• Transactions on Electrical and Electronic Materials
• /
• v.13 no.4
• /
• pp.196-199
• /
• 2012

CdS thin film was prepared on glass substrate by chemical bath deposition in an alkaline solution. The optical properties of CdS thin film were investigated using spectroscopic ellipsometry. The real (${\varepsilon}_1$) and imaginary (${\varepsilon}_2$) parts of the complex dielectric function ${\varepsilon}(E)={\varepsilon}_1(E)+i{\varepsilon}_2(E)$, the refractive index n(E), and the extinction coefficient k(E) of CdS thin film were obtained from spectroscopic ellipsometry. The normal-incidence reflectivity R(E) and absorption coefficient ${\alpha}(E)$ of CdS thin film were obtained using the refractive index and extinction coefficient. The critical points $E_0$ and $E_1$ of CdS thin film were shown in spectra of the dielectric function and optical constants of refractive index, extinction coefficient, normal-incidence reflectivity, and absorption coefficient. The dispersion of refractive index was analyzed by the Wemple-DiDomenico single-oscillator model.

• Journal of the Korean Data and Information Science Society
• /
• v.28 no.6
• /
• pp.1257-1260
• /
• 2017

Single-person households recently have been rapidly increasing and one reason may be the increment in elderly single-person. Since the change of living patterns is relevant to the government policy direction, it is important to understand how single-person households are clustered and which factors have influence on them. In this study, we tried to detect spatial clusters of single-person households and low-income elderly single-person households after adjusting for deprivation index. A recently developed fused lasso for Poisson data was used for data analysis and we provided the details on how to use it in R. From these analysis results, we observed the effect of socioeconomic level on the clusters and explained the reason why spatial clusters are shown after adjusting for deprivation index.

• Journal of Yeungnam Medical Science
• /
• v.34 no.2
• /
• pp.222-230
• /
• 2017

Background: Varicella is the most common infectious disease reported despite the high vaccination rate. Interventions that target humans are particularly effective for varicella because humans are its only natural host. On the other hand, the existing national varicella surveillance systems lack the information to identify an outbreak. Therefore, a new index to assess varicella outbreaks was developed. Methods: The residential addresses of 2,718 varicella cases reported in Daegu in 2016 were converted to geographic coordinates and the distances between new varicella case and previous cases within 21 days were calculated from the date analyzed. Two cases were considered to be adjacent if the distance between them was less than 1 km. Finally, a proximity index was introduced by dividing the number of adjacent cases by the number of new cases on the date analyzed. Results: First, time-series charts and scatter plots were used to verify that the proximity index reflected the spatial closeness of the different varicella cases. The proximity index is helpful in identifying outbreaks from a list of single varicella cases. In addition, in this study, a new epidemic characteristic of varicella based on the proximity index was shown. Conclusion: The proximity index introduced in this study can be used to determine the likelihood of an outbreak from a single case of varicella, and it can be embedded in a web-based national varicella surveillance system that is currently in operation.

• Journal of the Korean Mathematical Society
• /
• v.47 no.2
• /
• pp.385-407
• /
• 2010

To study the relationship between the levels of chemical pollutants and the number of daily total hospital admissions for respiratory diseases and to find the effect of temperature/relative humidity on the admission number, Wong et al. [17] introduced the varying-coefficient single-index model (VCSIM). As pointed out, it is a popular multivariate nonparametric fitting technique. However, the tests of the model have not been very well developed. In this paper, based on the estimators obtained by the local linear technique, the average method and the one-step back-fitting technique in the VCSIM, the generalized likelihood ratio (GLR) tests for varying-coefficient parts on the VCSIM are established. Under the null hypotheses the new proposed GLR tests follow the $\chi^2$-distribution asymptotically with scale constant and degree of freedom independent of the nuisance parameters, known as Wilks phenomenon. Simulations are conducted to evaluate the test procedure empirically. A real example is used to illustrate the performance of the testing approach.

• Journal of Sensor Science and Technology
• /
• v.16 no.4
• /
• pp.254-258
• /
• 2007

A novel cure sensor based on the side-polished single mode fiber has been proposed and demonstrated. Two different UV curable epoxies were used to verify the feasibility of the side-polished single mode fiber as a high sensitivity cure sensor. The volume change of the epoxy by UV curing results in a corresponding change of the refractive index. The sensor can be used to monitor the curing process, the refractive index variation and the volume change of epoxy in real time during the UV curing process. In addition, small birefringence of the epoxy film can be detected using the sensor.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2008.11a
• /
• pp.69-70
• /
• 2008

