate logistic regression is performed to determine the factors affecting the patient's choice of room types. Multivariate regression analysis was conducted to examine how hospital room types are affecting patient satisfaction. Results: Single room and pay-bed (1-3 bedroom) use was influenced by patient age (19- years old), male, a person at work, hospitalizing in a clinic, and birth. After controlling variables of the behavioral model of medical utilization, the association between patient satisfaction and use of single bedroom & pay-bed (1-3 bedroom). Cause of hospitalization, major treatment, and recognition of unnecessary care are statistically significant variables on patient satisfaction. Conclusion: Although the single room is about the standard for newly built hospitals in western countries, it remains unclear that single room or pay-bed (1-3 bedroom) has positive effects on patient's outcomes and satisfaction. In this empirical study, the difference in patient satisfaction by bedroom type was not noticeable. In terms of bed management by hospital staff, securing patient credibility in hospital care is an important task. Patients' perception of whether medical staffs have encouraged unnecessary treatment or tests has a significant impact on patient's satisfaction.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.1 s.173
• /
• pp.38-51
• /
• 2000

The study on the mechanical behavior of a spot-welded specimen is largely divided into the quasi-static overload failure analysis and the fatigue failure prediction. The main issue in an overload analysis is to examine the critical loads, thereby providing a generalized overload failure criterion. As the welding spot forms a singular geometry of an external crack type, fatigue failure of spot-welded specimens can be evaluated by means of a fracture parameter. In this study, we first present the limit loads of 4 representative types of single spot-welded specimens in terms of the base metal yield strength and specimen geometries. Recasting the load vs. fatigue life relationships experimentally, obtained here, we then predict the fatigue life of spot-weld specimens with a single parameter denoted the equivalent stress intensity factor. This crack driving parameter is demonstrated to successfully describe the effects of specimen geometry and loading type in a comprehensive manner. The suggested fatigue life formula for a single spot weld can play a key, role in the design and assessment of spot-welded panel structures, in that the fatigue strength of multi-spots is eventually determined by the fatigue strength of each single spot.

• Journal of Power Electronics
• /
• v.18 no.5
• /
• pp.1479-1488
• /
• 2018

Power packet (PP) distribution system distributes power to different loads that share the same distribution cable in a packetized form. When compared with conventional power systems, a PP distribution system (PPDS) can reduce standby power, eliminate Point-of-Load (PoL) power conversion, and intelligently control the load demand from the source side. Due to the absence of PoL conversion, when multiple power sources at different voltage levels and conditioning requirements jointly send power to various loads at different voltage ratings, the generated voltage has an irregular shape. A large filter at each of the load sides is required to reduce such a large voltage ripple. In this paper, a single-inductor, multiple-input-single-output converter structure based multiple-energy-source mixer is proposed. It combines PP generation, maximum power point tracking (MPPT) of renewable energy sources (RESs) and filtering at the source side. To demonstrate the possible renewable energy integration, a PV panel is used as a power source together with other constant voltage sources. The PV power is approximately tracked using the constant voltage method and it is used for each of the PP generations. The proposed PP distribution system is experimentally verified and it is shown that a conventional PI controller is sufficient for stable system operation.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1997.07a
• /
• pp.173-176
• /
• 1997

A numerical analysis of the micro-discharge in an AC pplasma dispplay cell has been made using time-deppendent, 2-dimensional multi-fluid equations to understand the discharge pphysics of He-Xe discharge. The time deppendent distribution of the electron tempperature, densities of electrons, various ions and excited sppecies, and the effects fo the wall charge accumulated on the dielectric surface are obtained and comppared with the results of direct observation of time deppendent behavior of VUV and visible sppectra from single discharge cell observed using a gated, image intensified CCD to elucidate the discharge physics.

• Genomics & Informatics
• /
• v.15 no.3
• /
• pp.108-111
• /
• 2017

Recently developed computational methods allow the imputation of human leukocyte antigen (HLA) genes using intergenic single nucleotide polymorphism markers. To improve the imputation accuracy in HLA imputation, it is essential to increase the sample size and the diversity of alleles in the reference panel. Our software, MergeReference, helps achieve this goal by providing a streamlined pipeline for combining multiple reference panels into one.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.463-467
• /
• 2003

Optical architecture and experimental results on low cost multiview autostereoscopic projection display are presented. The display, containing only one high resolution projection panel and only one projection lens is capable of displaying multiview autostereoscopic images. Key components, applied in the display are segmented mirror for splitting the projection beam and one-dimensional diffuser with slanted axis of diffusion for viewing zone formation. Image distortions, inherent in the display have been compensated with opposite sign pre-distortion of projected perspective images.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.02a
• /
• pp.264-265
• /
• 2003

프로젝션 디스플레이 장치에 있어서 광학적인 효과 면에서 반사형 Light Valve (DLP, LCoS 등)를 주로 사용하고 있는데 이는 제작 프로세스 상 투과형에 비해 고 가격이므로 3판식 방법 보다는 단판식 방법이 선호되고 있다. 그러나 그림 1 에서 보이는 바와 같이 단판식의 경우 구조적 시스템은 단순하지만 광의 사용 효율이 3판식 방법에 비해 1／3 수준으로 낮아지기 때문에 광의 사용효율을 높이기 위해 여러가지 방법이 시도되고 있는 실정이다. (중략)