태양전지에서 효율성은 높이고 가격은 낮추기 위한 연구가 활발히 진행이 되고 있다. 본 연구에서는 효율성 중에서도 single layer에서의 반사율에 초점을 맞추었다. 본 연구에서는 single layer 박막에서의 반사율에 대한 시뮬레이션을 수행했다. 적절한 refractive index를 갖는 박막을 사용했을 때, 반사율 감소를 simulation과 실험을 통해서 알 수가 있었으며, MgF2 박막물질을 사용했을 경우, 물질의 refractive index가 낮을수록 반사율이 낮아짐을 알 수 있었다. 시뮬레이션 결과와 실제 실험 결과를 비교했을 때, 실제 실험 결과의 반사율이 약 3%가량 큰 것으로 나타났다. 이는 반사방지막의 증착 불균일성에 기인하는 문제로 생각된다. 또한, refractive index의 차이에 의해 substrate에 따른 최적화 반사율을 얻는 조건이 달라짐을 실험을 통해 확인할 수 있었다. Glass의 경우는 MgF2가 silicon과 GaAs의 경우에는 ZrO2 나 HfO2가 낮은 반사율을 보였다.

• Korean Journal of Optics and Photonics
• /
• v.14 no.3
• /
• pp.298-305
• /
• 2003

We have calculated the single mode yield of index-coupled (IC) DFB lasers above threshold for several kL, and facet reflectivity combinations, and investigated the correlation between those results and the single mode yield as a function of f number at the threshold. As a result, there is little correlation between the single mode yield above threshold and the single mode yield as a function of f number at the threshold. The single mode yields above threshold for kL of 0.8 and 1.25 is larger than those for kL, of 2 and 3 due to the spatial hole burning effect. Also, we have investigated the effect of the reflectivity of the AR facet on the single mode yield for AR-HR and AR-CL combinations. For AR-HR combinations, the single mode yield increases as the reflectivity of the AR facet decreases. However, for AR-CL combinations, the reflectivity of the AR facet for the largest single mode yield exists. In the single mode yield calculations for IC DFB lasers in this paper, the single mode yield for kL of 0.8 with AR(1％)-HR combination is largest above threshold.

• The Journal of Asian Finance, Economics and Business
• /
• v.9 no.7
• /
• pp.153-171
• /
• 2022

To measure economic performance, customer satisfaction indices are constructed. This study proposes an index for banking and telecom, a significant evaluative system for comparing and enhancing customer satisfaction across the industries. The study suggests and examines amendments and improvements to the prior indices and incorporates ignored indicators to propose a punier index for Pakistan. The study is a pioneer in integrating online and offline indices into a single comprehensive model. The study is enriched by the Theory of Reasoned Action and Technological Acceptance Model. A sample of 320 respondents was used. The sample was divided based on gender and marital status. To authenticate the theoretical model, PLS-SEM was applied. We discovered nine latent variables that define customer satisfaction and conclude that a single model can be utilized for e-commerce enterprises as well. The index scores are comparable to the American index for banking and the Turkish index for telecom. Multi-group analysis (MGA) was used to comprehend the differences among the groups. This reveals that customization, design, reliability, and responsiveness induce satisfaction in telecom male and married customers. For the banking industry, the difference exists in complaint handling, customization, corporate image, perceived price, reliability, responsiveness, sentiments, convenience, and security to satisfaction links, image and complaint handling to loyalty links.

• Proceedings of the Safety Management and Science Conference
• /
• 2011.04a
• /
• pp.701-705
• /
• 2011

The paper reviews Cronbaha's coefficient to measure a single source of error. On the contrary to classical measurement theory, the generalizability study can be used in the social survey design to calculate Generalizability Index (GI) and Dependability Index (DI) for measuring multiple sources of errors of behavior evaluation. The study proposes application guidelines to implement R:($A{\times}B$) mixed models that are composed of random factor and fixed factor.

• Journal of the Korean Ceramic Society
• /
• v.42 no.3 s.274
• /
• pp.178-181
• /
• 2005

Silicon oxynitride (SiON) layers deposited upon a $SiO_2/Si$ buffer layer placed upon silicon wafers have been obtained by using PECVD from $SiH_4,\;N_2O$, and $N_2$. It can be seen that the refractive index, measured by using a prism coupler, for the SiON films can be varied between 1.4480 and 1.4958 at a wavelength of 1552 nm by changing the process parameters. Optical planar waveguides with a thickness of $6{\mu}m$ and a refractive index contrast ($\Delta$n) of $0.36\% have been deposited. Also, etching experiments were performed using ICP dry etching equipment on thick SiON films grown onto Si substrates covered by a thick $SiO_2$ buffer layer. A polarization maintaining single-mode fiber was used for the input and a microscope objective for the output at $1.55{\mu}m$. As a result, a low index contrast SiON based waveguide is fabricated with easily adjustable refractive index of core layer. It illustrates that the output intensity mode is a waveguiding single-mode.